Waterpik WP-800 Series User manual

This device is only compatible with voltages of 100-240VAC, 50/60Hz ©2019 Water Pik, Inc.
First Use
1
WP-800 Series
QUICK START GUIDE
Fill reservoir with
warm water and
replace it firmly
on the base.
Turn pressure to HIGH, point tip
into sink, turn power and water
switches ON until water flows.
Turn OFF.
Insert tip firmly
until it clicks
into place.
Fill
8
6
8
6
2
4
6
8
10
High
Power
ON

TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
FN 20026582-F AB
Water Floss
2
WP-800 Series
QUICK START GUIDE
Lean over sink. Close lips
enough to prevent splashing,
while still allowing water to
flow from mouth into sink.
Increase pressure to
your liking.
Aim water at the gumline
at a 90 degree angle. Follow
the gumline and pause
briefly between teeth.
2
4
6
8
10
Turn pressure to low. With
water switch in OFF position,
place tip in mouth. Turn Power
ON. Turn water switch ON.