washloo Levitate User manual

Washloo Levitate
Monolith Floor
Standing
Installation
Clean Comfort Hygiene

Table of Contents
1
Page Description Page Number
Safety Precautions 2
Bill of Materials 3
Technical Drawings/Dimensions 5
Levitate Installation 6
Maintenance & Service 16
Flush Adjustment & Cleaning 20
Technical Specifications 22
Warranty 23
User Information 24

2
Safety Precautions
CAUTION
1. Do not connect the mains water to the hot water pipe (only connect to cold water
supply)
2. After the installation, make sure to check all water supply connections for leaks.
Rubber washers should be in place for the water connection hoses and T valves.
3. If the product will not be used for a long period of time, unplug the power cord,
close the main water supply valve and drain any water in the water tank.
4. Do not pull hoses or connection hose using excessive force.
5. Do not use thinners, benzene, acidic chemicals, chloride or hydrochloric acid
detergents. This may result in corrosion to the metallic components and potential
discolouration or scratches to the body of the unit.
6. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge unless
they have been given supervision or introductions concerning the use of the
appliance by a person responsible for their safety. Children should also be
supervised to ensure that they do not play with the appliance.

3
Levitate - Bill of Materials
Note : The above illustration is an example only, your version may vary
Assembled Cistern Glass Front Panel Drainage Pipe Push Button

Note : The above illustration is an example only, your version may vary
4
Levitate - Bill of Materials

Note : The above illustration is an example only, your version may vary
5
Levitate –Technical Drawings/Dimensions

6
Note : The above illustration is an example only, your version may vary
Levitate - Installation

Note : The above illustration is an example only, your version may vary
Levitate - Installation
7
Put a spirit level above the cabinet and check if
cabinet is placed level horizontally. If not,
adjust the floor fixation screws to achieve a
level position.
Spirit
Level

8
Note : The above illustration is an example only, your version may vary
Levitate - Installation

Note : The above illustration is an example only, your version may vary
Levitate - Installation
9
Install the outer decoration cover –Lift it up
first, align the guide rail and threaded hole,
then push in.

10
Note : The above illustration is an example only, your version may vary
Levitate - Installation
Press the buttons on the armrest and check if
the raising & lowering of the cabinet is smooth.
Finally, put the cabinet to it’s lowest position.

Note : The above illustration is an example only, your version may vary
Levitate - Installation
11

12
Note : The above illustration is an example only, your version may vary
Levitate - Installation

Note : The above illustration is an example only, your version may vary
Levitate - Installation
13
Use a file to chamfer the edge of the flush pipe
and waste pipe Apply a lubricant

Note : The above illustration is an example only, your version may vary
Levitate - Installation
14

Note : The above illustration is an example only, your version may vary
Levitate - Installation
15

16
Note : The above illustration is an example only, your version may vary
Levitate –Maintenance and Service

Note : The above illustration is an example only, your version may vary
Levitate –Maintenance and Service
17

18
Note : The above illustration is an example only, your version may vary
Levitate –Maintenance and Service