Waring CC150 User manual

CC150
Professional
Cotton Candy maChine
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.

2
TABLE OF CONTENTS
Important Safeguards.................................................................. 2-4
Parts ............................................................................................... 5
Assembly........................................................................................ 6
Operating Instructions .....................................................................7
Making a Paper Cone......................................................................8
Recipes.......................................................................................9-10
Troubleshooting............................................................................ 11
Cleaning and Maintenance ........................................................... 11
IMPORTANT SAFEGUARDS
When using your new cotton candy machine, safety
precautions should always be followed including the
following:
1. Read all instructions before operation.
2. Always unplug from outlet when not in use, and prior to
handling or cleaning.
3. DO NOT TOUCH hot surfaces; use handles or knobs.
4. Avoid contact with moving parts.
5. To avoid electrical hazards, do not expose cord or plug
to water.
6. Stop using the appliance if the cord or plug is
damaged.
7. Keep appliance and cord away from heat.
8. To prevent electrical shock, do not immerse cord, plug
or the motor base in water or other liquids.
9. Close supervision is necessary when any appliance is
used by or near children
10. Do not touch the oss head when it is in operation.
11. Do not use outdoors.

3
12. Always turn the appliance off before assembling
or cleaning.
13. Turn appliance to OFF position before disconnecting
power plug from wall outlet.
14. The motor base must be placed on a level surface to
work efciently.
15. Do not use appliance for other than intended use.
16. Do not operate any appliance with a damaged cord
or plug or after the appliance is malfunctioned or has
been damaged in any manner. Return appliance to
the nearest authorized service facility for examination,
repair, or adjustments.
17. The use of accessory attachments not recommended
by the appliance manufacturer may cause injuries.
18. Do not let cord hang over edge of table or counter, or
touch any hot surfaces.
19. Do not place on or near a hot gas or electric burner, or
in a heated oven.
20. Extreme caution must be used when moving an
appliance.
21. DO NOT leave unit unattended while in use or when
plugged into an outlet.
22. Check inside heating element compartment for foreign
objects before switching to ON position.
23. Heating element in center can get hot. Avoid contact
until cool.
24. Keep hands away from the machine when it is in the
ON position and is spinning.
25. Clean all removable parts with a hot, wet towel before
rst-time use.

4
26. This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to t into a polarized
outlet only one way. If the plug does not t fully into
the outlet, reverse the plug. If it still does not t, contact
a qualied electrician. Do not attempt to modify the
plug in any way.
SPECIAL CORD SET INSTRUCTIONS
A short power-supply cord is provided to reduce the risks
resulting from becoming entangled in or tripping over
a longer cord. Extension cords may be used if care is
exercised in their use.
If an extension cord is used, the marked electrical rating
of the extension cord must be at least as great as the
electrical rating of the appliance, and the longer cord should
be arranged so that it will not drape over the countertop or
table top where it can be pulled on by children or tripped
over. If the appliance is of the grounded type, the extension
cord should be a grounding-type 3-wire cord.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLy

5
A.
B.
D.
C.
E.
F.
G.
G.
PARTS:
A. Splashguard
B. Motor Base
C.Floss Head
D. Measuring Scoop
E. Plastic Cone
F. Bowl
G.Cone Holder

6
ASSEMBLy:
STEP 1
Insert the splashguard onto the bowl (ensure all clips on the
cover are fully inserted into the holes on the bowl).
STEP 2
Insert the bowl and splashguard on the motor base. Make
sure the bowl is pushed all the way down to meet the base,
then turn clockwise to lock the bowl on the motor base.
STEP 3
Insert the oss head on the motor base; ensure the shaft
of the container is locked by the perpendicular shaft on the
motor axis.
IMPORTANT NOTICE
When lifting cotton candy maker from table or counter top,
do not use cone holders located on each side of unit. Cone
holders are for storage only.
To lift safely, place one hand on each underside of the
cotton candy maker and lift upwards to release suction feet.

7
FIGURE 1
OPERATING INSTRUCTIONS
1. Set the motor base on a stable and level surface.
2. Connect plug to a power source.
3. Make sure oss head is in position.
4. Switch on the cotton candy machine to preheat
5 minutes. NOTE: It is very important that you preheat
the cotton candy maker the full 5 minutes.
5. Switch off the cotton candy machine. Add 1 scoop of
sugar mixture into the oss head.
CAUTION: Floss head will be extremely hot. Never
touch oss head while unit is on. After use, allow oss
head to cool for 30 minutes before touching
or removing.
6. Turn unit to ON position.
7. Use plastic cone
to roll the cotton
candy up (see
Fig. 1). Roll from
right to left in a
continuous motion.
Do not touch the
oss head as you
roll, as the head
is very hot and
will cause oss
to burn. Continue
rolling, evenly
distributing the cotton candy onto the cone.
8. Cotton candy may be made in consecutive batches.
If unit is turned off for an extended time, it must be
reheated for 5 minutes.
9. Do not use sugar cubes or liquid sugar when making
cotton candy.

8
Making A Paper Cone
5. Finished paper cone.
1. Place a standard sheet of 8½" x 11"
paper on a flat surface.
2. Lay the plastic cone supplied with
the unit on the 11" side of the paper
and begin rolling the plastic cone
until you reach the other side
of the paper.
3. With the paper totally wrapped
around the plastic cone, take a piece
of tape and tape the loose paper
edge down.
4. With your finger, push the small end
of the plastic cone up until you can
grab the large end of the plastic
cone and pull until it is completely
removed.

9
EASy COTTON CANDy RECIPE
6 scoops pure cane sugar (for a fuller cone of
cotton candy, we recommend using pure organic
cane sugar)
1–2 drops red food coloring
1–2 drops pure vanilla extract
Mix sugar, food coloring and vanilla extract thoroughly
before adding to the oss head. Use one scoop of mixture
per batch.
NOTE: You may substitute the vanilla extract with your
favorite extract avoring.
FLAVORED COTTON CANDy RECIPE
1 scoop of your favorite avor of pre-sweetened
Kool-AidTM drink mix
5 scoops of pure cane sugar (for a fuller cone
of cotton candy, we recommend using pure
organic cane sugar)
Mix sugar and Kool-Aid™drink mix thoroughly before adding
to oss head. Use one scoop of mixture per batch.
Any of the following avors of pre-sweetened Kool-Aid™
can be mixed with pure cane sugar to make cotton candy.
Flavors include: Cherry, Grape and Tropical Punch.

10
HARD CANDy COTTON CANDy RECIPE
Crush up hard candy in a food processor; add to oss head.
Use one scoop of mixture per batch.
Recommended hard candy:
NERDS®
Add one scoop of Nerds®candies to oss head.
FRUIT-FLAVORED LIFE SAVERS®
Add two crushed fruit-avored Life Savers®candies
to oss head.
NOTE: Do not use any hard candy containing dairy
ingredients. Traditional cotton candy oss and paper
cones can also be used with this unit and can be
found online at Amazon.com or try your local party
goods store.