Walker Edison W48FPCLCR User manual

Insert wooden dowel (A) into parts (2,4,11,12) ,then secure cam bolt (D) into parts (7,8)
with Philips head screwdriver as per diagram.

Insert wooden dowel (A) into parts (3,9,10) ,then secure cam bolt (D) into parts (3,9,10)
with Philips head screwdriver as per diagram.

Secure cam bolt (D) into part (1) ,then using cam lock (B) secure part (2) to part (1) with Philips
head screwdriver as per diagram.

Using cam lock (B) secure part (8) to part (10) ,part (7) to part (9) with Philips head screwdriver
as per diagram.

Using cam lock (B) secure parts (3,9) to part (11)with Philips head screwdriver as per diagram.

Using cam lock (B) secure parts (3,10) to part (12)with Philips head screwdriver as per diagram.

Using screw (E) attach part (6) to part (10) , part (5) to part (9) with hex key (F) as per diagram.

Using screw (E) attach part (13) to parts (3,4,5,6,9,10) with hex key (F) as per diagram.

Using bolt (G) attach part (14) to part (13) with hex key (F) as per diagram.

Using cam lock (B) secure part (1) to parts (3,9,10) , cam lock (C) secure part (1) to part (4) with
Philips head screwdriver as per diagram.

Place sticker (H) cover the holes as per diagram .

Insert the fireplace (L) to unit as per diagram.

Using screw (J) attach L shape bracket (K) to part (9) with Philips head screwdriver as per diagram.

Repeat the last step as per diagram.

Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the
bottom of the support leg to level the unit .