Western Digital SanDisk SecureAccess IXPAND 3.0 32GO User manual

NOTICE
MARQUE :
REFERENCE :
CODIC :
SANDISK
IXPAND 3.0 32GO
4223411

QUICK START GUIDE
Page 5 SanDisk SecureAccess™
Introduction
Bienvenue à SanDisk SecureAccess™ !
SanDisk SecureAccess est une façon rapide et simple de stocker et de protéger vos fichiers
importants et confidentiels sur une clé USB de SanDisk®. Il suffit de créer un coffre-fort privé et
d'y déposer vos précieux fichiers. L'accès au coffre est protégé par un mot de passe personnel et
vos fichiers sont automatiquement cryptés. Par conséquent, même si vous prêtez votre clé USB
Sandisk, que vous la perdez ou qu'on vous la vole, vos fichiers sont à l'abri.
Pour ce qui est de la protection de vos fichiers privés, vous pouvez faire confiance à SanDisk®!
Systèmes d’exploitation pris en charge :
Windows Vista®
Windows®7
Windows 8
Windows 10
Mac OS® X v10.7+
Matériel :
Port USB disponible
Clé USB SanDisk
Mise en route
Après avoir connecté votre clé USB SanDisk®à l'ordinateur, cliquez deux fois sur le fichier
SanDiskSecureAccessV3.01_win.exe (exécutable) pour exécuter le logiciel SanDisk SecureAccess™
(Fig. 1). (Sur certains ordinateurs, vous aurez peut-être à ouvrir le répertoire pour localiser le
lecteur connecté.)
Fig. 1
Configuration
La configuration d'un coffre-fort est simple !
1. Saisissez un mot de passe personnel pour accéder au coffre. Le mot de passe doit disposer
d'au moins 6 caractères, ces derniers devant être alphabétiques et numériques. Entrez un
indice pour vous en souvenir facilement (Fig. 2).
Fig. 2
2. Cliquez sur ‘OK.

QUICK START GUIDE
Page 6 SanDisk SecureAccess™
Vous êtes maintenant prêt à protéger vos fichiers importants et confidentiels dans votre nouveau
coffre-fort et à en défendre l'accès ! (Fig. 3)
Fig. 3
Ajout de fichiers ou de dossier dans le coffre-fort privé
1. Sélectionnez les fichiers à ajouter et faites-les glisser dans l'affichage principal (Fig. 4).
Fig. 4
2. Ajoutez des fichiers manuellement en cliquant sur la touche Ajout de fichiers située en
haut à droite de la page principale, puis sélectionnez les fichiers que vous souhaitez
ajouter (Fig. 5a et 5b).
Fig. 5a
Fig. 5b

Western Digital Technologies, Inc.
951 SanDisk Drive, Milpitas, CA 95035
Western Digital Technologies, Inc. is the seller of record and
licensee in the Americas of SanDisk® products.
©2016 Western Digital Corporation. All rights reserved.
USER GUIDE
iXpand™ Flash Drive
UNIQUEMENT EN ANGLAIS

Introduction
Getting Started
•Connecting to iPhone/iPad
•Charging
•Understanding the LED indicator
Applications
•App Overview
•Camera Roll Sync
•File Management
•Photo
•Video
•Music
•Password Protection
•Sharing
•Contact Management
Device Settings
•Drive Name
•Formatting
•Firmware update
Troubleshooting & Support

Instructional Icons
Warning
Information
Quick Tip

Introduction
iXpand Flash Drive Overview
Automatically syncs photos and videos from camera roll when connected.
Transfer photos and videos from the camera roll to the drive to free up
iPhone/iPad memory.
Watch popular-format movies directly from the drive1.
Encrypts files across iPhone, iPad, and computers for secure transfer2.
Lightning Connector
USB Connector
LED Indicator
Figure: iXpand Flash Drive layout

Works with
iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, iPhone 6 Plus, iPad Air ™, iPad mini ™, iPad
with Retina display and newer (iOS 7.1+).
Windows vista®, Windows 7, Windows 8, Mac OS X v10.6+.
Specifications
Interface: Lightning and USB 2.0 connectors
Available in: 16GB, 32GB and 64GB3
Operational Temperature: 0~60° C.
Dimensions: 64.17mm x 36.78mm x 11.80mm
Battery: pre-charged, ready to use
1 Support for .WMV, .AVI, .MKV, .MP4, .MOV video formats. Compatible device required.
2 Password protection uses 128-bit AES encryption and is supported by iOS 7+, Mac OS X v10.6+ (Software download
required for Mac, (see www.sandisk.com/support/ixpandflashdrive) Windows Vista, Windows 7 and Windows 8.
31GB=1,000,000,000 bytes. Actual user storage less.

Getting Started
Connecting to iPhone/iPad
Physical connection
Gently lift the Lightning connector slightly to connect to iPhone/ iPad
Installing the app
When you’ve connected the drive to your iPhone or iPad, you’ll be prompted to
install the companion iXpand Sync app.

1If this does not occur, please be sure the drive is fully charged. On the screen,
select “App Store”.
2Install the “iXpand Sync” app from the App Store.
Charging iXpand Flash Drive
Plug your drive into a computer USB port or a USB AC adaptor* to charge it.

* USB AC adaptor: not included with the drive
LED Indicator
The LED on the side of iXpand Flash drive indicates its battery, charging and transfer
status as explained below
•Green –sufficient battery
•Red –low battery level. Charge by plugging the device to a USB port of PC/Mac
computer or a USB AC adaptor
•Amber- charging in progress. Will become green when done
•Blinking-file transfer in progress. Do not disconnect the drive

Applications
App overview
iXpand sync app is the companion to your iXpand Flash Drive. Its major functions:
1. Add photos/videos from the camera roll to the drive with the ‘+’ button.
2. Access other functions - camera sync, “My Downloads”, settings and transfer
contacts through the menu icon in the top left corner.

Camera Roll Sync
You can back up your camera roll to the iXpand Flash Drive by setting up auto-sync or
manually syncing as needed.
Automatic Sync
Set-up once and transfer your camera roll to the drive automatically each time the
drive is connected.
To set-up:
1Connect the iXpand Flash Drive to the iPhone/iPad.
2On the app, go to Menu Camera Sync.
3Turn on the “Automatic Sync” option on the camera sync screen.
Syncing may take longer than normal the 1st time. Once set up, only newly added
files will be copied to the drive.
Manual Sync
Sync your camera roll with the drive as needed using manual sync.
To sync:
1Connect the iXpand Flash Drive to your iPhone/iPad.
2Go to Menu Camera Sync.

3To change the destination of the synced files on the drive, select the “Sync
Destination” as a folder on the drive.
4Select “Sync Now”.
5All the files in your Camera Roll will be copied to the drive in the folder specified
as the Sync Destination.
Syncing may take longer than normal the 1st time. Once set up, only newly added
files will be copied to the drive.
File Management
Use your iXpand Flash Drive and iXpand sync app to transfer and manage files
between your iPhone, iPad, PC and Mac computer.
Transfer files from your iPhone or iPad to the drive
1Connect the iXpand Flash Drive to your iPhone/iPad.
2Select the add file button “+”.
3When prompted to “select files”, choose the files you want to transfer from
iPhone/iPad to the drive.
4“Select Destination” to specify where to store the files on your drive.
You can choose “New Folder” option to create a new folder as the destination of the
file transfer on the drive.
Transfer files from drive to iPhone/iPad

1Connect the iXpand Flash Drive to your iPhone/iPad.
2Press “Select” button to choose the files from the drive.
3Press at the bottom of the screen.
4Choose “Save to My Downloads” or, if you’re copying iOS-supported photos and
videos only, choose “Save Images/Videos” to save them to the Camera Roll
5The selected files will be saved to your phone.
Files downloaded to My Downloads are accessible using the iXpand sync app even
when drive is not connected.
Transfer files between PC and drive
To transfer files between your iXpand Flash Drive and computer simply plug the
iXpand Flash Drive into your computer’s USB port.
1In the AutoPlay window, click Open folder to view files:
2Drag and drop music, videos, photos, and documents between your computer
and the iXpand Flash Drive window.

Transfer files between Mac computer and drive
To transfer content between your iXpand Flash Drive and Mac computer:
1Plug your iXpand Flash Drive into your Mac computer’s USB port.

2Drag and drop music, videos, photos, and documents between your Mac
computer and the iXpand Flash Drive window.
Delete files
1Connect the iXpand Flash Drive to your iPhone/iPad.
2Press “Select” and choose the files you’d like to delete from the drive.
3Press at the bottom of the screen.
You can swipe left on a file icon in list view and choose “delete” to easily remove
individual files.

Search
1In the file view, pull down the screen.
2You will see a search box appear at the top. Enter the file name you would like to
find.
3You’ll see search results appear for any matching files.
Photos
Supported file formats