Walker Edison BU34COBC User manual

Item # : BU34COBC
Assembly Instructions
  
 
Revised 07 /2017
P.1

Secure cam bolt (B) to top panel (1).
Secure wine glass rack (15) to top panel (1) with screw (F).

Insert wooden dowel (A) to side panel (4,5). Secure cam bolt (B) to side panel (4,5), then turn
over side panel (5) and secure cam bolt (B) on it.
Insert wooden dowel (A) to side panel (3), shelf (6) and parts (8,9,10). Secure cam bolt (B) to
side panel (3).

Insert parts (8,9,10) into side panel (5), then insert and secure cam lock (C) to parts (8,10)
to lock it.
Insert parts (8,9,10) into side panel (4), then insert and secure cam lock (C) to parts (8,10)
to lock it.

Insert shelf (6) into side panel (3,5), then insert and secure cam lock (C) to shelf (6) to lock it.
Insert back panel (13) through side panel (3,5).

Use wrench (Q) to secure bottom panel (2) to side panel (3,4,5) with bolt (D).
Insert parts (17) to leg (16), then use wrench (Q) to secure it with bolt (H) and washer (J).

Use wrench (Q) to secure parts (17) and leg (16) to bottom panel (2) with bolt (G) and washer (J).
Insert back panel (13,14) through side panel (3,4,5).

Insert top panel (1) into side panel (3,4,5), then insert and secure cam lock (C) to side panel
(3,4,5) to lock it.
Secure plastic wedges (K) to back panel (13,14) with screw (L).

Place sticker (P) over holes as per diagram.
Insert part (7) as per diagram.

Secure hinge (E) to door (11,12) with screw (F), and secure handle (M) to door (11,12) with
screw (N).
Hold the door (12) and secure hinge (E) to side panel (5) with screw (F).

Hold the door (11) and secure hinge (E) to side panel (3) with screw (F).