Waspper PEGGAS User manual

1
SURFACE CLEANER
Operation manual
EN
Contents of carton box:
1 x Surface cleaner
1 x Instruction Leaflet
*The picture serves for reference only and it may not represent an exact match of the
device delivered

2
INTENDED USE:
This surface cleaner is designed to clean large areas such as paths,
driveways, decks and other large surfaces. The two rotating nozzles
ensure an efficient, yet even clean.
The surface cleaner must only be used with a pressure washer and is
compatible with the 3300 PSI pressure washers. It is also compatible
with most pressure washers that have a ¼“ quick connect coupler and
a maximum pressure of less than 3300 PSI. It is designed to be
powered by the trigger assembly of your pressure washer.
The surface cleaner is intended for private use only. It must only be
used for its prescribed purpose. Any use other than those mentioned
in this instruction leaflet will be considered a case of misuse. Please
read and familiarise yourself with this instruction leaflet before using
this product.
The manufacturer shall not be liable for any unauthorised
modifications made to the surface cleaner, nor for any damage
resulting from such changes.
DESCRIPTION OF SYMBOLS:
The following symbols represent important about the product and
instructions on its use.
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Wear hearing protection. Wear eye protection. Wear breathing
protection.
Read and understand instruction leaflet before using this
product.
Do not direct the jet at any person, domestic animal, live
electrical equipment or the pressure cleaner unit itself.

3
SCOPE OF PRODUCT:
IMPORTANT SAFETY WARNINGS:
WARNING! For your own safety, and for the safety of others, please
read the operating instructions carefully before using this patio cleaner
for the first time.
Keep the manual in a safe place and pass it on to any susequent
owner o ensure that the information contained there in is available at
all times.
CAUTION! Pressure washers can be dangerous if they are not
operated correctly! The jet must never be directed at people, animals,
electric equipment connected to the power supply, or against the
actual petrol pressure washer. Read the manufacturer’s instruction
manual for the petrol pressure washer before using the appliance.
WARNING! Never reach under the surface cleaner when it is being
operated.
Do not direct the jet nozzle at yourself or others in order to
clean clothes and shoes.
Do not operate the petrol pressure washer when other people
are in the immediate vicinity.
Ensure any operators of the pressure washer and anyone else
in the immediate vicinity are wearing appropriate protective
clothing.
Do not start the pressure washer until the patio cleanerrests
on the surface you are cleaning.

4
Do not let the surface cleaner reamain stationary on soft
surfaces, such as wood.
Striking any raised obstacleduring operation will damage the
machine. If conatct does occur and results in vibration when
operating machine, stop and replace spray bar. Continued
operation could result in serious injury or damage to machine.
This appliance is not intended for use by persons (including
childrens) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instrucions concerning the use
of the appliance by a person responsible for their safety.
People who are unfamiliar with the operating instructions are
not permitted to use the equipment. The operation of the
equipment is not authorised for people under the age of 18
years.
Take appropriate measures to keep children away from the
equipment in the vicinity of flammable liquids or gases. Non-
observance will result in a risk of fire or explosion.
Always test a small area to see if the surface can withstand
the high pressure.
Store the equipment in a dry place and out of reach of
children.
Children must be supervised in order to ensure that they do
not play with the equipment.
CAUTION! To avoid damage to the equipment and any possible injury
to persons or animals resulting from this.
Do not work with damaged or incomplete equipment, or with
equipment that has been modified without the approval of the
manufacturer.
Drain water in cold weather to avoid freezing. Protect surface
cleaner from frost.
Do not modify the surface cleaner.
Never lock trigger gun open with any device.
Keep clear of rotating nozzles.

5
ASSEMBLY
WARNING!
Make sure that
the pressure
washer (not
supplied) is
not in
operation
during
assembly.
Connect the
surface
cleaner’s 1/4”
quick connect
adapter into
the couper of
your petrol pressure washer’s lance (not supplied).
OPERATION:
WARNING! Take heed of the backstroke generaed by the jet of the
water. Stand firmly and hold the pressure washer’s trigger assembly
gun tightly. You may otherwise injure yourself or other bystanders.
This accessory is designed to be powered by the trigger
assembly of your pressure washer.
Do not release water from the pressurewasher until the
surface cleaner on the surface you are cleaning.
The surface cleaner is not designed for scouring or scrubbing.
Avoid using the surface cleaner over balcony edges or
staircase edges. Ensure the entire cleaning surface of the
surface cleaner sits on a flat work surface when in use.
The internal jet mecahnism must not touch the work surface
area.
TECHNICAL SPECIFICATIONS:
Maximum Input Water Pressure
Diameter
Connection
Nozzles

6
DISPOSAL INSTRUCTIONS:
Tools that are no longer usable should not be disposed of with
household waste but in an environmentally friendly way. Please
recycle where facilities exist in your area. Check with your local council
authority for recycling advice.
Recycling packaging reduces the need for lnadfill and raw materials.
Reuse of recycled material dereases pollution in the environment.
Please recycle packaging where facilities exist.Check with your local
council authority for recycling advice.
CLEANING, MAINTENANCE & STORAGE:
WARNING! Make sure that no part of the surface cleaner is connected
to the pressure washer (not supplied) during cleaning or maintenance
procedures.
Alway keep the surface cleaner clean and free from debris. Do nout
use any detergents or solvents. Clean the surface cleaner with a soft
brush or a slightly moist cloth.
Store the surface cleaner in a dry, frost-free room.
Warranty Certificate:
Product
type:
Stamp and
signature:
Serial
number:
Date of purchase:
Device type
Surface cleaner
Max. pressure
3300 PSI
Maximum speed
1700 rpm
Connection
¼“ Quick connect
Length
41 cm
Height
13 cm
Width
42 cm
Weight
1,18 Kg

7
In pursuit of service enhancement and simplification of communication
with customers, the company WPW Center s.r.o. recommends its
customers, who purchase this product, to register their product via the
manufacturer's website: www.waspper.com. This registration will
provide inevitable data for faster processing of your complaints or
consulting relevant to purchasing of spare parts and accessories. This
registration enables the customer to avoid further procedures, as
submitting of the purchase receipt or the warranty certificate.
1. The manufacturer - waspper s.r.o. - is liable for inherent defects of
the product purchased, if such defects become evident within the
warranty period. Application of claims for repairs under warranty
requires completion and submission of the complaint form via the
manufacturer's website: www.waspper.com. The product is covered by
a full warranty of 24 months for private customers (as defined by the
Civil Code) and 12 months for corporate customers (as defined by the
Commercial Code). The warranty period commences upon completion
and submission of the complaint report via the website in case of simple
defects and damages. The commencement of warranty in case of major
defects starts upon the product delivery to the manufacturer's address:
Waspper s.r.o, Radlinského 20, 05201 Spišská Nová Ves. Acceptance
of complaint will be notified to the customer using the contact details
entered in the complaint form.
2. The warranty does not cover defects incurred due to: wrong
operation; improper handling or use contradictory to the operation
manual or instructions and recommendations from the company
Waspper s.r.o; use or storage of goods within inappropriate areas,
especially with respect to temperature, dust formation or ambient
humidity; exposure to direct sunlight; damage attributable to natural
disasters of force majeure. The warranty does not apply to mechanical
damages, any damages due of solid particles, frost or other weather
effects. The warranty does not apply to damage to the pump caused by
cavitation. Other exemptions from warranty include damages to the
engine due to lack of oil and ingress of any other but operating fluid
among internal engine components.
3. Particular steps of claims processing will be notified to the customer
following assessment of the scope of repair by the claims engineer.
Whenever the replacement of a damaged component can be performed

8
by the customer, the latter will receive a relevant spare part only. If the
repair by a servicing centre is inevitable, the customer is obliged to mail
the damaged device to the manufacturer's address. The device must be
complete (including accessories) and packed properly to prevent its
damage during transport, it must be free of mechanical damage and
contain no operating fluids. If the goods submitted to the servicing centre
shows evident signs of damage or excessive wear, the manufacturer
reserves the right to reject such consignment without acceptance.
4. Claims for repairs under warranty oblige the customer to provide the
receipt of purchase (invoice, cash receipt) together with the warranty
certificate and written description in support of their claim, including
photographic documentation. It is recommended to complete the
complaint form via the manufacturer's website to ensure the fastest
processing of the claim as possible, if the manufacturer acknowledges
such claim as justified, the repaired item will be sent to the customer
and the postage/freight will be covered by the manufacturer.
5. If the claims engineer finds out the product does not comply
qualifications for repair under warranty, the claim will be considered
unjustified and the costs of product transport to the customer will be paid
by the latter.
6. Should the repair period exceed 30 days or if the product is
irreparable, the customer will be offered a replacement item.
7. Justification of claims will be assessed by the claims engineer at the
manufacturer. Justified claims will extend the warranty period by the
period taken by the claim processing period. Such action will be
confirmed to the customer by means of a document in writing,
dispatched together with the product or sent via e-mail. If the product
subject to claim contains any discontinued component, the
manufacturer will provide the customer with an adequate replacement
item with its parameters corresponding with the returned product or
even better.
8. The customer undertakes to read all the information found on the
packaging or in the operation manual; to do so immediately following
the product delivery, to acknowledge that preservation of the positive
characteristics of the product delivered will be subject to its proper

9
operation and storage. Any disregard to obligations defined herein
relieve the company WPW Center s.r.o. from any liability for defects of
goods or damages incurred due to breach of this obligation by the
customer or any other third party. The customer is obliged to check the
intact condition of packaging and product during the purchase and
takeover of the consignment from the postman. Any damage to the
packaging must be reported to the carrier and recorded immediately.
Any damages found only after unpacking of the product must be notified
to the distributor within the maximum period of 4 working days. No later
claims for product damage can be accepted.
The warranty conditions of our distribution organisation apply in every
country. Potential failures of your devices will be removed free of charge
within the warranty period, if due to defects of material or workmanship.
To claim the warranty, please submit the sales receipt for your device at
your distributor or the closest authorised servicing workshop. For the list
of approved servicing centres, see our website at: www.waspper.com
The efforts made by Waspper s.r.o. are aimed at sustainable
development of technical parameters and user-friendly parameters of its
products. For this reason, the manufacturer reserves the right to alter
the design and control features without any prior notification to the end
customers. The position of all control and safety features illustrated in
this manual corresponds with their actual positioning. This manual does
not have to reflect any changes in design of control levers.
Waspper s.r.o.
Duklianska 51
052 01 Spišská
Nová Ves
Slovakia