Waring Wt90b User manual

Warming Tray

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

WT90B

LOW MEDIUM

HIGH

1

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed, including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against risk of electrical shock, do not put

appliance in water or other liquid.

3. Do not touch surfaces that may be hot. Always use hot

pads or potholders until unit cools.

4. Use handles and knobs provided.

5. Unplug from outlet when not in use, before putting on

or taking off parts and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate the Waring ProTM Warming Tray or any

other electrical equipment with a damaged cord or plug,

or after the unit malfunctions, or is dropped or damaged

in any manner. Return it to the nearest authorized service

facility for examination, repair, or adjustment.

8. The use of attachments not recommended or sold by

Waring may cause re, electric shock, or injury.

9. Do not use outdoors.

10. Always check that the control is off before plugging

cord into wall outlet. To disconnect, turn the control

knob to Off, then remove plug from wall.

11. Do not place near hot gas/electric burner or heated oven.

12. Do not let cord hang over edge of table or counter, or

touch hot surfaces.

13. It is recommended that this appliance not be moved

when it contains hot oil or other hot liquid.

14. Close supervision is necessary when any appliance is

used by or near children.

15. Do not use appliance for other than intended use.

16. DO NOT USE PLASTIC DISHES OR PLASTIC WRAP

ON TR AY.

2

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY TIPS

SHORT CORD INSTRUCTIONS

A short power-supply cord is provided to reduce the risk

resulting from becoming entangled in or tripping over a

longer cord.

If a longer detachable power-supply cord or extension cord

is used, (1) the marked electrical rating of the extension cord

should be at least as great as the electrical rating of the

appliance, and (2) the longer cord should be arranged so

that it will not drape over the countertop or tabletop where it

can be pulled on by children or tripped over unintentionally.

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to alert

the user to the presence of uninsulated dangerous

voltage within the product’s enclosure that may be

of sufficient magnitude to constitute a risk of fire

or electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instruction in the

literature accompanying the appliance.

LOW MEDIUM

HIGH

3

PARTS

Before first use, clean the warming tray base with a mild

detergent and a soft moist cloth. DO NOT SUBMERGE THE

WARMING BASE OR LET THE PLUG COME IN CONTACT

WITH WATER. DO NOT ALLOW WATER TO SPILL OR

SEEP INTO THE FRAME. Rinse and wipe dry.

Heat the warming base for approximately 10 minutes at a

maximum setting. NOTE: Temporary smoking might occur.

This is normal during initial use.

1. Warming tray

2. Power On indicator light

3. Adjustable thermostat

4. Thermo-insulated handles

1

2

34

4

OPERATION

NOTE: For best results, set warming tray to maximum

heat setting to warm up quickly. Then adjust thermostat

to desired temperature. Serving temperature is from

155˚F (min.) – 200˚F (max.)

1. Plug unit in. The red power On light will come on. Set

thermostat to desired temperature setting.

2. NOTE: Food placed on warming tray should be FULLY

cooked and already hot. The Waring Pro™ Warming

Tray is designed to keep food warm only. This product

is not a cooking appliance.

3. Foods containing little or no liquid should be kept on

a lower setting and stirred periodically.

4. Be sure to use containers that are heatproof.

Note: Tray is not designed to keep large, deep pots full

of food or liquid warm.

CARE AND CLEANING

Do not use any scouring agents or abrasive pads. The best

way to clean the Waring Pro™ Warming Tray is with a mild

detergent and a soft moist cloth.

DO NOT SUBMERGE THE WARING PROTM WARMING

TRAY BASE OR LET THE HEAT CONTROL COME IN

CONTACT WITH WATER.

To polish use a nonabrasive glass cleaner. Any food

residue remaining can be wiped away with a soft sponge.

Rinse and wipe dry.

DO NOT ALLOW WATER TO SPILL OR SEEP INTO FRAME.

5

NOTES

______________________________________________

6

NOTES

______________________________________________

Division of Conair Corporation

150 Milford Road

East Windsor, NJ 08520

www.waringpro.com

Printed in China

08WR111

IB-8434A

Waring WT90B User manual

Popular Food Warmer manuals by other brands