Weslo CADENCE LX25 User manual

Model No. WLTL42570
_;eria[ No.
Serial
Number
Decal
QUESTIONS?
As amanufacturer, we are com-
rn_ed to providing complete
customer satisfaction. If you
have questions, or if there are
mLssJng or damaged parts, we
will guarantee complete s_tis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
ta_ce_ free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.-FrL, 6 a.m.-6 p.rn, MST
USER'S MANUAL

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS ................................................................. 2
BEFORE YOU BEGIN ....................................................................... 4
ASSEMBLY ............................................................................... 5
OPERATION AND ADJUSTMENT ............................................................. 7
HOW TO FOLD AND MOVE THE TREADMILL .................................................. 10
MAINTENANCE AND TROUBLE-SHOOTiNG ................................................... 12
CONDITIONING GUIDELINES ............................................................... 14
ORDERING REPLACEMENT PARTS .................................................. gsck Cover
LIMITED WARRANTY ............................................................... Back Cover
Note: An EXPLODED DRAWING and aPART LIST are attached to the center of this manual Save the
EXPLODED DRAWING and PART LIST for future reference,
iMPORTANT PRECAUTIONS
extension _e_d.
12, Keep the power _ord arid _he surge protector
6. Ke_p_hfldren ur_derthe _ge of 12 and pets away from heate_lsurfaces_
avl_y f_t the treadmill at 811times. 13. Neve? move the walldng belt whil_ the power
7. Tt_ treadmill _hould be used only by persons
weighing 250 pounds or less.
8, Neveralfowntorethanonepersononthe
treadmill at a tlm_.
is turned off, Do not operate the treadmil_ if
the. power cord or plt_J is damaged= or If the
treadmill is not working properly. (See
REFORE YOU BEGtN on pagr8 4if the tread-
mill is not working properly.)

The deca! shown below has been placed on your treadmill. If the decal IS miss'rig, or If d "s no! legible
please call our Customer s_rvice Department, toll-free, to order a|ree repla_em_t_t decat (.see ORDERING
REPLACEMENT pARTS on the back cover of this manual). Apply the decal in t_e Iccatlon shown.

BEFORE YOU BEGIN
Thank you for select[ng the WESLO CADENC_ LX25
lreedmill, Tile CADENCE LX25 treadmill combines ad-
vanced technology witr_ innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you're not exercising, the unique CADENCE LX25 can
be folded up, requiring less than halt the floor spaca of
other treadmills.
For your benefit, read this manual carefully before
using the treadmill, Lfyou have additional questions,
please calf our Customer S_ice Department toLl-tree
at 1-800-999-3758, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number betor_ calling. The model
number of the treadmill is WLTL42570. The sedal
number can be found on a decal attached to the tread-
mill (see the front cover of this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Water Bottle Holder
IWater Bcttfe is not Towel Rack
Accesso WTray
Storage L
Mandmils
Waikin
RtGHT SIDE
Circuit
Breaker
Power
CoG
BACK Incline Leg Cushioned Walkit'_j Platform for maximum ex_l'cise comfort

ASSEMBLY
.... is Done
Assembly requires two people Set the treadmlg In acteared arsa and remove all packing maten_ .
dispose of the packing materials until assembly is completed. Refer to the drawings below to }denfify the parts
Used.in assembly: Assembly requires the fo!lowing tools: The include_ alien wtenchnch_and your own
phghp" ._=rewdr,ver _ and adjustable wrench _ .
U©
Handrail Washer (16)-2
L_.tch Screw (13)-2 Console pJate Screw (89)-8
Handrai_ Screw (32)-2
Extension Leg Screw (34)-2
i •
1. W_th the help of asecond person, carefulfy Jaythe
treadmill on its right side. (See the drawing _n page 4to
identify the dghl side, if necessary.) Insert the Extension
Legs (41) into the treadmill as shown. Make sure that the
Extension Legs are turned so the Base Pads (36) are on
the indicated sides. Attach each Exlension Leg with an
Extension Leg Screw (34).
With the help of B second person, carefully raise the
treadmill to the upright position se the ExtensTon Legs
(41) are resting flat on the floor.
2, Refer to HOW TO LOWER THE TREADMILL FOR USE
on page 11. Foflow the irlstr_ctions in step 2 to lower the
treadmill.
Wgh the help of a second person, insert aHenchalt (2)
into each side of the Oonsore (11) as shown. Align the
holes in the bottom of the Console with the holes in the
Handrails. Tighten eight Console Plate Screws (89) into
the bottom of the Console,
2
41
11

3. With the help of asecond person, hold the Console (11 )
near the right Upright (14) as shown.
Insert the Wire Harness (26) into the Right Upright (14).
Route the Wire Harness (26) through the notch in the
bracket on the dght Handrail (2) as shown. Insert the
bracket into the right Upright (14). Make sure that the
Wire Harness is not pinched.
4. Set the Handrails (2) on the Uprights (14) as shown.
Thread a Handrail Bolt (15) with a Handrail Washer (16)
into each Upright and Handrail. Do not tighter= the
Hsndrail Bolts yet.
Tighten a Handrail Screw (32) into the lower end ol each
Handrail (2), Be sure to push on the heads of the Handrail
Screws while tightening them. Next. tighte_ the Handrail
Bolts (15).
5. Attach the Storage Latch (12) 1othe left Upright (14) with
two Latch Screws (13). Be careful not to overtighten the
Latch Screws.
6. Remove the backing from the Adhesive Clip (74). Press
the Adhesive Clip onto the base of the Uprights (14} in
the indicated location. Press the AIMn Wrench (73) into
the Adhesive Clip.
Bracket. _ 12
4
7. Make sure that all parts are tightened before you use
the treadmill, TO protect the floor or carpet, place a
B mat under the treadmgl.

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE TM WALKING BELT
Your treadmill features awalking belt coated with
PERFORMANT LUBE TM, a high-performance lubricant.
Important: Never apply silicone spray or other sub*
stances to the walking belt or the walking platform.
They wgl deteriorate the walking belt and cause ex-
cessive wear.
HOW TO PLUG IN THE POWER CORD
not fit the O_ et t'm_,ea proper Outlet _1
stailed by aqua_lf,_d _lect ricJ_an_ .....
Your treadmill, like any ether type of sophisticated
electronic equipment, can be seriously damaged fay
sudden voltage changes in your home's power,
Voltage surges, spikes, and noise interference can re-
sult from weather conditions or from other appli_.nces
being turned on or off.
To decrease the pos-
sibigty of your tread-
mill being damaged,
atways use a surge
protector (not in-
cluded) with your
treadmgl.
Surge prolectors are
sold at most hardware
stores and department
stores, Use onty aUL-
listed surge p_ctector,
rated at 15 amps, with a
14-gauge cord Qffive
feet or tess in length.
This product must be
grounded. If ft should
malfunction or break
down, grounding pro-
vides a path of least re-
sistance for electric cur-
rent to reduce the risk of
2
MetJ
electric shock, This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into asurge
protector, and plug the surge protector into an ap-
propriate outlet that is properly installed and
grounded in accordance with all Ioca! codes and
ordinances.
This product is for use on a nominal 120-volt cimuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 berow. A temporary adapter that
looks like the adapter glustrated in drawing 2may he
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a properly grounded out-
let is not available.
The temporary adapter should be used only until a
propedy grounded outlet (drawing 1) can be insta!led
by aqualified electrician.
The green-colored rigid ear, lug, orthe like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover,
Whenever the adapter is used it must be held in place
by a metal screw, Some 2-pole receptacle outlet box
covers 8r_ Rot grounded. Contact a qualified elec-
tribian to determine if the outlet box cover is
grounded before using an adapter.
/Grounded Outlet Box
/Grounding Pi.n
_undlng Plug
_munded Outlet
Treadmill Power Cord_
Groundin
Grounding Pin,_
Grounded Outlet Box
'Surge Protector

DIAGRAM OF THE CONSOLE
Inct_eSu(ton Monitor Disp(ays Speed Cont_l
Key Note: If there is athin sheet _f
clear plastic on the face of the
_nsole, remove it.
BA'R'ERY INSTALLATION
The co_oJe requires either two Dr three "AA"
batteries (not included); alkaline batte es a e
recommended.
To install batteries, first press the tab on the batte_
cover atld o_etl the balte_j cover. Press the batteries
intothebatterycompartment,withthenegativeendsof
the batteries (m_rked "-") touching the springs. Press
the tab on the battery coverandcio_e the battery
cover.

REMOVE THIS EXPLODED DRAWING AND
PART LIST FROM THE MANUAL. Save this
EXPLODED DRAWING and PART LIST for
future reference.
Note: Specifications are subject to change without notice. For information about
ordering replacement parts, sea the back cover of the User's Manual.

EXPLODED DRAWiNG--Model No. WLTL42570 RO997B
22 67 32
87 86 39 63
74 75 51
16
71
72 i.
71
16
39
46
13