Westermo Ibex-630 Series User manual

www.westermo.com
Ibex-630 Series
EN 50155 LTE and WLAN Router

Ibex-RT-630 Series User Guide
Westermo Network Technologies 2
Contents
1 General Information........................................................................................................................ 4
1.1 Legal Information .................................................................................................................... 4
1.2 About This Guide..................................................................................................................... 4
1.3 Software Tools......................................................................................................................... 4
1.4 License and Copyright for Included FLOSS .............................................................................. 4
2 Safety and Regulations.................................................................................................................... 5
2.1 Warning Levels ........................................................................................................................ 5
2.2 Safety Information................................................................................................................... 6
2.3 Care Recommendations .......................................................................................................... 8
2.4 Product Disposal...................................................................................................................... 8
2.5 Compliance Information.......................................................................................................... 9
2.5.1 Agency Approvals and Standards Compliance................................................................ 9
2.5.2 United States - FCC........................................................................................................ 10
2.5.3 United States - AREMA.................................................................................................. 11
2.5.4 Canada - IC..................................................................................................................... 11
2.5.5 Europe - Simplified Declaration of Conformity ............................................................. 11
3 Product Description....................................................................................................................... 12
3.1 Product Description............................................................................................................... 12
3.2 Available Models ................................................................................................................... 12
3.3 Hardware Overview............................................................................................................... 13
3.3.1 Front Side View.............................................................................................................. 13
3.3.2 Front Side Label............................................................................................................. 13
3.3.3 Rear Side Label .............................................................................................................. 14
3.3.4 Interface Ports View...................................................................................................... 14
3.4 Connector Information.......................................................................................................... 14
3.4.1 Power Input and I/O Connection .................................................................................. 14
3.4.2 SIM Card Slot ................................................................................................................. 15
3.4.3 Ethernet Ports ............................................................................................................... 16
3.4.4 Antenna Ports................................................................................................................ 17
3.5 LED Indicators........................................................................................................................ 17
3.6 Factory Reset......................................................................................................................... 18
3.6.1 Factory Reset Procedure ............................................................................................... 18
3.7 Dimensions............................................................................................................................ 18
4 Installation..................................................................................................................................... 20

Ibex-RT-630 Series User Guide
Westermo Network Technologies 3
4.1 Mounting............................................................................................................................... 20
4.2 Earth Connection................................................................................................................... 20
4.3 Connection of Cables............................................................................................................. 21
4.4 Cooling................................................................................................................................... 21
4.5 Replacement of Product........................................................................................................ 23
5 Specifications................................................................................................................................. 24
5.1 Interface Specifications......................................................................................................... 24
5.2 Type Tests and Environmental Conditions............................................................................ 28
6 Abbreviations and Terms .............................................................................................................. 30
7 Revision Notes............................................................................................................................... 32

Ibex-RT-630 Series User Guide
Westermo Network Technologies 4
1General Information
1.1 Legal Information
The contents of this document are provided “as is”. Except as required by applicable law, no
warranties of any kind are made in relation to the accuracy and reliability or contents of this
document, either expressed or implied, including but not limited to the implied warranties of
merchantability and fitness for a particular purpose. Westermo reserves the right to revise this
document or withdraw it at any time without prior notice. Under no circumstances shall Westermo
be responsible for any loss of data or income or any special, incidental, and consequential or indirect
damages howsoever caused. More information about Westermo can be found at
www.westermo.com.
1.2 About This Guide
This guide is intended for installation engineers and users of the Westermo products. It includes
information on safety and regulations, a product description, installation instructions and technical
specifications.
1.3 Software Tools
Related software tools are available at www.westermo.com.
1.4 License and Copyright for Included FLOSS
This product includes software developed by third parties, including Free/Libre Open Source
Software (FLOSS). The specific license terms and copyright associated with the software are included
in each software package respectively. Please visit the product web page for more information. Upon
request, the applicable source code will be provided. A nominal fee may be charged to cover
shipping and media. Please direct any source code request to your normal sales or support channel.

Ibex-RT-630 Series User Guide
Westermo Network Technologies 5
2Safety and Regulations
2.1 Warning Levels
Warning signs are provided to prevent personal injuries and/or damages to the product. The
following levels are used:
Level of warning
Description
Consequence
personal injury
Consequence
material damage
WARNING
Indicates a potentially
hazardous situation
Possible death or
major injury
Major damage to the
Product
CAUTION
Indicates a potentially
hazardous situation
Minor or moderate
injury
Moderate damage to
the product
NOTICE
Provides information in order
to avoid misuse of the
product, confusion or
misunderstanding
No personal injury
Minor damage to the
product
NOTE
Used for highlighting general,
but important information
No personal injury
Minor damage to the
product
Table 1 Warning levels

Ibex-RT-630 Series User Guide
Westermo Network Technologies 6
2.2 Safety Information
Before Installation:
Read this manual completely and gather all information available on the product. Make sure it is fully
understood. Check that your application does not exceed the safe operating specifications for the
product.
This product relies on convection cooling. Make sure that it is installed so that the ambient
temperature is within the specified temperature range, e.g. by avoiding obstruction of the airflow
around the product.
WARNING –SAFETY DURING INSTALLATION
The product must be installed and operated by qualified service personnel and
installed info an apparatus cabinet or similar, where access is restricted to service
personnel only. For Ibex products outdoor installation is allowed.
During installation, ensure a protective earthing conductor is first connected to the
protective earthing terminal (only valid for metallic housings). Westermo
recommends a cross-sectional area of at least 4 mm2.
If the product does not have a protective earthing terminal, then the DIN-rail must
be connected to protective earth. Upon removal of the product, ensure that the
protective earthing conductor, or the connection to earth via the DIN-rail, is
disconnected last.
WARNING - HAZARDOUS VOLTAGE
Do not open a connected product. Hazardous voltage may occur when connected
to a power supply.
WARNING - PROTECTIVE FUSE
The power supply wiring must be sufficiently fused. It must be possible to
disconnect manually from the power supply. Ensure compliance to national
installation regulations.
WARNING - POWER SUPPLY CONNECTION
There are safety regulations on which power sources that shall be used in
conjunction with the product.

Ibex-RT-630 Series User Guide
Westermo Network Technologies 7
WARNING –RADIO PRODUCTS
Observe the usage limitations of radio products at filling stations, in chemical
plants, in systems with explosives or potentially explosives locations.
The devices may not be used in airplanes. Exercise particular caution near personal
medical aids, such as pacemakers and hearing aids. Never perform work on the
antenna system during a thunderstorm.
To fulfill human safety, a minimum separation distance of 20 cm or more should
be maintained between the antenna of the product and personell during
operation.
CAUTION - HOT SURFACE
Be aware of that the surface of this product may become hot. When it is
operated at high temperatures, the external surface may exceed Touch
Temperature Limit according to the product's relevant electrical safety standard.
CAUTION - CORROSIVE GASES
If the product is placed in a corrosive environment, it is important that all unused
connector sockets are protected with a suitable plug, in order to avoid corrosion
attacks on the goldplated connector pins.
CAUTION - CABLE TEMPERATURE RATING
There may be a requirement on the minimum temperature rating of the cable to
be connected to the field wiring terminals, see Interface Specifications.

Ibex-RT-630 Series User Guide
Westermo Network Technologies 8
2.3 Care Recommendations
Follow the care recommendations below to maintain full operation of the product and to fulfill the
warranty obligations:
•Do not drop, knock or shake the product. Rough handling above the specification may cause
damage to internal circuit boards.
•Do not use harsh chemicals, cleaning solvents or strong detergents to clean the product.
•Do not paint the product. Paint can clog the product and prevent proper operation.
If the product is used in a manner not according to specification, the protection provided by the
equipment may be impaired.
If the product is not working properly, contact the place of purchase, nearest Westermo distributor
office or Westermo technical support.
NOTE
Devices not used shall be kept in the factory sealed moisture barrier bag. Open,
unsealed devices should not be kept unpowered for more than 30 days.
2.4 Product Disposal
This symbol means that the product shall not be treated as unsorted municipal waste when disposing
of it. It needs to be handed over to an applicable collection point for recycling electrical and
electronic equipment.
By ensuring the product is disposed of correctly, you will help to reduce hazardous substances and
prevent potential negative consequences to both environment and human health, which could be
caused by inappropriate disposal.
Figure 1 WEEE symbol for treatment of product disposal

Ibex-RT-630 Series User Guide
Westermo Network Technologies 9
2.5 Compliance Information
REGULATORY NOTICE
Any changes or modifications shall be approved by the party responsible for
compliance. If not, users could void the user's authority to operate the equipment.
Country code and antenna gain needs to be set properly for correct functionality in
the installed country.
2.5.1 Agency Approvals and Standards Compliance
Type
Approval/Compliance
Climate
•EN 50155, class OT4, Railway applications –Electronic equipment used on
rolling stock
EMC
•EN 50121-3-2, Railway applications –Electromagnetic compatibility, Part 3-
2: Rolling stock - Apparatus
•ETSI EN 301 489-1, Electromagnetic compatibility (EMC) and Radio spectrum
Matters (ERM) for radio equipment and services - Part 1: Common technical
requirements
•ETSI EN 301 489-17, Electromagnetic compatibility (EMC) and Radio
spectrum Matters (ERM) for radio equipment - Part 17: Specific conditions
for Broadband Data Transmission Systems
•ETSI EN 301 489-19, Electromagnetic Compatibility (EMC) standard for radio
equipment and services - Part 19: Specific conditions for Receive Only
Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data
communications and GNSS receivers operating in the RNSS band (ROGNSS)
providing positioning, navigation, and timing data
•ETSI EN 301 489-24, Electromagnetic compatibility (EMC) and Radio
spectrum Matters (ERM) for radio equipment and services - Part 24: Specific
conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and
portable (UE) radio and ancillary equipment
•ETSI EN 301 489-52, Electromagnetic Compatibility (EMC) standard for radio
equipment and services - Part 52: Specific conditions for Cellular
Communication Mobile and portable (UE) radio and ancillary equipment
•EN 50155, Railway applications, Approval/Compliance
Mechanical
(Shock and
vibration)
•EN 61373, category 1, class A and B
•EN 60068-2-27, 100 m/s2, 30 ms
•MIL STD 810G Method 516.7, 10 g, 11 ms
Insulation
(Coordination
and test)
•EN 50124-1, Railway applications –Insulation coordination
•EN 50155, Railway applications - Electronic equipment used on rolling stock
Radio
Communication
•ETSI EN 300 328, Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz ISM band and using wide band
modulation techniques
•ETSI EN 301 893, 5 GHz RLAN

Ibex-RT-630 Series User Guide
Westermo Network Technologies 10
•IEEE 802.11, Wireless LAN Medium Access Control (MAC) and Physical Layer
(PHY) Specifications
•FCC-47-15, Radio frequency devices
•FCC-47-15.407
•FCC-47-22, Public mobile services
•FCC-47-24, Personal communications services
•FCC-47-27, Miscellaneous wireless communications services
•ETSI EN 301 908-1
•3GPP LTE Advanced standard
Safety
•EN/IEC 62368-1, Safety Requirements for audio/video, information and
communication technology equipment
•EN 45545-2, Requirements for fire behaviour of materials and components
on railway vehicles
•NFPA 130, Fire protection and life safety requirements for fixed guideway
transit and passenger rail systems
Table 2 Agency approvals and standards compliance
2.5.2 United States - FCC
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (i.) this device may not cause harmful interference and (ii.) this device must accept any
interference received, including interference that may cause undesired operation.
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20
cm or more should be maintained between the antenna of this device and persons during operation.
To ensure compliance, operations at closer distances than this are not recommended.
This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This product generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception, which can be determined
by turning the product off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the unit and receiver
•Connect the product into an outlet on a circuit different from that to which the receiver is
connected
•Consult the dealer or an experienced radio/TV technician for help
NOTE
This product contains FCC IDs 2AEJD-103902-DT50RF (WLAN) and
XMR201901EM12G (LTE).

Ibex-RT-630 Series User Guide
Westermo Network Technologies 11
2.5.3 United States - AREMA
The product has been tested according to AREMA Part 11.5.1 and 11.5.2 environmental class I and
exposure class Internal.
2.5.4 Canada - IC
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the
following two conditions:
•This device may not cause interference.
•This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
•l’appareil ne doit pas produire de brouillage.
•l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
NOTE
This product contains the IC Certification numbers 9301A-103902DT50 (WLAN)
and 10224A-201901EM12G (LTE).
2.5.5 Europe - Simplified Declaration of Conformity
Hereby, Westermo declares that this product is in compliance with applicable EU directives. The full
EU declaration of conformity and other detailed information is available at
www.westermo.com/support/product-support.
Figure 2 The European conformity marking

Ibex-RT-630 Series User Guide
Westermo Network Technologies 12
3Product Description
3.1 Product Description
The RT-630 is an EN50155 LTE and WLAN Router, developed for demanding industrial and railway
applications. It makes full use of the 3G and 4G cellular networks and 2.4 and 5 GHz WLAN bands.
The device utilizes a high performance GNSS receiver with concurrent reception of up to 3 GNSS
signals from GPS, Galileo, GLONASS or BeiDou systems.
Power
Supply
Gigabit
Ethernet CPU
WLAN
802.11n
LTE 4G
GNSS
Gigabit
Ethernet
DC
X1
X2
A1
A2
A3
A4
A5
A6
Figure 3 Ibex-RT-630-LV / Ibex-RT-630-HV block diagram
The Westermo configuration management tool, WeConfig, can be used for discovery and basic
configuration and maintenance. The configuration can be done via SNMP or via WebGUI. The status
information is available in local LED status indicators, and through SNMP/WebGUI.
The Mobile Communication Gateway router is designed to withstand the tough onboard
environmental conditions and can be remotely managed using web browser or SNMP management
tools.
Integrating hardware, software and network design support tools, this router platform offers
advanced capabilities, the lowest total cost of ownership and will create the most reliable and
resilient networks.
The router is engineered to maintain uninterrupted data communication, even in exceptionally harsh
environments. Tested and certified to withstand extreme temperatures, vibrations and shocks, these
routers only use industrial grade components which contributes towards a market leading mean time
between failure (MTBF), maximized service life, and reduced operational and life cycle costs.
3.2 Available Models
Art. no.
Model
Region
PoE port
Rated voltage
3623-075001
Ibex-RT-630-LV EU
Europe
X2
24VDC
3623-075002
Ibex-RT-630-LV NA
North America
X2
24VDC
3623-075101
Ibex-RT-630-HV EU
Europe
-
72-110VDC
3623-075102
Ibex-RT-630-HV NA
North America
-
72-110VDC
Table 3 Available Models

Ibex-RT-630 Series User Guide
Westermo Network Technologies 13
3.3 Hardware Overview
3.3.1 Front Side View
No.
Description
No.
Description
1
SIM card slot
2
Gigabit Ethernet ports X1 and X2
3
Protective earth terminal
4
Power input DC
5
Front side label
6
Warning symbol for surface
temperatures above +60°C
7
Antenna ports A1-A6
8
LED indicators
Figure 4 Location of interface ports and LED indicators
3.3.2 Front Side Label
No.
Description
Remarks
1
Article number
2
QR code
The data matrix is: AAAAAAAAARR-1-VV-SSSSSSSS-YYWW
AAAAAAAAA = Article number
RR = Region code
VV = Product revision
SSSSSSSS = Serial number
YY = Manufacturing Year
WW = Manufacturing Week
3
Manufacturing date
The Date Format is: YYWW
YY = Manufacturing Year
WW = Manufacturing Week
4
Serial number
Figure 5 Front side label content
  










  


  

Ibex-RT-630 Series User Guide
Westermo Network Technologies 14
3.3.3 Rear Side Label
Figure 6 Rear side label content
3.3.4 Interface Ports View
Figure 7 View to interface ports
3.4 Connector Information
3.4.1 Power Input and I/O Connection
M12 A-coded 4-pin male power connector according to IEC 61076-2-101
Marking
Position
Direction
Description
DC
1
+DC
Positive terminal
2
-
3
-DC
Negative terminal
4
-
Housing
Shield
Chassis of product (ground)
Table 4 Power input connection






C O M P L I A N T
R o H S








 






Ibex-RT-630 Series User Guide
Westermo Network Technologies 15
NOTE
If device is powered by PoE, the protective dust cap which is part of the delivery
must be closed to protect the power interface from water or dust ingress.
3.4.2 SIM Card Slot
Figure 8 SIM card slot
To remove the SIM card drawer, untighten the two knurled screws until they are loose and not
anymore connected to the unit frame. Carefully move the drawer out of the frame. Place the SIM
cards into the sockets in slot 1 and/or slot 2 with the contacts facing down. Let chamfered corners
align according markings on the drawer.
Put the SIM card drawer back into the unit, ensuring that it fits into place and tighten the knurled
screws on both sides until the drawer is fully inserted and plane with the unit frame.
NOTICE
To use the device in its specified temperature range it is important to use a robust
industrial SIM card with extended temperature range.
NOTICE
In order to guarantee proper IP against dust and water, please check carefully that
the drawer is fully inserted and screws are properly tightened.
NOTICE
Before removing and inserting the SIM drawer, ensure that power has been turned
off by removing the power connector from the unit.
 


Ibex-RT-630 Series User Guide
Westermo Network Technologies 16
NOTE
The sim cards must be fully inserted into the sockets until the mechanical stop.
NOTE
The product supports two SIM cards with the restriction that only one SIM card is
active.
3.4.3 Ethernet Ports
The product includes two Ethernet ports X1 and X2 which supports auto-negotiated 10 Mbit/s, / 100
Mbit/s and 1000 Mbit/s operation. Automatic MDI/MDIX crossover is supported for 10BASE-T,
100BASE-T, 1000BASE-T operation.
M12 X-coded 8-pin female Ethernet connector according to IEC 61076-2-109
Marking
Position
Direction
Description
X1 / X2
1
In / Out
DA+
2
In / Out
DA-
3
In / Out
DB+
4
In / Out
DB-
5
In / Out
DD+
6
In / Out
DD-
7
In / Out
DC-
8
In / Out
DC+
Housing
Shield
Chassis of product (ground)
Table 5 Ethernet connection
PoE connection on X2 (Ibex-RT-630-LV only)
Position
Device mode A
Device mode B
1
+DC
2
+DC
3
-DC
4
-DC
5
-DC
6
-DC
7
+DC
8
+DC
Table 6 Ethernet X2 PoE connection
NOTE
PoE is supported on X2 for the LV product variant only.









Ibex-RT-630 Series User Guide
Westermo Network Technologies 17
NOTE
If the Ethernet function is not used, the protective dust cap which is part of the
delivery must be closed to protect the interface from water or dust ingress.
3.4.4 Antenna Ports
The antenna connectors are identified on the product with A1 to A6. QMA industrial standard
connector is used.
A1 to A3 are used for WLAN communication. At least A1 must be connected to an external WLAN
antenna. The antenna configuration is made through the Software interface.
A4 and A5 are used for LTE communication. Both antennas ports must be used and connected to
external LTE antennas.
A6 is used for the included GNSS receiver. The antenna port must be connected to an external GNSS
antenna.
NOTICE
Any unused antenna ports must be properly terminated with 50-Ohms, otherwise
the device might be damaged when power is applied to a non-terminated antenna
port.
NOTE
To ensure specified IP protection, suitable QMA connectors / cables and
terminations must be used.
3.5 LED Indicators
LED
Description
DC
Power status
OPR
Operation status
ERR
Error status
X1
Ethernet status for X1 port
X2
Ethernet status for X2 port
NOTE
Refer to management guide for detailed LED status indication.

Ibex-RT-630 Series User Guide
Westermo Network Technologies 18
3.6 Factory Reset
To reset the product into factory default settings, a reset adapter is needed which is plugged into one
of the Ethernet ports X1 or X1 during startup.
Art. no.
Description
3623-0799
Factory Reset Plug, X-coded
Table 7 Factory reset plug
3.6.1 Factory Reset Procedure
Step
Description
1
Plug the factory reset adapter to one of the Ethernet interfaces
2
Power the product
3
Wait until factory reset adapter is detected. This is indicated by
solid ORANGE OPR LED and RED ERR LED
4
Remove factory reset adapter within 15 seconds
5
Successful initiation of the factory reset is indicated by blinking
ORANGE OPR LED and RED ERR LED
Table 8 Factory reset procedure
3.7 Dimensions
Dimensions are stated in mm and are regardless variants.
A1
A2
A3
A4
A5
A6
DC
X2
X1

Ibex-RT-630 Series User Guide
Westermo Network Technologies 19
Figure 9 Dimensional drawing
  



Ibex-RT-630 Series User Guide
Westermo Network Technologies 20
4Installation
4.1 Mounting
The product is fixed with the four fixing points located at the corners of the product. M5 or M6
screws are used for the fixation of the product. The screws are tightened with min. 3.0 Nm (fixing
screw ISO 898/1, quality class 8.8).
NOTICE
All four specified fixing points must be used for fixing. The installation surface
should be flat to have all fixing points connected to the surface.
NOTE
For indoor installation consider additional protection against dust to ensure proper
heat dissipation.
NOTE
For outdoor installation consider additional protection against sun radiation, dust
and dirt to optimize ambient temperature range.
NOTE
Unused connectors must be covered by a protective cap (delivered with
the product), tightened to the specified torque in order to fulfill the
specified ingress protection code.
4.2 Earth Connection
For correct function, the earth connection at the grounding point needs to be properly connected to
a solid ground. An M5 grounding screw at the housing is used for grounding. A short wire with a cross
section of at least 4 mm2shall be used. The grounding wire is set below the rip-lock washer. The nut
is fixed for good reliable grounding contact. The tightening torque of the nut shall be 2.0 Nm.