Waterworks SB-100HD User manual
clean with the
power of nature
USER MANUAL
Model: SB-100HD
ENHANCED OXYGEN SPRAY BOTTLE
Important information can be found here.
NOTICE indicates a situation which, if not avoided, may result
in damage to the appliance.
CAUTION
NOTICE
IMPORTANT!
CONTENTS
1Safety ............................................................................................... 3
1.1 Symbols from the User Manual ...................................... 3
1.2 Proper Use.............................................................................. 3
1.3 Caution .................................................................................... 3
1.4 Important Instructions....................................................... 3
2Technical Data ..............................................................................4
3Safety ............................................................................................... 5
3.1 Description............................................................................. 5
3.2 Key Components ................................................................. 5
3.3 Operating Instructions....................................................... 6
4Preventative Maintenance / Cleaning ................................ 8
5Troubleshooting........................................................................... 8
5.1 Indicator Lights on Top of Bottle .................................. 8
5.2 Battery Replacement ......................................................... 8
6Decommissioning........................................................................ 9
6.1 Storage .................................................................................... 9
6.2 Disposal................................................................................... 9
7Service ........................................................................................... 10
7.1 Service and Warranty ...................................................... 10
7.2 Service Network – U.S. & Canada................................ 10
SAFETY
1.1 SYMBOLS FROM THE USER MANUAL
1.2 PROPER USE
Before initial use, the instructions on operating safety, use and maintenance
must be read carefully and understood. Keep the user manual in the vicinity of
the appliance for later reference.
CAUTION indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
The O3waterworks Enhanced Oxygen Spray Bottle is intended for residential
use. It is designed for safe operation when used as directed. The following
general safety precautions provide guidance for safe use. Failure to comply with
the safety precautions or warnings indicated in this manual violates the safety
standards of this equipment. The manufacturer and distributer assumes no
liability for the user’s failure to comply with these requirements.
• Read manual before use.
• It may only be used for its intended purpose.
• Product is intended for residential use.
• Do not remove warning labels from unit.
• Fill with clean, potable water only.
• Do not immerse unit in water. Clean exterior of unit with soft cloth.
Do not use harsh or abrasive cleaners.
• Do not add any cleaning chemicals into the water reservoir.
1.3 CAUTION
Do not spray toward eyes. In case of eye exposure rinse aected eye(s)
thoroughly with clean water for 5 to 10 minutes. If irritation persists, seek
medical attention.
• Use only properly ventilated area in conformance
to all local and national regulations.
• If overly strong odor of ozone is detected discontinue use.
• If respiratory irritation is experienced discontinue use immediately.
• Do not expose plastic sprayer to extreme heat or open flame.
• Keep out of the reach of children.
• Do not drop sprayer.
2 3
1.4 IMPORTANT INSTRUCTIONS
To avoid appliance damage:
Do not drop the bottle.
– Dropping the bottle may cause breakage.
Fill with clean potable water only.
– Filling the bottle with fluids other than clean potable water
may damabe cartridge and render the product useless.
Do not overfill the bottle.
– Overfilling may cause leakage at the fill plug.
Do not run water into the charger port.
– Doing so may short the battery/electronics.
NOTICE
SAFETY
(cont’d)
4
SPECIFICATIONS
Materials
Weight
(empty)
Dimensions
(in mm)
Reservoir
Capacity
Water
Temperature
Water
Quality
Ambient
Air
Rechargable
Battery
Useful
Battery
Life
Model #
Certifications
EPA
Establishment
Number
PC/ABS Impact Resistant Plastic
~ 2 lb (0.9 kg)
4 in x 4 in x 10 in
(100 mm x 100 mm x 250 mm)
14 oz (400 ml)
40°F to 86°F (4°C to 30°C)
Hardness ≤250 ppm CACO3
(May Extend Life of Unit)
Conductivity >50 μS/cm
(Cell damage may result from
use of distilled or deionized water)
40°F to 104°F (4°C to 40°C)
7.4 V Li-lon
(Charger uses 100 V AC to
240 V AC, 50/60 Hz)
5000 Reservoir Fills
or 500 Charges (Typical)
SB-100
CE, TUV, RoHS, WEEE
089373-MA-001
TECHNICAL DATA
5
DESCRIPTION
After Charging, it is important to securely
push protective flap back in place.
Charge plug location
3.1 DESCRIPTION
The O3waterworks Enhanced Oxygen Spray Bottle oers a water-based
alternative to tradtional cleaners and sanitizers. It turns potable water into
aqueous ozone, a sanitizer that kills many common pathogens found on hard,
non-porous surfaces and destroys organic odors.
The tiny electrolytic cell is created from a proprietary diamond process
technology and generates ozone on-demand from water itself. Water exists in
the reservoir and the ozone is activated on-demand, creating the sanitizer. This
eliminates the need for many household chemicals and the constant need to
repurchase supplies. Furthermore, it leaves no residue.
1. Indicator LEDs
2. Charging Port
3. Spray Nozzle
4. Diamond Cell
5. Spray Trigger
6. Fill Plug
7. Water Reservoir
8. Battery & Control
Electronics
3.2 KEY COMPONENTS
NOTE: Product may vary from illustrations
Water Based Sanitizer
• Proven sanitizer
• Reduces common pathogens
• Destroys odor-causing microorganisms
• Ensures ecacy and compliance with EPA requirements
Dependable, On-Demand Solution
• Ozone (O3) is activated as-needed
• Runs on long lasting rechargeable batteries
• Requires only clean, potable water
• User-friendly lights indicate when sanitizer is active
Alternative
• Leaves behind no residues
• Compatible with all surfaces where water may be used
• Eliminates potential errors with mixing or diluting
• Ingredients by weight:
– 99.9998% Water – 0.0002% Ozone – No fragrance added
IMPORTANT: Please read these instructions completely before use.
Use this product to sanitize hard, non-porous, non-food contact surfaces.
• Tables and countertops • Doors and handles
• Kitchen surfaces • Pet accident odors
• Bathroom surfaces • Windows
Product should only be used on surfaces that have been identified to be
at risk for disease transmission or where required by regulation.
Charge the Unit
Before using the sprayer for the first time,
charge the batteries. The first charge may
take up to 8 hours. The red light on the
charger indicates that the device is being
charged. The charge is complete when the
light on the charger is green.
NOTE: The spray bottle will not operate
while connected to the battery charger.
Connect the battery charger to a 100-240
V AC 50/60 Hz power source. Connect the
battery charger power cord to the spray
bottle. The system is powered by a 7.4 V
Lilon rechargeable battery pack. A 100 to
240 V AC 50/60 Hz charger is included.
User only the charger provided.
3.3 OPERATING INSTRUCTIONS
6 7
1
2
6
3
7
8
4
5
While spraying, blue light indicates
unit is working properly.
Hold 6-8” away from surface.
Sit bottle on counter and check
water level with fill line.
Secure fill plug.
Fill approximately half full in horizontal position.
Fill the Reservoir
Remove the fill cap to fill the reservoir with
10 oz of clean, cold potable water. While
holding the unit in the horizontal position, fill
reservoir about half full. Securely replace the
fill plug. Turn bottle in vertical position and
check fill line. Repeat until water reaches fill
line. Do not overfill. Do not fill with hot water.
Prime the Spray Bottle
When new, or after long storage, the ozone
generator in the head of the bottle may
become de-primed. When the ozone cell is
dry, the blue light will not illuminate while
spraying. A primed spray bottle should
spray uninterrupted for at least 30 seconds
with the blue light illuminated.
To prime the spray bottle, continue to
spray with the blue light o until the blue
light turns on. If the blue light does not
illuminate after 2 minutes of spraying, the
bottle may need to be primed using salt.
Additionally, if the bottle starts spraying
with the blue light illuminated and then
stops spraying with the blue and red lights
then flashing twice, your bottle may need
to be primed using salt.
To prime the spray bottle with salt:
1. Fill the spray bottle with water
2. Add 1 tsp of regular table salt
3. Spray the full tank into the sink
4. Fill the spray bottle with fresh tap water
5. Your bottle is now ready to use
Please note: the ozone cell may need to be
re-primed with 1 tsp of salt if unit is unused
for 3 or more months.
CAUTION
FILL WITH CLEAN, COLD POTABLE WATER ONLY.
DO NOT OVERFILL THE BOTTLE. DO NOT RUN
WATER INTO THE CHARGER PORT. WATER
TEMPERATURE 40°F to 86°F (4°C to 30°C)
8
Remove cap.
PREVENTATIVE MAINTENANCE & CLEANING
1. Charge unit nightly to ensure full capacity the next day.
2. Clean bottle with moistened cloth only.
Do not use chemicals or cleaners.
TROUBLESHOOTING
5.1 INDICATOR LIGHTS ON TOP OF BOTTLE
LIGHTED INDICATORS SYSTEM MESSAGE
SOLID BLUE
ONE RED FLASH
TWO RED FLASHES
THREE RED FLASHES
TWO RED & BLUE FLASHES
ALL OTHER PROBLEMS
System is operating properly
Battery is low
Reservoir is empty
Battery needs recharging
System fault; recharge and try again.
If error persists, contact service department.
Contact service department.
5.2 BATTERY REPLACEMENT
The battery can be replaced. Detailed instructions are included with the
replacement battery kit. A replacement battery can be ordered through your
dealer where you purchased this product, or through the Service Department
as listed in Section 7 of this manual.
9
Sanitize Hard Non-Porous Surface
Hold the spray bottle 6 to 8 inches from the surface and spray evenly until
wet. For 99.9% eectiveness against common pathogens allow to stand
for 30 seconds. Wipe with a clean cotton or microfiber cloth or allow to
air dry. No rinsing is necessary (leaves no residue). Ozone is generated on
demand. While spraying, the blue indicator will light when the unit is
operating properly.
Table of contents
