Waterpik Waterflosser WP-950 Series User manual

This device is only compatible with voltages of 100-240VAC, 50/60Hz ©2019 Water Pik, Inc.
First Use
1
WP-950 Series
QUICK START GUIDE
Fill reservoir with warm
water and replace it
firmly on the base.
2
4
8
6
10
ON
OFF
Turn pressure to high, point tip into
sink, turn power and water switches
ON until water flows. Turn OFF.
Insert tip firmly
until it clicks
into place.
Water ON
Fill
8
6
Power
ON
High

TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
FN 20026583-F AA
Water Floss
2
WP-950 Series
QUICK START GUIDE
Close lips enough to prevent
splashing, while still allowing
water to flow from mouth into
sink. Start on low pressure and
increase to your liking.
Aim water at the gumline at a 90
degree angle. Follow the gumline
and pause briefly between teeth.
2
4
8
6
10
ON
OFF
With power and water switch
in OFF position, place tip in
mouth. Turn power ON. Turn
water switch ON.