Walker Edison C38B5 User manual

10” Rod
7” Rod
Right Top glass
Bottom glass
1
1
Left Top glass
8.75” Tube
6” Tube
2.5” Tube
7” Leg
6
7
8
9
10 4
5
1
3
9
2
6
387
33
10
3
4
Assembly Instructions
C38B5

Assembly Instructions
C38B5
Important: Make sure all parts are available for assembly
Follow instructions very carefully
Step 1: Lay right top glass (5) upside down on a soft surface.
Screw rods (1) into the three mounting plates. Be sure to tighten firmly.
Slide tubes (9) and rings (3) over middle rods as shown in the diagram.
Step 2: Slide left top glass (6) over middle rods as shown in the diagram.
Slide rings (3) over the middle rods.
Screw rod (2) into the mounting plate. Be sure to tighten firmly.
Step 3: Slide tube (7) and ring (3) over far right rod as shown in the diagram.
Slide tubes (8) and rings (3) over the other rods as shown in the diagram.
Step 4: Slide bottom glass (4) carefully over all rods.
Slide rings (3) over all rods as shown in the diagram.
Screw legs (10) into all rods. Be sure to tighten firmly.
Step 5: Turn upright slowly and carefully
For our most up to date assembly instructions or to request missing, lost, or broken parts, or for any other customer service
issue, please visit our website at www.walkeredison.com or call us at 877-207-5906 .