manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Weider
  6. •
  7. Home Gym
  8. •
  9. Weider Pro 9635 User manual

Weider Pro 9635 User manual

Other manuals for Pro 9635

2

This manual suits for next models

2

Other Weider Home Gym manuals

Weider Black 150 Xwb Bench User manual

Weider

Weider Black 150 Xwb Bench User manual

Weider WEBE0635.1 User manual

Weider

Weider WEBE0635.1 User manual

Weider Pro 202 831.150260 User manual

Weider

Weider Pro 202 831.150260 User manual

Weider 400 Bench User manual

Weider

Weider 400 Bench User manual

Weider 9000 Bench User guide

Weider

Weider 9000 Bench User guide

Weider 195 Tc Bench System manual

Weider

Weider 195 Tc Bench System manual

Weider FLEX-CTS WESY20318.0 User manual

Weider

Weider FLEX-CTS WESY20318.0 User manual

Weider WEBE0635.0 User manual

Weider

Weider WEBE0635.0 User manual

Weider E9005 User manual

Weider

Weider E9005 User manual

Weider B160 Bench User manual

Weider

Weider B160 Bench User manual

Weider WESY85310 User manual

Weider

Weider WESY85310 User manual

Weider Pro 4950 831.14623.0 User manual

Weider

Weider Pro 4950 831.14623.0 User manual

Weider WESY96310 User manual

Weider

Weider WESY96310 User manual

Weider 831.150850 User manual

Weider

Weider 831.150850 User manual

Weider Body Blaster Force 4 User manual

Weider

Weider Body Blaster Force 4 User manual

Weider WEBE13011 User manual

Weider

Weider WEBE13011 User manual

Weider PRO 800 User manual

Weider

Weider PRO 800 User manual

Weider D470S 354.156220 User manual

Weider

Weider D470S 354.156220 User manual

Weider Muscle 1352 Bench User manual

Weider

Weider Muscle 1352 Bench User manual

Weider WESY38320 User manual

Weider

Weider WESY38320 User manual

Weider Pro Xt55 User manual

Weider

Weider Pro Xt55 User manual

Weider WESY5993.3 User manual

Weider

Weider WESY5993.3 User manual

Weider WESY8510C4 User manual

Weider

Weider WESY8510C4 User manual

Weider Wb-450 Bench User manual

Weider

Weider Wb-450 Bench User manual

Popular Home Gym manuals by other brands

T.D.S. 3501 Assembly instructions

T.D.S.

T.D.S. 3501 Assembly instructions

Body Solid EXM1950 Assembly instructions

Body Solid

Body Solid EXM1950 Assembly instructions

Horizon Fitness OXFORD 6 manual

Horizon Fitness

Horizon Fitness OXFORD 6 manual

Energetics Multi Trainer 5.1 owner's manual

Energetics

Energetics Multi Trainer 5.1 owner's manual

Precor Discovery Series owner's manual

Precor

Precor Discovery Series owner's manual

Matrix MG-PL Series Service manual

Matrix

Matrix MG-PL Series Service manual

Reebok Tbr2i Manuale d'istruzioni

Reebok

Reebok Tbr2i Manuale d'istruzioni

Pure Fitness 8526HE owner's manual

Pure Fitness

Pure Fitness 8526HE owner's manual

Bowflex Sport 001-6961 Assembly instructions

Bowflex

Bowflex Sport 001-6961 Assembly instructions

NordicTrack E8200 Competition Bench Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Bedienungsanleitung

Insportline RW600 user manual

Insportline

Insportline RW600 user manual

Body Solid GHYP-345 owner's manual

Body Solid

Body Solid GHYP-345 owner's manual

Evo TAHOE 5105 user manual

Evo

Evo TAHOE 5105 user manual

ParaBody 40 Assembly instructions

ParaBody

ParaBody 40 Assembly instructions

JLL Ventus Pro Air Power instruction manual

JLL

JLL Ventus Pro Air Power instruction manual

Trojan Colorado 370 user manual

Trojan

Trojan Colorado 370 user manual

Tunturi R25 owner's manual

Tunturi

Tunturi R25 owner's manual

Deltech Fitness DF102 Assembly instructions

Deltech Fitness

Deltech Fitness DF102 Assembly instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

CAUTIO
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model o. 831.15928.0
Serial o.
Write the serial number in the
space above for future reference.
• Assembly
• Operation
• Maintenance
• Part List and Drawing
Serial Number Decal
(under the seat)
Sears, Roebuck and Co.
Hoffman Estates, IL 60179
WEIGHT BE CH EXERCISER
Userʼs Manual
2
WARNINGDECALPLACE ENT ..............................................................2
I PORTANTPRECAUTIONS ................................................................3
BEFOREYOUBEGIN ......................................................................4
PARTIDENTIFICATIONCHART ..............................................................5
ASSE BLY ..............................................................................6
ADJUST ENT ...........................................................................13
EXERCISEGUIDELINES ..................................................................15
PARTLIST ..............................................................................17
EXPLODEDDRAWING ....................................................................18
ORDERINGREPLACE ENTPARTS ..................................................BackCover
90DAYFULLWARRANTY ..........................................................BackCover
TABLE OF CO TE TS
WAR I G DECAL PLACEME T
This drawing shows the location(s) of the warning decal(s).
If a decal is missing or illegible, call 1-877-992-5999
and request a free replacement decal. Apply the decal
in the location shown. Note: The decal(s) may not be
shown at actual size.
3
IMPORTA T PRECAUTIO S
WAR I G: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the weight bench before using the weight bench.
Sears assumes no responsibility for personal injury or property damage sustained by or through
the use of the weight bench.
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over age 35 or persons with
pre-existing health problems.
2. Use the weight bench only as described in
this manual.
3. It is the responsibility of the owner to
ensure that all users of the weight bench
are adequately informed of all precautions.
4. The weight bench is intended for home use
only. Do not use the weight bench in a
commercial, rental, or institutional setting.
5.
Keep the weight
bench
indoors, away from
moisture and dust. Place the weight
bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench
to mount, dismount, and use it.
6.
Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
7.
The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg)
and a maximum total weight of 610 lbs (277
kg). Do not place more than 310 lbs (141 kg),
including a barbell, on the weight rests. Do
not place more than 150 lbs (68 kg) on the leg
lever. ote: The weight bench does not
include a barbell or weights.
8. Always keep children under age 12 and
pets away from the weight bench.
9.
Wear appropriate clothes while exercising; do
not wear loose clothes that could become
caught on the weight bench. Wear athletic
shoes for foot protection while exercising.
10. Always keep hands and feet away from mov-
ing parts.
11.
Before you use the weight bench, make sure
that the backrest brace is fully inserted into a
slot in the frame.
12.
Before you use the weight rests and the spot-
ters, make sure that the large pins are fully
inserted through the weight rests or the spot-
ters and through the uprights.
13. Do not use a barbell that is longer than 6 ft.
(1.8 m) with the weight bench.
14. Always exercise with a partner. When you
perform the bench press exercise, your part-
ner should stand behind you to catch the bar-
bell if you cannot complete a repetition.
15. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
4
Seat
Curl Post Knob
Curl Pad
Leg Lever
Weight Rest
Spotter
Curl Arm
Weight Tube
Weight Clip
Backrest
Long Pin
Upright
Backrest Brace
BEFORE YOU BEGI
Thank you for selecting the versatile WEIDER PRO™
390 L Olympic weight bench. The 390 L Olympic
weight bench offers a selection of exercise stations
designed to develop the major muscle groups of the
body. Whether your goal is to tone your body, build
dramatic muscle size and strength, or improve your
cardiovascular system, the weight bench will help you
to achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the back cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.
ASSE BLED DI ENSIONS:
Height: 4 ft. 11 in. (150 cm)
Width: 3 ft. 11 in. (120 cm)
Depth: 6 ft. 10 in. (209 cm)
5
M6 Washer (42)
M10 x 180mm Bolt (54)
M10 Washer (35)
M8 Washer (36)
M10 Curved Washer (58)
M10 x 18mm
Screw (34)
M10 x 82mm Carriage Bolt (55)
M10 x 85mm Bolt (45)
M10 x 101mm Bolt (38)
M10 x 192mm Bolt (43)
M10 x 110mm Bolt (44)
ST4.2 x 10mm
Screw (17)
ST4.2 x 20mm
Screw (53)
M10 x 58mm Carriage Bolt (40)
M8 x 65mm Screw (56)
M10 Locknut (37)
M6 x 25mm
Screw (39)
M6 x 48mm Screw (41)
PART IDE TIFICATIO CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. IMPORTA T: If you cannot
find a part in the hardware kit, check to see if it has been preassembled. If a part is missing, please call
1-877-992-5999. To avoid damaging parts, do not use power tools for assembly.
6
ASSEMBLY
1.
Orient the Front Stabilizer (2) so that the square
holes are facing the floor.
Attach the Front Leg (4) to the Front Stabilizer
(2) with two 10 x 82mm Carriage Bolts (55)
and two 10 Locknuts (37). Do not tighten the
Locknuts yet.
Then, tighten an 8 x 65mm Screw (56) with
an 8 Washer (36) into the Front Stabilizer (2)
and the Front Leg (4).
2
37
56
36
4
1
55
Square
Holes
To make assembly easier, read the tips at
the top of this page before your begin.
•Assembly requires two persons.
• Because of its size and weight, assemble the
weight bench in the location where it will be
used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until you complete all
assembly steps.
• To identify small parts, see page 5.
•The following tools (not included) may be
required for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
7
2. Attach the Front Leg (4) to the Frame (1) with
two 10 x 101mm Bolts (38), two 10 Curved
Washers (58), and two 10 Locknuts (37). Do
not tighten the Locknuts yet.
Then, attach the Leg Lever Bumper (49) to the
Front Leg (4) with an ST4.2 x 20mm Screw (53).
4. Orient the Seat (18) as shown.
Attach the Seat (18) to the Frame (1) with four
6 x 25mm Screws (39).
2
4
1
37
37
58
38
53 49
3
3. Orient the Rear Stabilizer (3) so that the warn-
ing decals are facing upward.
Attach the Rear Stabilizer (3) to the Frame (1)
with two 10 x 58mm Carriage Bolts (40) and
two 10 Locknuts (37).
See step 1. Tighten the M10 Locknuts (37)
and the M8 x 65mm Screw (56).
See step 2. Tighten the M10 Locknuts (37).
4
1
18
39
1
3
Warning
Decals
37
40
8
5. Orient the Backrest Frames (16) so that the
welded tubes are in the positions shown.
Apply a small amount of the included grease to
an 10 x 180mm Bolt (54). Attach the Backrest
Brace (15) to the Backrest Frames (16) with the
Bolt, two 10 Washers (35), and an 10
Locknut (37). Do not tighten the Locknut yet.
Orient the Backrest (19) as shown.
Attach the Backrest (19) to the Backrest
Frames (16) with four 6 x 48mm Screws (41)
and four 6 Washers (42). Do not tighten the
Screws yet.
6. Apply a small amount of grease to an 10 x
192mm Bolt (43). Attach the Backrest Frames
(16) to the Frame (1) with the Bolt, two 10
Washers (35), and an 10 Locknut (37). Do
not overtighten the Locknut; the Backrest
Frames should pivot easily.
Insert the end of the Backrest Brace (15) into
one of the slots in the Frame (1).
See step 5. Tighten the four M6 x 48mm
Screws (41) and the M10 Locknut (37). Do
not overtighten the Locknut; the Backrest
Brace (15) should pivot easily.
7. Apply a small amount of grease to an 10 x
85mm Bolt (45). Attach the Leg Lever (5) to the
Front Leg (4) with the Bolt and an 10 Locknut
(37). Do not overtighten the Locknut; the
Leg Lever should pivot easily.
Attach the Curl Arm Bumper (46) to the Leg
Lever (5) with an ST4.2 x 20mm Screw (53).
Then, attach the Weight Clip (8) to the weight
tube on the Leg Lever (5).
5
19
54
35
35
37
16
42
42
15
41
41
6
7
43
35
16
1
15
Slot
4
45
37
Grease
5
53
46
8
Grease
Welded
Tubes
Grease
35
37
9
8. Insert the Long Pad Tube (31) through the Front
Leg (4).
Slide two Foam Pads (22) onto the Long Pad
Tube (31). Then, press two Pad Caps (23) into
the ends of the Long Pad Tube.
Attach the two Short Pad Tubes (not shown)
and the remaining Foam Pads (22) and Pad
Caps (23) to the Leg Lever (5) in the same
way.
9. See the inset drawing. Attach the tether on the
Small Pin (52) to the Curl Arm (50) with an
ST4.2 x 10mm Screw (17).
Hold the two Curl Arm Bushings (47) against
the end of the Leg Lever (5). Next, slide the
Curl Arm (50) downward over the Curl Arm
Bushings. Then, insert the Small Pin (52)
through the Curl Arm, the Curl Arm Bushings,
and the Leg Lever.
10. Attach the Curl Pad (20) to the Curl Post (6)
with two 6 x 25mm Screws (39).
8
9
10
23
23
20
6
39
50
52
5
47
31
22
22
22
22
22
4
5
23
23
50
52
17
10
12. Insert a Base Stabilizer (9) into the Base (7).
Attach the Base Stabilizer with five 10 x
18mm Screws (34) and five 10 Washers (35).
Attach the other Base Stabilizer (9) to the
Base (7) in the same way.
11
12
11. Insert the Curl Post (6) into the Front Leg (4).
Insert the Curl Post Knob (24) into the Front
Leg (4) and into one of the adjustment holes in
the Curl Post (6), and tighten the Curl Post
Knob. Make sure that the Curl Post Knob is
inserted through one of the adjustment
holes.
6
4
24
9
9
34
34 34
35
35
7