WAMGROUP SEPCOM Vertical User guide

2
fax
e-mail
internet
+ 39 / 0535 / 618111
+ 39 / 0535 / 618226
[email protected]
www.wamgroup.com
WAMGROUP S.p.A.
Via Cavour, 338
41030 Ponte Motta
Cavezzo (MO) - ITALY
Manual No. SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
Latest Update: July 2022
ORIGINAL INSTRUCTIONS IN ENGLISH
EN
ASSEMBLY AND
MAIN INSTRUCTIONS
FOR USE AND
MAINTENANCE
SEPINDV, SEPPIGV - SOLID-LIQUID
SEPARATOR
SEPCOM®
Vertical
V2-150-3
V2-200-3

All the products described in this catalogue are manufactured according to WAMGROUP S.p.A. Quality System procedures.
The Company’s Quality System, certied in July 1994 according to International Standards UNI EN ISO 9002 and extended to
the latest release of UNI EN ISO 9001, ensures that the entire production process, starting from the processing of the order to the
technical service after delivery, is carried out in a controlled manner that guarantees the quality standard of the product.
This publication cancels and replaces any previous edition and revision.
We reserve the right to implement modications without notice.
This catalogue cannot be reproduced, even partially, without prior written consent by the Manufacturer.

SEPCOM®Vertical
INDEX 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
III
TABLE OF CONTENTS
1.0 GENERAL INFORMATION ...................................................................................................................... 1
1.1 Scope of the Manual ......................................................................................................................... 1
1.2 Symbols ............................................................................................................................................ 2
1.3 Glossary and terminology ................................................................................................................. 4
1.4 Manufacturer’s data and identication of equipment......................................................................... 5
1.5 Request for assistance...................................................................................................................... 6
1.6 Warranty............................................................................................................................................ 6
1.7 Exclusion of responsibility ................................................................................................................. 7
2.0 INFORMATION REGARDING SAFETY................................................................................................... 8
2.1 General safety prescriptions ............................................................................................................. 8
2.2 Safety prescriptions for transport and handling................................................................................. 8
2.3 Safety prescriptions for installation ................................................................................................... 9
2.4 Safety prescriptions for use and operation........................................................................................ 9
2.5 Safety prescriptions for maintenance and replacement of components ........................................... 9
2.6 Safety recommendations on biological risks ................................................................................... 10
3.0 TECHNICAL INFORMATION ..................................................................................................................11
3.1 General description of equipment ....................................................................................................11
3.2 Main components............................................................................................................................ 12
3.3 Operating principle .......................................................................................................................... 13
3.4 Permitted use .................................................................................................................................. 13
3.5 Improper use not permitted ............................................................................................................. 13
3.6 Noise level....................................................................................................................................... 14
3.7 Environmental operating limits ........................................................................................................ 14
3.8 Overall dimensions and technical features ..................................................................................... 14
3.9 Safety and information signs........................................................................................................... 15
3.10 Safety devices............................................................................................................................... 16
4.0 INFORMATION REGARDING HANDLING AND TRANSPORT............................................................. 19
4.1 Type of packaging ........................................................................................................................... 19
4.2 Reception of goods ......................................................................................................................... 21
4.3 Lifting and unloading methods ........................................................................................................ 21
5.0 INSTALLATION AND FIXING................................................................................................................. 23
5.1 Safety prescriptions for installation ................................................................................................. 23
5.2 Assembling the compensator tank .................................................................................................. 23
5.3 Fixing of the support frame ............................................................................................................. 25
5.4 Assembly......................................................................................................................................... 26
5.5 Electrical connections and motor wiring diagram............................................................................ 28
5.6 Electrical connection ....................................................................................................................... 30
5.7 Inspection........................................................................................................................................ 31
6.0 INFORMATION REGARDING USE ....................................................................................................... 32
6.1 Gear reducer ................................................................................................................................... 32
6.2 Start up and normal operation......................................................................................................... 33
6.3 Reuse after long shut-down ............................................................................................................ 34

SEPCOM®Vertical
INDEX 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
IV
7.0 INFORMATION REGARDING MAINTENANCE ....................................................................................35
7.1 Scheduled maintenance table.........................................................................................................35
7.2 Cleaning the equipment (the machine) ...........................................................................................35
7.3 Cleaning the screen ........................................................................................................................36
7.4 Gear reducer lubrication..................................................................................................................36
7.5 Changing the oil ..............................................................................................................................37
8.0 REPLACEMENT OF PARTS..................................................................................................................38
8.1 Safety recommendations for replacement ......................................................................................38
8.2 Replacing the electric motor............................................................................................................38
8.3 Replacing the screw........................................................................................................................40
8.4 Replacing the screw sections..........................................................................................................44
8.5 Inspecting the screen ......................................................................................................................47
8.6 Replacing the mechanical seal of the lower bearings .....................................................................51
8.7 Disassembling the gear reducer .....................................................................................................66
8.8 Returning the equipment (the machine)..........................................................................................73
8.9 Dismantling and disposal ................................................................................................................73
9.0 INFORMATION REGARDING FAULTS .................................................................................................74
9.1 Trouble-shooting .............................................................................................................................74
9.2 Check-list in case of fault ................................................................................................................75
AATTACHMENTS.....................................................................................................................................76
A1 Drive unit lubricants Table................................................................................................................76
A2 Lubricants table for mechanical parts ..............................................................................................77
A3 List of maintenance tools.................................................................................................................77

1.0 GENERAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
1
SEPCOM®Vertical
This Manual has been prepared by the Manufacturer to provide the operating technical information for instal-
lation, operation and maintenance of the equipment concerned.
The Manual, which is an integral part of the equipment concerned, must be preserved throughout the life of the
equipment in a known easily accessible place, available for consultation whenever required.
If the Manual is lost, damaged or becomes illegible, contact the Manufacturer for a copy specifying the serial
number of the equipment.
If the equipment concerned changes ownership, the Manual has to be handed over to the new owner as part
of the equipment supply.
The Manual is meant for specialist technical personnel appointed and authorized by the Manufacturer, owner
and installer to act on the equipment concerned for which specic technical skills in the sector concerned are
necessary (electrical, mechanical, etc.).
The illustrations may di󰀨er from the actual structure of the equipment concerned but do not interfere with the
explanation of the operations.
In case of doubt, contact the Manufacturer for explanations.
The Manufacturer reserves the right to make changes to the Manual without the obligation to provide prior
notication, except in case of modications concerning the safety level.
The technical information included in this Instruction Manual is the property of the Manufacturer and therefore
has to be considered as condential.
It is forbidden to use the Manual for purposes other than those strictly linked to the operation and maintenance
of the equipment concerned.
This information is provided by the Manufacturer in the original language (English) and can be translated into
other languages to satisfy legislative and/or commercial requirements.
1.1 Scope of the Manual

1.0 GENERAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
2
SEPCOM®Vertical
To highlight certain parts of the text, for purposes of safety, or to indicate important information, certain symbols
are used, the meaning of which is described below.
It is important to comply with and scrupulously follow the information highlighted by the symbols.
Danger - Warning
Indicates situations of serious danger which, if ignored, can be risky for the health and safety of per-
sons.
Caution
Indicates that appropriate behaviour must be adopted to avoid posing risk for the health and safety of
persons and avoid causing economic damage.
Important
Indicates particularly important technical information which must not be ignored.
1.2 Symbols

1.0 GENERAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
3
SEPCOM®Vertical
Symbol
representation
Symbol description
Danger sign: indicates danger of electric shock caused by the presence of powered
components inside the junction box or control panel.
Obligation: read this Manual before carrying out any action on the equipment con-
cerned.
Forbidden: indicates that it is forbidden to lubricate or adjust moving parts.
Danger: indicates danger of serious injury to limbs if the internal moving parts of the
equipment are exposed. Before opening inspection or maintenance hatches or doors
isolate the equipment concerned from the electrical energy sources.
Information: indicates the direction of rotation of the electric motor.
Obligation: indicates the hooking points for lifting each section of the equipment con-
cerned.
Forbidden: indicates it is forbidden to introduce hands into the equipment.
List of safety and information symbols

1.0 GENERAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
4
SEPCOM®Vertical
Operator: person appropriately trained and authorized by the Production Manager for setting up the equip-
ment concerned and carrying out routine maintenance.
Installer: organization with specialized technicians and appropriate equipment for carrying out risk-free instal-
lation and extraordinary maintenance.
Specialist technician: person responsible for and authorized by the Manufacturer, owner or installer to act on
the equipment; must have specic technical skills depending on the sector concerned (electrical, mechanical
etc.). The specialist technician, in addition to being familiar with the working of the equipment concerned, must
be familiar with the working of the plant or equipment on which the equipment concerned is installed.
Routine maintenance: includes all the actions necessary to keep the equipment in good working conditions,
to ensure greater operating durability and to keep the safety requisites constant.
Extraordinary maintenance: all the actions meant to keep the equipment in perfect working order.
Setting in safety conditions: all the precautions the authorized personnel must adopt before acting on
the equipment concerned.
The precautions are listed below.
- Ensure that the equipment concerned is disconnected from all the mains and appropriate devices
are used to prevent these from being reconnected accidentally.
- Ensure that all the moving parts of the equipment have come to a complete stop.
- Ensure the temperature of the equipment concerned is such that it does not burn.
- Provide appropriate lighting in the area around the operations.
- Wait for the material to be handled inside the equipment or machine concerned to settle down com-
pletely.
1.3 Glossary and terminology

1.0 GENERAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
5
SEPCOM®Vertical
Important
Do not change the data on the identication plate.
Keep the ID plates clean, intact and legible as regards the data they contain.
If the ID plate is damaged or is no longer legible (even just one informative element on it) contact the
Manufacturer for a new ID plate and replace it.
The ID plates shown identify the equipment concerned and its main components.
The plates show the reference necessary for operating safety.
1.4 Manufacturer’s data and identication of equipment
1 - Gear reducer identication plate
A) Year of manufacture
B) Manufacturer’s name and address
C) Identication of gear reducer
D) Production batch
E) Weight of the drive unit
A
B
E
D
C
Kg
COD: 063001947
v. Cavour 338 Ponte Motta/Cavezzo (MO)-ITALY
Year
WAM S.p.A.
WAMGROUP
SEPCOM®Vertical

1.0 GENERAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
6
SEPCOM®Vertical
2 - Identication of the separator
The plate is xed to the lower side of the feeding hop-
per.
A) Year of manufacture
B) Manufacturer’s name and address
C) Separator type
D) Serial No.
E) Weight of the separator
3 - Motor identication plate
A) Motor type
B) Production batch
C) Manufacturer’s name and address
D) Weight of the electric motor
E) Year of manufacture
F) Technical Data
A
B
F
C
ED
IP 55
Ins.cl.: F
Batch No.
Type Year
Kg.
Hz
VRpm A
kW cosφ
WAM
®
COD: 063001359 REV.04
3 ~ Via Cavour 338
WAM
Ponte Motta
S.p.a.
(MO) - ITALY
di Cavezzo
*01* Made in
China
01
For all technical assistance, contact the Manufacturer’s service network.
For all requests, provide the equipment identication data, the type of problem encountered and all other infor-
mation which could be useful for identifying the problem.
The conditions for validity and applicability of the warranty are specied in the sales contract.
1.5 Request for assistance
1.6 Warranty
D
CE
A
B
Serial N0.:
TYPE:
Year
Kg
Strada degli Schiocchi, 12 MODENA (MO) - ITALY

1.0 GENERAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
7
SEPCOM®Vertical
The equipment is delivered according to the specications indicated by the Buyer in the order and the condi-
tions valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
equipment if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, main-
tenance etc. have not been carried out in compliance with the warnings described in this Manual, and in ac-
cordance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the equipment concerned is used:
- improperly;
- by unauthorized persons and/or persons not su󰀩ciently trained for installation, operation and maintenance;
- with modications made to the original conguration without the Manufacturer’s permission;
- with spare parts that are not original or are not specic for the model;
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
equipment.
1.7 Exclusion of responsibility

2.0 INFORMATION REGARDING SAFETY 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
8
SEPCOM®Vertical
Read the Instruction Manual carefully and strictly follow the instructions it includes, especially those
regarding safety.
Most accidents at the workplace are caused by negligence, failure to follow the most elementary safety
regulations and incorrect or improper use of tools and equipment.
Accidents can be prevented and avoided by taking due care, using suitable equipment and adopting
adequate preventive measures.
Apply and comply with the standards in force regarding workplace hygiene and safety.
The personnel trained for and authorized for the operations has to have the psychological/physical
requisites, experience in the sector concerned and the necessary technical skills for carrying out the
operations assigned to them.
All workers involved in any kind of operation must be prepared, trained and informed as regards the
risks and the behaviour to be adopted.
Pay attention to the meaning of the notices applied on the equipment, keep these legible and respect
the information indicated.
Use instruments, equipment and tools that have been approved and are intrinsically safe, and cannot
alter the safety level of the operations or damage the equipment during installation, use and mainte-
nance.
Modications to the equipment components should not be made for any reason whatsoever, without
the Manufacturer’s permission.
Carry out all the handling and transport operations in accordance with the procedures and instruc-
tions shown on the packaging and in the Manual supplied.
All the operations must be performed by qualied authorized personnel.
Those authorized to carry out the handling operations must have the capabilities and experience re-
quired to adopt all the necessary measures to guarantee one’s safety and the safety of persons di-
rectly involved in the operations.
The chosen features of the lifting and handling means (crane, bridge crane, forklift truck etc.) must
take into account the weight to be handled, the dimensions and the gripping points.
During lifting use only accessories such as eyebolts, hooks, shackles, spring hooks, belts, slings,
chains, ropes etc., that have been certied and are suitable for the weight to be lifted.
During handling respect the prescriptions applicable for handling loads.
Keep the position of the equipment concerned or the sections and the loose components horizontal,
keep the load low and make all the necessary movements gently.
Avoid sudden manoeuvres, dangerous oscillations and rotations, accompanying the movements man-
ually and place the load gently on the ground.
2.1 General safety prescriptions
2.2 Safety prescriptions for transport and handling

2.0 INFORMATION REGARDING SAFETY 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
9
SEPCOM®Vertical
Before starting with installation, a “Safety Plan” must be implemented to safeguard the personnel di-
rectly involved and those who carry out operations in the surrounding area.
All the laws must be strictly applied, especially those concerning workplace safety.
Before proceeding with installation operations, mark o󰀨 the work area to prevent access by unauthor-
ized persons.
The electrical connections must be made in compliance with the standards and laws in force.
The person in charge of making the electrical connections has to ensure that the required standards
and laws are respected before testing.
Do not tamper with the equipment concerned by using any kind of device to obtain performances dif-
ferent from those designed.
All unauthorized changes can a󰀨ect the health of people and the integrity of the equipment.
The operators have to exclusively wear protective clothing and have to be equipped with appropriate
individual protection devices for carrying out the operations and as required by the safety and work
accident prevention standards.
Before use, ensure that all the safety devices are installed and that they are working properly.
During operations, prevent access to the work area by unauthorized persons.
Remove all obstacles or sources of danger from the work area.
Climbing, walking or seating on the machine placing and/or improper machine loads on it are strictly
forbidden.
Danger - Warning
Before any intervention on the machine, make sure it is switched o󰀨 and disconnected from all energy
sources; using suitable devices to lock them, and make sure it cannot be an accidentally reconnected
to prevent it from starting (LockOut - TagOut procedures).
Maintain the equipment concerned in the conditions of utmost e󰀩ciency compliant with the mainte-
nance plan provided by the Manufacturer.
Good maintenance apart from preserving the functional features and essential safety features over
time, will also allow extending the working life of the equipment concerned and achieving the best
possible performance.
Strictly follow the procedures indicated in the Manual, especially those concerning safety.
Ensure that all the safety devices are active and working properly.
Mark o󰀨 the work area in such a manner as to prevent the access of unauthorized persons.
Replace the worn and damaged components exclusively with original spare parts, whose safety, reli-
ability and interchangeability have been undoubtedly established.
2.3 Safety prescriptions for installation
2.4 Safety prescriptions for use and operation
2.5 Safety prescriptions for maintenance and replacement of components

2.0 INFORMATION REGARDING SAFETY 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
10
SEPCOM®Vertical
Apart from invalidation of the warranty, the Manufacturer declines all responsibility for damage to
objects and harm to persons deriving from the use of non-original spare parts or due to modications
made during repairs without express written authorization.
Use the oil and lubricants recommended by the Manufacturer.
Do not dump polluting material (oil, grease, paint, plastic etc.) in the environment, but carry out waste
separation disposal depending on the chemical composition of the various products in compliance
with the legislation in force.
On completion of maintenance or replacement operations, before resuming production, check that no
foreign bodies (rags, tools etc.) have been left inside the equipment concerned.
2.6 Safety recommendations on biological risks
Danger - Warning
Depending on the type of product processed by the equipment, it is recommended to wear appropriate
personal protective equipment against the biological risk which could not be eliminated (residual risk)
in case of contact with the equipment or with its components.

3.0 TECHNICAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
11
SEPCOM®Vertical
SEPCOM®Vertical is a solid-liquid screw press type separators.
For the proper operation of the equipment it is important for the uid to be processed to be pumpable.
The separator consists of:
- inlet module
- separation and conveying module
- compaction module
The feeding section is provided with compensator tank and overow outlet; is designed so to allow the owing
of the material directly into the separation module. The inlet is positioned at the bottom side of the equipment.
The separation and conveying section consists of two vertical screw conveyors having opposite directions of
rotation inside the screen through which the separated fraction ows while the conveyors push the solid frac-
tion towards the compaction module in the upper side of the equipment.
The compaction module consists of a counter-pressure diaphragm that compacts the solid material that gets
discharged through the special chutes this equipment is provided with.
The vertical solids-liquid screw press SEPCOM®Vertical was designed to be integrated to other systems, part
of an installation, in order to realize a well determined application.
IMPORTANT NOTE
It is recommended the installation of an hours counter in the control panel that allows the counting of the opera-
tion hours of each separator component.
This aspect is very important especially as regards possible wear problems.
Important
The terms “equipment”, “separator ” used in this manual refer to the same machine.
As components meant for installation in a plant, the separators- not fully provided with safety means
- have to be considered “partly completed machinery”. Therefore, they do not bear an EC marking.
It is forbidden to start the equipment unless the machine/plant in which it is to be installed has been
declared compliant with the Directive 2006/42/EC and further modications.
3.1 General description of equipment

3.0 TECHNICAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
12
SEPCOM®Vertical
3.2 Main components
SEPCOM®Vertical
Item Description
1Diaphragm pressor
2Load-bearing structure
3Screen basket
4Screws
5Liquid phase discharging hopper
6Compensator tank
7Material inlet pipe
8Overow
9Venting air pipe
10 Support feet
11 Motor and gear reducer.
12 Nipples
13 Separated solids outlet chutes
14 Guard
CONFIGURATION OPTIONS
Model V2-150-3 V2-200-3
Screw SINT®ER, SINT®EC SINT®ER, SINT®EC
Screen basket 0,25 - 0,40 - 0,65 mm 0,20 - 0,45 - 0,70 mm
Compression 0, 1, 2, 3 0, 1, 2, 3

3.3 Operating principle
3.4 Permitted use
3.5 Improper use not permitted
3.0 TECHNICAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
13
SEPCOM®Vertical
The material to be separated is fed by means of a pump into the separator and then inside the separator where
it gets conveyed by the two screw into the screen. The diaphragm applies a counterpressure that squeezes
the material and pushes the liquid fraction through the screen basket. The solid fraction will then get collected
downstream the separator.
The separator SEPCOM®Vertical has to be used for the separation of zootechnical wastes or similar animal slurry
according to the indications provided by manufacturer on condition that the material can be pumped into the equip-
ment by a suitable chopper pump and on condition that the solid content does not exceed 5 % and 12 % TS.
The separator is to be used in the absence of overpressure or negative pressure.
Every other use must be considered improper, therefore not permitted.
Given that fact that SEPCOM®Vertical is to be installed in a plant, the working of the equipment and its per-
formances are also strictly linked to the entire plant condition and layout, it is therefore very important to follow
all the recommendations listed at page 27 (Installation diagram), at page 36 (Scheduled maintenance table)
- particularly as regards the maintenance operations frequency (cleaning of the screen and the screw) which
depend on the chemical and physical features of the material processed - and the indications given at page
34-35 (Start up and normal operation).
These are the base conditions to be followed before the Manufacturer is claimed for supposed failures of the
equipment.
Do not operate the equipment unless the plant or the equipment in which it was incorporated is declared com-
pliant with the requirements of relevant national and local provisions in force.
It is forbidden to use the equipment in potentially inammable or the explosive atmosphere (ATEX).
IT IS COMPULSORY:
- providing the proper earth grounding of the machine.
- reading carefully the indications and the danger signs applied on the machine.
IT IS FORBIDDEN:
- removing the danger and warnings signs applied on it.
- removing the protections and the safety devices it has been provided with.
- using the equipment with no guards and safety devices.
- using the equipment if faulty (excessive noise level, vibrations, etc.).
- using the equipment after repairs and/or maintenance without having setting it in safety start up conditions.
- using the equipment other than according to the indications given.

3.6 Noise level
3.8 Overall dimensions and technical features
3.0 TECHNICAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
14
SEPCOM®Vertical
For an exact identication of the equipment concerned, see the identication plate. TECHNICAL CATALOGUE
No.1.
The noise level of the SEPCOM®separator does not exceed 80 dB(A).
Danger - Warning
Depending on the installation site, the installer must adopt suitable systems (barriers, etc.), if neces-
sary, to maintain the noise levels within the legally permitted limits.
3.7 Environmental operating limits
Unless otherwise specied, the equipment concerned may be used only within the limits indicated.
- Altitude: less than 1,000 m at sea level
- Environmental temperature: between 0 °C and + 40 °C
- Cold climates: with temperature less than 5 °C use oil and lubricants suitable to the operating temperature.
Important
It is forbidden to use the equipment for materials reaching a temperatures value higher than 60°C; in
case of outdoor temperatures below 0°C, the equipment has to be provided with the necessary protec-
tions. In case of thermal conditions beyond the recommendations, contact the Manufacturer.

3.9 Safety and information signs
3.0 TECHNICAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
15
SEPCOM®Vertical
Danger - Warning
Follow the signs on the plates.
Ensure the plates are legible; otherwise clean them and replace the damaged ones, applying them in
their original position.
N.B.: See the page 2, 1.2 Symbols
Danger - Warning
Danger of shearing and dragging: do not insert the limbs inside the separator.
SEPCOM Vertical

3.0 TECHNICAL INFORMATION 2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
16
SEPCOM®Vertical
3.10 Safety devices
Inspection hatches:
The access to inspections hatches is not necessary during operation of the equipment; their use is meant for
routine or extraordinary maintenance operations.
Danger - Warning
Before starting up the machine, it is compulsory closing the inspection hatches by tting the screws
provided in their original position to avoid they accidentally open.
Important
Use the special device when opening the inspection hatches. The equipment is provided with the due
warning signs.