Walker Edison W44FPHBC User manual

Item # : W44FPHBC
Assembly Instructions
  
 .lkeon.com

   P.1

Attach cam bolts (B) to parts (1) and (2). Insert wooden dowels (A) into parts (2) and (17).
Attach cam bolts (B) to part (3). Insert wooden dowels (A) into parts (3,4) and (13).

Attach cam bolts (B) to parts (5,6) and (11,18). Insert wooden dowels (A) into parts (5) and (6).
Attach cam bolts (B) to parts (12). Insert wooden dowels (A) into parts (7) and (8).

Attach cam locks (C) to parts (13) and (17) to connect part (2) and part (3) as shown in the
diagram.
Attach cam locks (C) to parts (12) to connect to part (7) and part (8) as shown in the diagram.

Attach cam locks (C) to parts (11,18) to connect to part (5,6) as shown in the diagram.
Attach cam locks (C) to parts (7) and (8) to connect to part (3) as shown in the diagram.

Secure part (2) to frame assembly using bolts (E) as shown in the diagram.
Use cam bolts (C) to connect part (5) to assembled frame.

Use cam bolts (C) to connect part (6) to assembled frame.
Secure part (4) to frame assembly using bolts (E) as shown in the diagram.

Attach parts (9) and (10) to frame assembly using bolts (E) as shown in the diagram.
Secure top panel (1) to frame using cam locks (C) and (D) as shown in the diagram.

Insert shelf supports (F) and place shelf (15) carefully.
Insert shelf supports (F) and place shelf (16) carefully.

Place stickers (J) in designated areas as shown in the diagram.
Place fireplace (L) into frame from the rear.

Place stickers (J) in designated areas as shown in the diagram.
Be sure the fire place insert is positioned all the way forward in place.Use screw (M) to secure
the L-shape bracket (N) to the side panels (8). Position the adjustable L-bracket to hold the
Fireplace insert in place.

Be sure the fire place insert is positioned all the way forward in place.Use screw (M) to secure
the L-shape bracket (N) to the side panels (7). Position the adjustable L-bracket to hold the
Fireplace insert in place.