WELLTECH FXO-08 - RELEASE NOTE V101A Instruction Manual

Welltech Product Release Note
Date: April-21-2008
Model Name: FXO-08 Object: H.W. S.W.
Subject: Release Application Rom : 8fxosip.101a
Release Hold tone and IVR file
Release contents
Bug Fixed
Feature and Function Added
New release
Configuration Item Changed
Application Block Diagram
Hyperlink
1. WELLTECH WEB Site: http://www.welltech.com
2. Firmware Download:
3. User Manual:
Note
This is the first release of FXO-08, If you got FXO-08 sample before this release,
please follow the procedure shown below to upgrade the firmware.
Firmware updated procedure:
The Boot code and POST code of FXO-08 for the new version have been changed, and this version
added IVR files. You must use Telnet (command line interface) to upgrade the new firmware. Don’t
try to use WEB (HTTP) interface, it will make your FXO-08 crashed.
1. You will need a TFTP client/server software installed on the PC to perform the firmware update, you
can download this software from the following URL:
http://www.welltech.com/support/voip/TFTP/TFTP_Server.zip
If you already have a TFTP or FTP server in place, please disregard this step.
2. Change the IP address of your PC to 192.168.123.1
3. Connect your PC with the LAN port of FXO-08.
4. Execute your TFTP server and select the file path, then please follow the instructions explained below
to update the FXO-08 firmware.
Step of firmware updated

Step command Remark
1 On Windows desktop, click
StartÎRunÎcmd
Now under the command prompt
menu
2 telnet 192.168.123.123 Assuming the PC connected to the
LAN port of the WG2680 has an IP
address of 192.168.123.1
3 root login username
4 Password is blank, press enter key
5 rom –app –s 192.168.123.1 –f
8fxosip.101a
6 reboot To save new firmware
7 telnet 192.168.123.123
8 root login username
9 Password is blank, press enter key
10 flash –cleanall System will auto reboot,
11 Power Reset Power off/on
12 telnet 192.168.123.123 Reconnect
13 root login username
14 Password is blank, press enter key
15 rom –ht –s 192.168.123.1 –f
hold.100
Add Hold Tone
16 rom -gt -s 192.168.123.1 -f
greeting.102
Add GREETING files
17 rom –s 192.168.123.1 –ipivr 0
0.pcm 1 1.pcm 2 2.pcm 3 3.pcm 4
4.pcm 5 5.pcm 6 6.pcm 7 7.pcm 8
8.pcm 9 9.pcm . dot.pcm
Add IVR files
18 reboot
Note: To check whether the firmware upgrade process is completed or not, press the Enter key and
check if there is any response from the command line. If there is, then the firmware update is
complete, if there is no response, the firmware upgrade is still in process.