Walker Walker 9er User manual
1
User Manual
English
2
ank you for choosing our product! We truly hope you’ll enjoy
a greater mobility with your Trionic Walker, and that you will
experience many pleasant moments with it.
By choosing a Trionic Walker you will enjoy a whole range of
benets that will improve your access to dierent environme-
nts, and hopefully it will help increase your quality of life.
User Manual
Please read the User Manual carefully before use and follow all
the guidelines, especially the Safety Instructions.
e Trionic Walker 9er is made for both indoor and outdoor use.
e Trionic Walker 12er and Walker 14er are primarily made for
outdoor use.
Dear user,
3
Trionic Walker
e Walker 9er is your perfect rollator to use both indoors
and outdoors. With its 9” wheels and extra-soft PU-tires you’ll
enjoy high comfort and a well-balanced performance. It’s light
and compact for easy storage and transport. e Walker 12er
is your faithful companion when you are heading outdoors. Its
12” wheels and air-lled tires guarantee a very comfortable ride,
and it’s perfect for every urban and outdoor area. e Tronic
Walker 14er is the world’s rst rollator with 14” big wheels. At
Trionic we call it the “terminator” as it leaves all other rollators
trailing behind it. is machine helps you walk longer distances
at a quicker pace and with greater ease. All the new Trionic Wal-
ker rollators are equipped with a synchronized steering feature
(patent pending) that eliminates the problems with shimmying
and skewed swivel wheels.
e Walkers are tested and approved according to the interna-
tional standard ISO-11199-2:2005, for a maximum user weight of
150 kg.
4
Safety
• Both brakes should be locked in par-
king mode before you use the seat.
• Before you start walking with the
Walker, make sure it’s completely
unfolded.
• Be extra careful in steep terrain and
on slanting ground.
• e stability of the Trionic Walker
is tested with a basket load of 5 kg.
If you load additional weight to the
basket, make sure to distribute the
weight evenly in the basket.
Technical Data
Walker 9er Walker 12er Walker 14er
Min. height: 74 cm 76 cm 81 cm
Max. height: 94 cm 96 cm 100 cm
Width: 66 cm 69 cm 69 cm
Length: 68 cm 81 cm 85 cm
Seat height: 62 cm 62 cm 62 cm
Seat width: 43 cm 46 cm 46 cm
Wheel size: 9”/23 cm 12”/31 cm 14”/36 cm
Size folded: L68xW28xH82 cm L81xW28xH88 cm L85xW28xH90 cm
Size folded w/o wheels: L61xW28xH74 cm L67xW28xH76 cm L67xW28xH76 cm
Weight: 9,7 kg 10,9 kg 11,9 kg
Weight w/o wheels: 6,8 kg 6,8 kg 6,9 kg
Max. user weight: 150 kg 150 kg 150 kg
The Product
5
1. To unfold the Walker, pull the
two hand grips away from each
other.
2. Lock the Walker in walking
mode by pressing the two rear
corners of the seat distinctly
downwards. You should hear a
“click” when the Walker locks
into walking mode.
First Time Use
3. Before using the walker, make
sure that the unfolding mecha-
nism has locked securely in
place.
4. Adjust the grips to the correct
height by using the quick-release
levers, as described in the chap-
ter “Grip Height Adjustment”.
6
To operate the motion brake,
pull the brake lever upwards.
Brake with both levers at the
same time.
To release the parking brake,
brake in the same manner as for
using the motion brake.
You can engage the parking
brake in 3 dierent ways.
Option 1:
Push the lower red parking trig-
ger downwards with your index
nger, while you pull the brake
lever at the same time. Make
sure that the parking brake is
engaged, and that the Walker
does not move.
Motion Brake Parking Brake
Option 2:
Pull the upper red parking trig-
ger rearwards with your thumb,
while you pull the brake lever at
the same time. Make sure that
the parking brake is engaged.
NOTE: Always lock both parking
brakes before sitting down on
the seat.
Option 3:
Use both hands. Pull the upper
red parking trigger rearwards
with one hand, while you pull
the brake lever with your other
hand. Make sure that the par-
king brake is engaged.
7
1. Release the quick-release lever
positioned just above the seat by
folding it outwards horizontally.
Grip Height Adjustment
2. Slide the hand grip up-/down-
wards to your preferred grip
height.
3. Lock the hand grip at the cho-
sen height by folding the quick-
release lever to its closed posi-
tion.
4. NOTE: Do not operate the
quick-release levers like wing
nuts or screws.
8
Grip Angle Adjustment Folding the Walker
e angle of the grips can be
adjusted so that you get a com-
fortable hand position and an
optimal support.
1. Loosen the screw on the rear
end of the grip with a 4 mm allen
key.
2. Turn/rotate the grip to your
chosen angle, and lock it in place
by tightening the screw again.
1. Grab the seat handle and pull
it upwards and the Walker will
start folding.
2. Push the two grips handles
fully together.
9
1. To unfold the Walker, pull the
two hand grips away from each
other.
2. Lock the Walker in walking
mode by pressing the two rear
corners of the seat distinctly
downwards. You should hear a
“click” when the Walker locks
into walking mode.
Unfolding the Walker
3. Before using the Walker, make
sure that the unfolding mecha-
nism has locked securely in
place.
Seat
Always engage both parking
brakes before you use the seat.
10
1. Open the quick-release on
the front wheel by folding it out-
wards.
2. Unscrew the nut on the inside
of the fork a bit, so that the wheel
can be detached from the fork.
3. Remove the front wheel from
the fork.
Detaching the Front Wheels
4. NOTE: Do not operate the
quick-release levers like wing
nuts or screws.
11
1. Enter the front wheel into the
fork, with the quick-release lever
positioned on the outside of the
Walker.
2. Tighten the nut on the inside
of the fork, so that the quick-
release gets correctly tensioned
when closed.
3. Close the quick-release on the
front wheel by folding it inwards.
Make sure that the quick-release
lever is correctly closed, prefe-
rably in a position behind the
fork when seen in the traveling
direction of the Walker.
Attaching the Front Wheels
4. NOTE: Do not operate the
quick-release levers like wing
nuts or screws.
12
1. Press the steel button at the
center of the rear wheel, and the
wheel can be detached from the
Walker.
1. If the brakes function poorly,
loosen the adjustment screw on
each brake lever (counterclock-
wise) and lock it in position by
screwing the lock-nut towards
the handle (clockwise).
2. To attach the rear wheel to the
frame again, press the steel but-
ton and slide the wheel onto the
axle.
3. Check that the wheel is pro-
perly attached by pulling/
pushing it sideways.
Contact Trionic, your retailer, or
the person responsible for servi-
cing your Trionic Walker, if the
brakes still function poorly.
Attaching the Rear Wheels Brake Adjustment
13
Safety Instructions
Before use, check that your Trionic Walker functions properly:
• Check the function of the motion and parking brakes.
• Make sure that the frame is locked in unfolded walking mode.
• Check that the grips are properly secured at the correct height.
• e user’s weight may not exceed 150 kg.
• Do not use the Trionic Walker as a wheel chair or for transpor-
ting people.
• e Walker is aimed to be used as a walking aid.
• An annual control of the product is recommended to ensure its
function, either by your dealer or service representative autho-
rized by Trionic.
• Do not use a defect Walker.
Service Instructions
In order to maintain function and safety, make sure the following is
carried out regularly:
• Clean the Walker with normal dish washing liquid, water and a
dishcloth. Make sure it’s properly dried.
• Keep the wheels clean with dish washing liquid, water and a
plastic brush.
• Check that screws and levers are tightened properly.
• If your Walker is not in perfect condition: please immediately
contact your retailer/dealer or service representative authorized
to service your Trionic Walker.
Trionic does not take responsibility for any alterations (adjustments
or inadequate repairs) done to the product without prior authoriza-
tion.
14
Guarantee
Trionic Walker includes a 10-year guarantee, excluding parts that
are subject to normal wear (tires, tubes, brake pads, brake cables,
brake cable housings, grips and textile parts). e guarantee is
valid from the date of purchase, and covers Trionic original parts
only.
___________________________________________________________
Serial number
___________________________________________________________
Date/Stamp/Signature
CE - Trionic Sverige AB ensures that the above mentioned product
meets the relevant legislation requirements (1993:584) concerning
medical products as well as the specications contained in the pro-
visions for medical products (LVFS 2003:11). e product meets the
specications in EC’s directive regarding medical technical products
93/42/EEC.
10
YEAR PRODUCT
GUARANTEE*
*
P
A
R
T
S
S
U
B
J
E
C
T
T
O
N
O
R
M
A
L
W
E
A
R
E
X
C
L
U
D
E
D
.
★★★★★
10
JAHRE PRODUKT-
GARANTIE*
*
1
0
J
A
H
R
E
G
A
R
A
N
T
I
E
A
U
S
S
E
R
V
E
R
S
C
H
L
E
I
S
S
T
E
I
L
E
.
★★★★★
10
YEAR PRODUCT
GUARANTEE*
*
P
A
R
T
S
S
U
B
J
E
C
T
T
O
N
O
R
M
A
L
W
E
A
R
E
X
C
L
U
D
E
D
.
★★★★★
10
JAHRE PRODUKT-
GARANTIE*
*
1
0
J
A
H
R
E
G
A
R
A
N
T
I
E
A
U
S
S
E
R
V
E
R
S
C
H
L
E
I
S
S
T
E
I
L
E
.
★★★★★
10
ÅRS PRODUKT-
GARANTI*
*
G
A
R
A
N
T
I
N
O
M
F
A
T
T
A
R
I
N
T
E
V
A
N
L
I
G
A
S
L
I
T
A
G
E
D
E
L
A
R
.
★★★★★
10
ÅRS PRODUKT-
GARANTI*
*
G
A
R
A
N
T
I
N
O
M
F
A
T
T
A
R
I
N
T
E
V
A
N
L
I
G
A
S
L
I
T
A
G
E
D
E
L
A
R
.
★★★★★
Seminariegatan 29 C
SE-752 28 Uppsala, SWEDEN
www.trionic.se, [email protected]
Tel.: +46 8 522 100 50, Fax.: 08-522 100 59
MAX
SN: 201501-240151
ART no: 24-00-000
Max Weight: 150 kg
Width: 69 cm
Length: 81 cm
Height: 76-96 cm
2015-01
Primarily for outdoor use
ISO 11199.2:2005
S
15
Label
e Walker is tested and
approved according to
the provisions in the
international standard for
walking aid products: ISO
11199-2:2005 «Walking
aids manipulated with
both arms».
e user’s weight may not
exceed 150kg.
Environmentally Friendly
e Trionic Walker is manufactured in the way to have as little
negative impact on the environment as possible during its lifecycle.
When the product has served its purpose it can be scrapped and
the parts can be recycled.
• e product’s aluminium components are separated from the
remaining parts when sorted for recycling. e parts are sorted
into metal, plastic and mixed materials.
• e greater part of the product is made of aluminium and steel.
• Examples of components made of mixed materials are the
wheels and tubes.
• If you are uncertain of how to handle the recyclable material,
please contact your local authorities, as dierent municipali-
ties/ recycling companies follow dierent recycling methods.
Trionic Sverige AB is a member of REPA, PRO Europe (e Green
Dot) and fully implements the European Directive on Packaging
and Packaging Waste dated December 20, 1994.
Manufacturing Date
Serial Number
Read the manual
before use
According to ISO
standard it is primarily
for outdoor use.
Max. and Min.
Height
Width
Max. User Weight
Manufacturer
Article Number
Aid approved according to
93/42/EEC
Product Code: EAN 13
Length
Trionic Sverige AB
Seminariegatan 29 C
SE-752 28 Uppsala
SWEDEN
Web: trionicwalker.co.uk
Shop: www.trionic.biz
E-mail: [email protected]
Tel: +46 -(0)8 522 100 50
Fax: +46 -(0)8 522 100 59
Corp.ID: 556698-1527. VAT Reg. No SE556698152701
This manual suits for next models
2
Table of contents
