Wen 56380i User manual

This is a guide to replacing a broken spark plug boot for your WEN 56380i Inverter enerator.
This guide is best used in conjunction with the 56380i manual, included as a physical copy
with your unit and available on the WEN website page for the 56380i (link here), by clicking
“Click here to view the product manual”.
If at any point you need assistance, have questions, or want to order parts, call WEN customer
service at 1-800-232-1195, M-F, 8-5 Central Time, or email [email protected].
If replacing any parts, use only genuine replacement parts purchased from WEN Products. Use of replacement
parts not sold by WEN Products will void your warranty and could lead to decreased performance or injury.
ABLE OF CON EN S
Tools needed 1
Replacing the broken spark plug boot 1
OOLS NEEDED
•Pair of pliers
•Phillips-head screwdriver
ENSURE THAT THE EN INE IS COOL BEFORE BE INNIN ANY MAINTENANCE OR REPAIR WORK. FOLLOW
ALL SAFETY PROCEDURES LISTED IN YOUR OWNER’S MANUAL. USE COMMON SENSE. AVOID INJURY.
REPLACING HE BROKEN SPARK PLUG BOO
1. Make sure the engine is cool.
2. Use the Phillips-head screwdriver to remove the two
screws shown at right.
3. Remove the panel.
4. Locate the spark plug boot. Move the ignition coil (with
spark plug boot still attached) out of the way.
Date last modified: 2020/08/14

5. Use a pair of pliers to remove the broken part of the
spark plug boot from the spark plug. Pull it outwards,
away from the engine.
6. Make sure the ignition coil is easily accessible.
7. Use one hand to hold the ignition coil wiring steady.
Twist the spark plug boot off the ignition coil
(counterclockwise).
8. Twist the new spark plug boot onto the ignition coil
(clockwise) until it is tight. While holding the wiring, tug
the spark plug boot sideways to see if it loosens. If so,
tighten the boot more. It should not move when tugged.
9. Push the boot onto the spark plug. Re-assemble the
side panel. Check to make sure the generator starts up
properly.
QUES IONS? PROBLEMS?
Contact WEN Customer Service at 1-800-232-1195, M-F, 8-5 CST, or email
[email protected]
Date last modified: 2020/08/14