Waterpik WATERFLOSSER WP-450 User manual

QUICK START GUIDE
1
3 4
OFF
Plug
in
Insert
2
Remove
Plug
Turn power
switch OFF, plug
power cord into
outlet, and insert
the charging cord
into the unit.
Lift the flip top on
reservoir and fill
with lukewarm
water. Refill as
needed.
Unplug
charging
cord from
unit prior to
filling with
water and
during use.
Select the appropriate
tip and insert into the unit.
Press firmly until the tip
clicks into place. To remove
tip, push the tip eject
button.
Caution: Do not
press tip eject button
while unit is running.
continued on back
To increase water
pressure move to
HI setting.
For first time use,
adjust the pressure
setting to the LOW
setting
Q
UI
C
G
UIDE
2
C
K
S
T
A
T
T
R
T
G
2
Model WP-450
LOW
Pressure
Setting
Charge Unit for 24 Hours
Prior to First Use. Insert Tip:
Fill the Reservoir: Usage:

5
6
Always turn unit OFF
before removing tip
from mouth.
OFF
20013669-F AA
Keep unit
upright during
use to ensure
continuous
water flow.
Lean over sink and
close lips enough to
prevent splashing,
while still allowing
water to flow from
mouth into the sink.
Turn unit ON.
Aim the water stream just above the
gumline at a 90 degree angle.
Always place tip
in mouth before
turning unit on.
Starting with the back teeth, follow the
gumline and pause briefly between teeth.
Continue until all areas around and
between teeth have been cleaned.
On/Off Procedure:
Technique Tips for Best Results:
www.waterpik.com
©2010 Water Pik, Inc.