Watchguard Firebox V60 Installation and operating instructions

Firebox®V60L
Addendum
Thank you for purchasing the WatchGuard Firebox V60L. The Firebox V60L provides many of the same
hardware and software features as the rest of the Vclass family. When you are reading your WatchGuard
documentation, it is useful to think of the Firebox V60L as the Firebox V60 with a slightly different set
of features. This document describes the differences between the Firebox V60L and the Firebox V60.
The following table shows the differences in capabilities between the WatchGuard
Firebox V60L and the WatchGuard Firebox V60.
Other Tunnel Limitations
The V60L and the V60 include 20 free MUVPN (RAS User) licenses by default. The total MUVPN
(RAS User) limit on the V60L is 100.
1V60L and V60 Capabilities
Feature Firebox V60L Firebox V60
Firewall packet filtering throughput 100 200
VPN (3DES) throughput 50 100
Branch Office VPN tunnels 50 400
Mobile User VPN tunnels 100 (20 licenses included) 400 (20 licenses included)
Total Tunnels (Branch Office +
Mobile User)
150 400
Concurrent Sessions 16K 16K
Firewall User Licenses 250 Unlimited
High Availability Active/Standby Optional Yes (requires LiveSecurity
Registration)
Interfaces 4 10/100 4 10/100

The V60L hardware has the same hardware features and ports as the V60. For a description of the hard-
ware features, see your
Firebox V10, V60, V80, V100 Hardware Guide .
Using the HA Ports
The High Availability (HA) feature is not enabled on the V60L. The HA ports on the V60L do not provide
HA/Active Standby (HA/AS) functionality in the default configuration. However, you can use the HA
ports as direct console connections for administration of the V60L.
High Availability Active/Standby is available as an optional upgrade.
The V60L can be configured using Vcontroller, CPM, or the Command Line Interface.
2V60L Hardware Features
3V60L Software Features