Walker's RAZOR XV 3.0 User manual

RAZOR XV 3.0 with Bluetooth® (GWP-BTN-BT)
DEVICE FUNCTIONS
•Turning the device on:
Press and hold the Power button for 2 seconds
•Changing Ambient Sound Volume:
Volume changes respectively when pressing the Ambient Volume Up or Down controls:
▪Volume Up increases volume by one stage.
▪Volume Down decreases volume by one stage.
When Sound Level Changes a single audible beep is produced as an indicator.
•When Ambient Volume reaches minimum Sound Level (Sound level 0 / Mute):
There will be an Audible double beep.
If Volume Down is pressed again at this level, sound level will not change and double beep will be produced again.
•When Ambient Volume reaches maximum Sound Level (Sound level 14 / +14dB):
There will be an Audible double beep.
If Volume Up is pressed again at this level, sound level will not change and double beep will be produced again.
•Changing Listening Modes:
Press both Ambient Volume Up and Down buttons at the same time.
▪The unit will cycle through the 4 available modes
oUniversal
oClear Voice
oHigh Frequency Boost
oPower Boost
•Charging the device:
Open the Micro USB Connector cover, plug in a Micro USB cable, then plug the other end into a USB power source or adapter.
While the device is charging the LED will remain constant ON. When fully charged the device’s LED will turn blue.
NOTE: When device is turned off, the ear buds will still provide passive NRR.
BLUETOOTH FUNCTIONS
•Pairing the device:
Press the BT Pairing button to enter Bluetooth pairing mode. When the unit is first turned ON it will search automatically for the last
paired device and then connect, if device is not found it will search for a few minutes and if not paired, Bluetooth will automatically enter
pairing mode.
On the device you want to connect to the headphone, follow the manufacturer’s instructions to locate and connect to “Razor XV 3.0”
(Note: Auto re-connects to previous last connected device during pairing if the BT device has been paired previously).
Once paired, the red LED will be flashing every few seconds. In Pairing Mode, the light will flash Blue then Red until paired.
•Answer Call:
Short press the BT Pairing button to answer incoming call.
•Reject Call:
Long press the BT Pairing button to reject the call.
•Cancel/end call:
Short press the BT Pairing button to cancel/end call.
•Call on hold/waiting:
During phone calling, if another new call is received, double press the BT Pairing button to switch from first call to second call.
To switch back to first call short press the BT button to end the second call and it will be switched to previous call.
•Last number redial:
Double press the BT Pairing button to re-dial the last phone number.
•Audio Pause/play:
Short press the BT Pairing button to pause/play music.
Skip a song by holding the BT volume up/Down

NRR Information
Although hearing protectors can be recommended for protection against the harmful effects of impulsive noise, the noise
reduction rating (NRR), is based on the attenuation of continuous noise and may not be an accurate indicator of the protection
attainable against impulsive noise such as gunfire.
The level of noise entering a person's ear, when hearing protector is worn as directed, is closely approximated by the difference
between the A-weighted environmental noise level and the NRR.
Walker’s LINK APP
FREE on Apple App Store and Google Play
All settings including, volume, environmental hearing modes, and sleep timer can be adjusted from the Walker’s LINK APP.
To connect to the app, simply open the app while the headset is powered on and connected via Bluetooth to your mobile
phone. The app will automatically synchronize with the headset and reflect the current settings.
Headset Ambient sound control and Bluetooth volume are controlled separately for a unique listening experience. The
Walker’s LINK APP will control the Ambient volume while Bluetooth volume is controlled using the volume buttons on your
headset or mobile device.
Ambient Sound Control: Controls the physical volume that can also found on the headset.
Environmental Hearing Modes: Four ambient audio profiles are available to create a custom listening experience. Universal,
Clear Voice, High Frequency Boost, and Power Boost can all be adjusted from both the headset and APP.
Inactivity Sleep Timer: To conserve battery life when the headset is not in use, the headset can be configured to power off
after a set time (2, 4, 6, 8 hours). The headset will power off when no button has been pressed for the designated time AND
when it is not connected to a device via Bluetooth.

LIMITED WARRANTY
Walker’s warranties this product to the original purchaser to be free from defects in materials and workmanship, under normal use
and conditions for a period of one year parts from the date of purchase.
Under this warranty, this device will be replaced or repaired at our option. Copy of the original receipt or gift receipt, is required for
any warranty service. To enact the warranty, the customer is required to contact our Customer Service Group at 877-268-8490 to
receive a Return Authorization (RA) number PRIOR to sending the product back.
This warranty is void if any of the following occur:
1. The device is not accompanied by a copy of the receipt or gift receipt from the original purchaser.
2. The device has been tampered with, opened or punctured.
3. The device has been immersed in water or other liquids, allowed to be filled with dirt or dust, or otherwise physically abused.
4. The one year limited warranty has expired. Please inquire about other options from your Customer Service Representative.
This shall be the exclusive written warranty of the original purchaser and neither this warranty nor any other warranty, expressed or
implied, shall extend beyond the 12-month period listed above. In no event shall Walker’s, Inc. be liable for consequential property
damage, or consequential personal injury. (Some states do not allow limitations on implied warranties or exclusions of consequential
damages, so that these restrictions may not apply to you). This warranty gives you specific legal rights, and you may have other rights,
which vary from state to state.
Record Serial # for future reference: Serial #
IC NOTE
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS-102 and compliance with RSS-102 RF
exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS-102 etla conformité à l'exposition de
RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf.

Return bottom portion to Walker’s, Inc. – PO Box 535189 –Grand Prairie, TX 75053-5189
Warranty Registration
Model: Date of Purchase:
Purchased From
City: State: Zip:
Primary Use:
Your Name:
Address:
City: State: Zip:
Email Address: Serial #:
V0