Ware Pet Products 15060 User manual

®
item #15060
overall dimensions
38.875" L X 38.875" W X 79" H
98.75 cm x 98.75 cm x 200.5 cm
ready to assemble
Cat patio
If you have any questions or concerns
about this product contact our customer
service department at 1-800-295-2243
Mon-Fri 8:00 – 4:00 MST or email us at
[e-mail] assembly instructions
warepet.com
79"Height
(200 cm)
hardware
1- ⁄" Bolt
#902642
26 pcs
1- ⁄" Bolt with nut
#902644
18 pcs Small L-Wrench
#902647
1pc
Bolt Wrench
#902643
1pc
Wind Vent
#902648
1pc
Sand Bag
#902645
4pcs
Large L-Wrench
#902646
1pc

V
W
R
Q
U
T
S
H
GF
Y
X
C
D
A
Y
X
B
E
I
J
O
P
N
M
L
K
x1 x4 x9
x6
A
A
B
B
E
E
N
M
I
E
warnings & cautions
For stability, insert tent stakes/anchors through
ports on parts E, F, G, & H. (**Tent stakes not included)
This Cat Patio is for cat use only, it is not
suitable for children.
Keep all tools and instructions in a safe
place for future reference.
For additional stability, secure provided
Sandbags to eye-rings on parts E, F, G, and H.
Always supervise your pet when using this item.
Inspect product regularly and re-tighten
screws as needed.
Thank you for your purchase. Follow these detailed instructions to properly assemble your new Cat Patio.
To ensure assembly success, please read all care guides carefully prior to assembly and installation.
!
•
•
•
•
•
•
•
•
•
Cat Patio should be placed on a flat level
surface for stability.
Follow instructions in this manual to avoid
personal injury to pet or property damage.
Keep small parts away from pets/children
to avoid choking hazard.
Note: pole side with 2 holes
faces up on parts X & Y.
Align holes closest to pole F.
Note: pole side with 2 holes
faces up on parts P & O.
Align holes closest to poles G & K.
Note: pole side with 2 holes
faces up on parts W & V.
Align holes closest to pole L.
STEP 1 STEP 3 STEP 4
STEP 2
Note: wire hooks
face towards the
exterior of cage
on posts B, C, & D.
Note: wire hooks face towards the
oor of cage on post A.

Z1
Z2
Z3
Z4
Z1
Z4
Z3
Z2
x6 x18
x3
parts list
cleaning & care Spot clean only with gentle liquid detergent mixed with warm water.
Due to ongoing product improvements, product photo on packaging may not match finished product. UPDATED: 02-13-20
Note: pole side
with 2 holes
faces up on
parts Z1, Z2, & Z3.
STEP 5 STEP 6 STEP 7
Continued next page
Frame Bar A #902611
Frame Bar B #902612
Frame Bar C #902613
Frame Bar D #902614
Frame Bar E #902615
Frame Bar F #902616
Frame Bar G #902617
Frame Bar H #902618
Frame Bar I #902619
Frame Bar J #902620
Frame Bar K #902621
Frame Bar L #902622
Frame Bar M #902623
Frame Bar N #902624
Frame Bar O #902625
Frame Bar P #902626
Frame Bar Q #902627
Frame Bar R #902628
Frame Bar S #902629
Frame Bar T #902630
Frame Bar U #902631
Frame Bar V #902632
Frame Bar W #902633
Frame Bar X #902634
Frame Bar Y #902635
Frame Bar Z1 #902636
Frame Bar Z2 #902637
Frame Bar Z3 #902638
Frame Bar Z4 #902639
Cat Patio Cover #902640
Shelf (x3) #902641

If you have any questions or concerns about this product contact our customer service
department at 1-800-295-2243 Mon-Fri 8:00 – 4:00 MST or email us at [email protected]om
warepet.com
Due to ongoing product improvements, product photo on packaging may not match finished product.
STEP 8 STEP 9 STEP 10
Note: Connect the cover
to the metal frame by
hooking the metal
grommets over the
hooks on the frame base
sections A, B, C, & D.
Optional Step: To stabilize the Cat Patio ll the four sand bags
with sand and attach to the eye-rings on parts E, F, G, & H.
Note: In areas with wind gusts,
the wind vent can be adjusted
to increase air circulation by
moving the position of the
lower nut as indicated.
** To expose the eye-rings
unzip the side panels of
the Cat Patio cover.
Carefully tip the Cat Patio on its side to secure
the cover to the metal grommets on
frame bars A, B, C, & D.
***NOTE: Connect frame bar A last.