Wansview W7 User manual

wanstiew
—
uensuiew
W7 =
Quick Installation Guide
2K Outdoor Security Camera
"'\/

Catalog:
Introduction of the Camera 01-02
Download APP and Register Account - 02
Add Devices .03
Select Model 03
CAMENa SEtUP - -~ - <o 04
W SEEUP <=~ = = = o e e 04-05
Wait fOF CONMECHON ~= - = = - = == = = < = e oo 06

Introduction of the Camera
A
Antenng
———
|
Indicator Light
Infrared Lights
Lens
Microphone
Photosensor
TF Card Slot
Reset Button
Speaker

Indicator Lights Status /4
Light status Camera Status
Red light on Camera is powered on
Red and blue light alternately flashing Waiting to connect now
Blue light flashing Connecting to Wi-Fi
Blue light solid Wifi connection succeeds
Red light quickly flashing
1. Reset camera to factory setting
2. Camera is upgrading firmware
Warm note : Please make sure your router is connected to Internet
Download APP and Register Account
1. Download and Install APP
Go to the App Store or Google Play to search and download the "Wansview Cloud" APP on your
smartphone. Or scan below QR code to get the APP.
Dol the
[ App Store
oogle Play
2. Register Account
Open the "Wansview Cloud" APP and register an account with your email and activate it
Tips: Your password must be 8-16 characters, and contains at least the following three categories:
numbers, uppercase letters, lowercase letters, or special characters.
And then you will receive an activation code in your e-mail, please enter this code in the APP, and log in.
If you don't receive the activation code, please contact us with your account :
[V [email protected] 8 [email protected] We will help you activate it

(]
oevees + Add Device
D Before Add device on the APP, please be sure that your
smartphone is connected to 2.4Ghz WiFi. 5Ghz WiFi is not
supported.
And then click "Add Device" or click "+"
< Select device type.
Select W7
— @ Select Model W7
S0 ¢
o

« Camera setup.
« WicFisetup,
PCamerTest 245,
YS——r—
Camera Setup
@ Place the camera near the router, within 1 meter.
Power on the camera, wait 1-2 minutes to see if the
camera’ s indicator flashes blue and red alternatively? If so,
click “Flashing”.
WiFi Setup
@ Your 2.4Ghz WiFi name is obtained automatically, enter
your WiFi password, click “ & button to check whether
the WiFi password is correct, note there shouldn’ t exist
space.
* If your APP doesn’ t recognize the WiFi name automatically,
please activate the GPS and location authorization on the
settings of your smartphone. And turn the previous page
“Camera Setup” and then click “Flashing” to check
whether APP recognize the WiFi name automatically.

. pr— 5 Place the QR code 3-8 inches in front of the camera lens. If
you hear “QR code scanning i successful”, please press
“Next”
Diantyounear 17

Wait for Connection
€ waitforcomection pairsucceeded a ] Devices
-OK -
117 smconds et e o
WWCoROGeSZTCUMO
) ®
The blue light flashes quickly, meaning the WiFi is connecting.
The blue light flashes slowly, meaning the WiFi is connected.
Until the blue light i solid, meaning the paringis successful.
You can modify the name of the camera and click "OK" to view the live video.

Questions and Answers:
If you can't find solutions from next, please contact our customer service for help with a photo of the
label (includes a QR code) on the bottom of the camera
B [email protected] [ [email protected]
Fail to Scan ?
If you fail to scan the QR code on the smartphone, please try the following solutions:
D Make sure the indicator light flashes red and blue alternatively. If not, press the reset button until
the red light flashes quickly.
@ Adjust the distance between the camera’ s lens and the smartphone 3-8 inches, adjust the
brightness to medium, double-click the QR code to enlarge it to scan.
fitstill fails, tap “Didn’ t hear it” and connect WiFi via Soft-AP method.
Fail to Connect WiFi ?
If you fail to connect WiFi for the first time, please try the following solutions:
@ Be sure that the WiFi is 2.4Ghz, our camera doesn’ t support 5Ghz.
(@ Please activate the GPS and location authorization on the settings of smartphone.
3 Tap “ & ” button to check WiFi password is correct. There shouldn't exist spaces.
@ Before camera setup, make sure the indicator light flashes red and blue light alternatively.
Red Light is Steady ? Can’ t Reset Successfully ?
Ifyou can’ t reset successfully, and the red light is always steady, please try the following solutions:
Hold the “Reset” button for about 15 seconds to see whether the red light flashes quickly?
~ I so, please wait about 1-2 minutes to wait the red and blue light flash alternatively, and then you
can reconnect WiFi

APP shows "Offline" ?
(@ Ensure the router is working properly. Reboot the router and camera to see if the camera
reconnects after that.
@ If not, reset the camera by holding the Reset button 5-10s and reconnect the camera.
(3 The distance between the camera and router should be within 5 meters, so camera can receive
good WiFi connection.
Cloud Storage
"Wansview Cloud" APP is FREE, Cloud Service is Optional.
Even though you don't want to activate the cloud storage, you can also use the camera normally.
APP Can't Recognize the SD Card ?
@ Make sure the SD card can work properly by testing the write and read files functions on a
computer via a SD card reader, then insert the SD card in the camera.
@ Please power off the device before inserting the SD card.
® The device only supports FAT32 formate, 18GB Max; please format the SD card into FAT32 format
on your computer via a card reader.

After-service E-mail : [email protected] [email protected]
TEL: [phone] Available time: 6 pm - 3 am (PST Time) from Monday to Friday
https://www.facebook.com/WansviewOfficial
https://www.youtube.com/WansviewOfficial
Wansview Official Web:www.wansview.com
(o)
-
-+