Wansview Q7 User manual

Quick
Installation Guide
Indoor Security Camera
Product Diagram
What's in the Box:
Photosensor
Lens
Microphone
Micro Sd Card Slot
Speaker
Reset button
Power port
Indicator lights
Micro-USB Matching screws Mounting Accessories
Camera Power Adaptor
Indicator Lights Status
Light Status
Red light on
Red and blue light alternately flashing
Blue light flashing
Blue light solid
Red light quickly flashing
Camera Status
Camera is powered on
Waiting to connect now
Connecting to Wi-Fi
WiFi connection succeeded
1. Reset camera to factory setting
2. Camera is upgrading firmware
3. Add Q7 Camera
Warm note: Please make sure your router is connected to Internet.
User's Guide
Go to the App Store or Google Play to search and download the "Wansview Cloud" APP on your
smartphone. Or scan below QR code to get the APP.
1. Download and Install
Open the "Wansview Cloud" APP and register an account with your email and activate it.
Tips: Your password must be 8-16 characters, and contains at least the following three
categories: numbers, uppercase letters, lowercase letters, or special characters.
2. Register Account
① Click "Add device" or "+" ② Select the Q7 camera ③ Device Power On
④ Wi-Fi Setup ⑤ Scan the QR Code ⑥ Wait for Connection
7
Download on the

Made in China
After-service: [e-mail]
[e-mail]
Manufacturer：Shenzhen Viewtech Industrial Co., Ltd
Address: 206, Block 1, Shangrong Industrial Zone, No.2 Baolong Road 5,
Baolong Community，Baolong District，Longgang, Shenzhen, China
Micro SD card slot
Please rotate the camera head up, then you will see the micro SD card slot
(capacity 8GB-128GB).
Where is the micro SD card slot?
⑦ Pair succeeds ⑧ The camera is online ⑨ Live Video
Tips:
1. This indoor camera only works with 2.4GHz Wi-Fi, 5GHz Wi-Fi is not supported!
2. Please put the camera near to the router during setting up the camera, after connection
succeeds, you can place the camera in another place.
Note:Put the camera close to the router(3 feet) during setting up the camera.
FAQ
Please press the reset button on the camera for 5 seconds until the red light flashes quickly and
the camera says "reset is successful", Please wait for about one minute, then the camera will
flash blue and red light alternately and you can reconnect it now.
The camera can not connect to Wi-Fi?
1. The invited member should download the Wansview Cloud app, and register a new account
first.
2. The main account should open the Wansview cloud app, tap "Settings-invite family
members"--press < --choose Country and then enter the invited member's account.
Share the camera to another account.
3. The invited member needs to open the Wansview cloud app and then click "Receive".If he/she
doesn't receive the invitation, please close the app and then open it again.
UK
US