Wet Sounds VENUE Series User manual

VS-SMC-65
6.5” In Ceiling Speaker

Wet Sounds professional audio products represent
the ultimate in high performance audio. Wet Sounds
speakers are specically engineered to withstand the
rigorous outdoor environment.
The Wet Sounds VENUE Series were designed to provide
amazing output combined with a cutting edge style.
Utilizing state of the art acoustic engineering and three
dimensional computer aided design, Venue Series
represent the most advanced outdoor speakers in the
world.
Please take a moment to read the instruction manual
before starting your installation. If you have any
questions or concerns, please contact your certied
Wet Sounds dealer or Wet Sounds:
877-WET-SPKR (1-877-938-7757)
www.wetsounds.com
CONGRATULATIONS!
Thank You for Your Wet Sounds VENUE SERIES Purchase.

1
VS-SMC-65
Diameter
Cut Out
Depth
8.18"
9.3"
2.12"
Sensitivity 88dB 1w/1m
Freq. Resp. 55Hz - 20kHz
Impedance 8 Ohm
RMS Watts
Peak Watts 100
50

2
Step 1 - Use the included template to trace hole cut-out
onto desired mounting location. Cut-out traced outline.
Step 2 - Connect the speaker signal connections from the
amplier to the speaker terminals (red + / black -).
Pos + Neg -

3
Step 3 - Remove magnetically retained grille. Install
speaker into mounting location and tighten bafe screws
to engage mounting brackets. Once fully tightened, the
brackets will clamp to the mounting surface securing the
speaker in place.
Step 4 - Reinstall magnetically retained grille.