Wharfedale Pro D300 Series User manual

D
[ameI
(illWHARFEDALE
BR I TA I N'S MOST FAMOUS LOUDSPEAKERS
D310
D320
D330
D340
D350
D300C
D300SR
User's Manual

Important Safety Information
Before installing this product read all these instructions!
~ This symbol indicates that there are important operating and maintenance instruction s in the literature
~ accompanying this unit.
Read these instructions. Keep these instruction s. Heed all warnings. Follow all instructions.
Before making any connections, switch all the units in your system off at th e mains .
Set the volume control at minimum when you sw itch on your system or change sources, and turn the level up gradually .
DO NOT use your amplifier at full volume.
Ensure that all loudspeakers in the system are correctly wired.
DO NOT subject your loudspeakers to excessive cold, heat , humidity or sunlight.
Loudspeakers should not be placed directly facing other hi-fi units, or share the sa me shelf or cabinet.
DO NOT place heavy objects on top of loudspeakers.
Some manufacturers forbid the placing of objects on top of their TV sets . Check your TV handbook before installing the speaker directly on your
TV set. Consult your TV dealer if you are in any doubt .
DO NOT connect speaker terminal s to the mains s upply .
DO NOT dismantle the loudspeaker. There are no user serviceable parts inside it and you will void the warranty by doing so .
Refer all
servicing to qualified service per so nnel. Servicing is required when the apparatus ha s been damaged in any way, the apparatu s has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Caution: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this device .
Unpacking Your Loudspeaker
D300 loudspeakers come in different shapes and sizes . If you are unpacking a floor stander, please remember that these units are heavy . We
suggest that you have someone to assist you .
Lift
the loudspeaker carefully out of the packing. DO NOT try and lift the loudspeaker using the protective bag.
Unpack the accessories carefully.
If there is any sign of damage or if the content s are incomplete, report this to your dealer as soon as possible.
Retain
the packing for future safe transport of the product. If you dispose of the packing, do so with respect to any recycling provisions in your area.
ATTA CHING THE SPIKES
CAUTION: SPIKES ARE SHARP.
Make sure that there are no wires or hidden obstacles that could be damaged by the spikes
in the immediate operational area of the speakers.
NEVER
drag a loudspeaker on its spikes. always lift it. If the item is heavy get assistance.
A
mounting hole is located at each corner of the plinth . Thread a spike through each hole .
Tighten
the collar finger tight so that the spike is secure but not locked inplace.
Afterall
the spikes are attached, invert the loudspeaker and place it carefully on the floor.

Preparing the D300 Loudspeakers
Stands and Brackets
The bookshelf loudspeakers are intended primarily for stand mounting, though they can be mounted on wall brackets or even on sturdy
shelves. The quality of loudspeaker stands greatly influences the performance of your loudspeakers, please do not use flimsy products.
Centre Channel Loudspeakers
Each of the Centre speakers is fixed with a set of rubber feet.The port tube and rubber feet of the Centre speaker are all at the bottom,Non blocking
lead port tube when adjusting.It is especially useful that the smoothness of the port tube is directly affected by the sound effect of the centre channel.
Cables and Connectors
Choosing Loudspeaker Cable
Specialist audio cable usually offers better performance than general purpose 'bell' or 'zip' wire .
Choose a cable of suitable diameter -cable that is too thin will limit the dynamics of the sound and may impair the bass response . Audio cable
is polarised, with two cores of different colours, or often a raised rib or coloured tracer in the case of twin cable. Before you purchase your cable,
give careful thought to the positioning of your loudspeakers.
This is especially the case if you are bi-wiring your loudspeakers.
Cable lengths to loudspeaker pairs should be the same for left and right channels in order to equalise the signal
transmission. Allow some slack in your speaker cables so you can alter their position to best advantage.
Preparing Loudspeaker Cable
Split the twin cores to a depth of about 40mm . Carefully strip the insulation from each end, leaving about 10mm of
bare wire. If the cable is stranded, lightly twist to gather any loose strands.
Connecting Screw Terminals
All loudspeakers use screw terminals.
Unscrew the terminal. Insert the bare end of the cable into the hole in the base of the terminal. Tighten securely.
When connecting terminals make sure you leave no strands of bare wire that can short across to adjacent terminals.
As an alternative to bare wire you can use specialist spade connectors. Your Wharfedale dealer will be pleased to
advise you on this issue.
Crossover Networks
Bi-Wireable Networks
Most speakers in the D300 floorspeaker use a special bi-wireable crossover panel with four terminal
binding posts. Please follow the drawing carefully to see the correct orientation of the loudspeaker
terminals.The upper terminals connect to the treble unit, the lower pair to the bass unit. As supplied, the
treble terminal pairis connected to the bass terminal pair via removable metal straps.These should be left in
place for standard installations.
Why Bi-Wire?
Using separate cables for treble and bass units in a bi-wiring configuration reduces intermodulation effects
and improves headroom and clarity. To bi-wire, you will need to install two lengths of twin core cable
between the amplifier and each loudspeaker .
Standard Networks
The D310, D320 compact monitor, the D300C
compact centre Channel speaker D300SR compact surround channel speaker
None of the above loudspeakers are bi-wireable as smaller loudspeakers
derive no particular advantages from bi-wiring.
D310, D320, D300C
0 0
+
0
0
0 0
D300SR
1

2
Positioning the Front Loudspeakers
The 0330, 0340 and 0350 models are designed to be floor standing. We suggest that they are positioned at least 200mm from the rear walls and
700mm from the side walls, facing slightly inwards. The 0310 and 0320 models should be stand or wall mounted though they may be placed on
a rigid shelf. The bass extension will improve if the small speakers are operated closer to the rear wall.
If the loudspeakers are placed too close to the walls the bass will increase but may be boomy and indistinct. If the loudspeakers are placed away
from the walls, the inward angle may be increased by up to 40%, although this may restrict the width of the optimum listening position.
A useful rule of thumb is that the listener should be as for from the loudspeakers as they are from each other. The speakers should ideally be
positioned so that the treble units are roughly at ear level to s seated listener. As personal taste plays a large role, experiment with different
configurations and play a wide range of programmes before finalising the position of your speakers.
2-4 metres
/
\
>50mm
D330-D350
>200mm
Positioning the Centre Loudspeaker
The centre channel loudspeaker should be positioned centrally between the loudspeakers, close to
the television and mounted above or below the screen.
The loudspeaker should be located on a stable flat surface to avoid any cabinet movement at high
sound levels. If you mount the unit above the television, move it forward so that the front grille sits
slightly in front of the screen and the top of the cabinet.
A custom stand is available for the model which allows the loudspeaker to be positioned under a
wall mounted monitor and has an adjustable vertical tilt for optimal dispersion .
Positioning Surround Loudspeakers
D300SR Surround Loudspeakers
The speakers should ideally be sited 600 mm-1.5 metres above the listening position and 2.5-3.5 metres
apart, central to the listener and behind the listening position, preferably on a rear wall. If the listening
position is some distance from a rear wall, the speakers may be mounted on opposite side walls but
always behind the listening position.
Ensure that the wall is sound and can support the product. Drill two 5mm holes in the wall 180mm
apart.
Fix a suitable No 8 round head screw firmly into each hole using appropriate wall plugs . Leave a stub of
5mm protruding from the wall.
Connect the loudspeakers . Align the holes in the mounting brackets over the screw and carefully lower
the unit onto the screws .The speaker should now be securely attached with the spacers resting against
the wall. Now connect the speakers to the amplifier.

Connecting the Front Loudspeakers
Standard Connection
Choose a suitable length of twin core speaker cable for each
channel, and prepare the ends . Unscrew each terminal a few turns .
Connect the red, positive (+) terminal of the Left loudspeaker to
the corresponding red, positive (+) amplifier terminal. Connect
the black, negative(-) terminals similarly. Tighten the terminals
securely. Repeat this procedure for the Right channel.
Bi-Wiring
Unscrew each terminal a few turns and remove the metal
straps. Connect the cables between the amplifier and the
loudspeakers as indicated above and re-tighten all the
terminals securely.
Bi-Amping
By connecting each loudspeaker drive unit to its own
dedicated amplifier the advantages of bi-wiring can be
extended.
IF you own two indentical stereo power amplifiers, your
speakers may be bi-amped . For further details please consult
your dealer.
0 0
+
C
0 0
RIGHT SPEAKER
RIGHT SPEAKER
AMPLIFIER
R.SPKR L.SPKR
e + +
Bl-WIRED CONNECTION
0 0
+
0
0 0
LEFT SPEAKER
LEFT SPEAKER
3

4
Connecting Centre Loudspeaker
The Centre channel speaker may be connected as shown, or bi-wired.
RI
CENTRE
RIGHT
Setting Up a Home Theatre System
Placement
0 0
◊ ◊ @
• • SUB
RIGHT LEFT WOOFER
FRONT
LEFT
Front and Effects Channels: The front loud speakers are placed on either side of the television screen, 2 to 3 metres apart . The speakers should
be angled slightly so they car aimed towards the listeners.
We recommend placing the rear effects speakers in a high position, behind the listener's head . If the rear or side walls are a long way from the
listening seat, cons ider stand mounting the loudspeaker s. If the centre loudspeaker is very high or low, angle it towards the li stener 's ear level.
The front faces of the centre and surround loudspeakers should also be in line as far as possible.
Subwoofer: As the ear is unable to detect the direction from which deep bass originates, you have freedom to position the unit . Varying the
distance from the wall alters the bass. Placing the subwoofer across a corner boosts the bass but may impair clarity. The performance of a home
theatre s ystem can be enhanced by using two subwoofer s.
6.1 and 7.1 System Placement
Dolby Labs, DTS and THX offer 6.1 and 7.1 format. Although
the precise configuration of these systems will depend on the
capabilities of your processor and you should be guided by those
instructions, we would make some observation.
For 6.1 and 7.1 formats the listening seat should not be too close to
the rear wall.
Optimising the time delay so that information from all speakers
arrives the listening seat coherently is critical of the benefits of these
systems are to be fully realised.
Dolby Labs Recommended Placement for Multichannel Home
Theater Systems
Left Front I
-
Left Back
'
\
\ \
\\
\ \ \
Centre I
LFE 11 Right Front
I~
20
30°
Right Surround
J
·-
1- 10
(Single Back channel for 6.1)

Setting Loudspeaker Sizes and Levels
If you are not using a subwoofer: Set the Front speakers to 'Large' . Set the 'Subwoofer' option on the processor to 'Off' or 'No' . The Front
channels will now receive all the system bass.
If you are using a subwoofer : When set to 'Small' all the s ystem bass will go into the subwoofer. If you choose 'Large' the Front channel bass will
be reproduced from the Front speakers . Follow the instructions on this page for suitable size and crossover settings.
Once the loudspeaker settings hav e be en finalised, put the A/V amplifier into its 'Test' mode (see instructions supplied with your processor).
Adjust the level of each channel until all channels are reproduced at equal loudness.
On some programme material the surround channel may seem lower than the front. Do not readjust this level. You may, however, need to adjust
the subwoofer output level. Avoid setting too high a level or you will swamp the sound with bass. This can be tiring to listen to, and may limit
the subwoofer's ability to respond to large bass transients. You should also set a sensible level going into the subwoofer from the A/V processor.
The subwoofer volume control should be between 12 o'clock and 3 o'clock.
Delay and LFE Settings
Many A/V processor feature delay settings. The purpose of delay is to enable surround and dialogue information to arrive at the listener's ears at
the same time as the front channels, even when the li s tening s eat is in a non-ideal position. On some processors, this can be achieved by setting
the distance from the listening position to each speaker, but other s ystem allow only a time delay setting.
Rear Delay: If the listening position is equidistant from the front and rear speakers, set a low delay setting. The closer the listener is to the rear
speakers this higher the delay setting used should be.
Centre Delay: If the centre speaker is level with (or slightly behind) the front speakers, set the delay to zero. If the centre speaker is forward of
the front speakers, increase the delay.
LFE: In the cinema the low frequency effects channel is an extra ba ss channel with its own subwoofer. In domestic sy s tems the LFE channel
typically feeds into the subwoofer . Where no subwoofer is used , the LFE signal is combined with the front channel s and sent to the front
speakers . When you set the LFE level at your A/V processor, use care as powerful low frequencies can overload domestic loudspeakers . If you
hear popping or thumping noises coming from the front loudspeakers or subwoofer, immediately turn the A/V processor's volume level down
and then lower the LFE level. This should cure the problem . If it does not, lower the volume level at the subwoofer (if you are using one) until
the problem disappears .
Phase:Please read the relevant sections of your A/V amplifier manual and familiarise yourself with the various issues. If you are unsure, consult
your dealer for help . A home theatre system should have a precise front stage, a diffuse rear stage and good localization of dialogue. If the
colours on the loudspeaker terminals do not correspond with those on the amplifier, the sound will appear poorly focused or 'out of phase' . For
this reason it is essential that the speakers are connected according to the wiring diagrams in this manual.
Connecting loudspeakers correctly (in phase) is essential whether the system is stereo or multichannel. This is especially important if you are bi-
wiring- if only one element in a bi-wired system is incorrectly connected (out of phase), the effects can be very noticeable yet hard to pinpoint .
Troubleshooting
Before investigating a problem, always switch off the system at mains.
If your system is not working properly please work through this checklist before returning the unit to your dealer .
Symptom Possible Cause
No Sound System not s witched on; Speaker cables sho rting terminals out; Wrong s ource selected
Sound lacks ba ss co ntent Subwoofer not switch ed on
Lack of bass reproduction Subwoofer phase incorrect; Subwoofer crossover control too low
Excessive bass distortion
at low volum es Subwoof er set to high; LFE level set too high; Subwoofer incorr ectly wir ed
Excessive
or distorted bass at high levels System level s et too high; Bass control set too high; Subwoofer t oo cl os e to room corners
Dis
tort ed / rattling sound at high levels System level s et too high; Objects too clo se to subw oofer
Popping or thumping from the subwoofer System level s et too high; Subwoofer level set too high; LFE level set too high
5

6
Looking After Your Loudspeaker
Your loudspeakers use special hardwearing sealed finish. They should not be waxed or treated with spray polishes which will smear and
dim the finish. Occasionally polish them with a dry or barely moist cloth to remove dust and finger marks, etc.
If you play the speakers with the grilles off exercise great care. NEVER operate speakers with the grilles off if there are children or pets in
the house .
Occasionally,
remove the loudspeaker grilles and brush them gently with a soft brush before replacing them carefully.
NEVER use a vacuum cleaner to clean loudspeaker grilles.
NEVER stand objects on your loudspeakers. In particular do not stand flowers etc. on them -they are not jardinieres!
Avoid getting
any liquid behind the grille. If you spill liquid on your loudspeakers, take them to your dealer for attention before using them
again .
DO NOT open the speakers, there are no user serviceable parts inside .
NEVER touch the drive units either with an object or your hands .
Quality Assurance
Your loudspeakers have been constructed to the highest standards. From top grade furniture construction and finish to carefully designed and
selected acoustic components, Wharfedale speakers are built to provide a lifetime of sonic pleasure. We hope you will derive many years of
good service from our products.
Servicing
In the unlikely event that your unit develops a fault you should return it to your Wharfedale dealer using the original packing to ensure safe
shipping.
The terms of your guarantee may vary in different countries. However, in all cases the guarantee excludes:
Liability for damage or loss occurring in transit to or from the purchaser.
All
damage caused through accident, misuse, wear and tear, neglect, incorrect installation, adjustment or repair by unauthorised personnel.
Wharfedale will
not be liable for any consequential damage, loss or injury, arising from or in conjunction with this equipment.
Service Centre Address
For technical support, servicing or product queries and information please contact either your local retailer or the office below.
UK
IAG Service Dept .
13/14 Glebe Road
Huntingdon
Cambridgeshire
PE29 7DL
UK
Tel: [phone]
Fax: [phone]
For information
on other authorised service centres worldwide contact Wharfedale International, UK.
A
world wide distributors list is available on the Wharfedale website: www.wharfedale.co. uk

Specifications
Mod el D310 D320
Generaldescription __________________________________ 2-way bookshelfspeaker ____________________________________ 2-waybookshelfspeaker__________________________ _
Design philosophy and core technology _______________________________________________________________________________________________________________________ _
Enclosure type
-------------------------------------- ~ :: ~ ':' ------------------------------------------------ ~: : ~ ':' _____________________________________ _
Transducer compleinent ______________________________ 2-way __________________________________________________ 2- way ________________________________________ _
ABR
Bass driver 4"(100mm) Black Woven Kevlar Cone 5"(130mm) Black Woven Kevlar Cone
------------------------------------------------------------------------------------------------------------------------------------------------------
Mid r ange drive r
------------------------------------------------------------------------------------------------------------------------------------------------------
Treble driver 1"(25rnrn) SoftDome 1"(25rnrn) Soft Dome
------------------------------------------------------------------------------------------------------------------------------------------------------
Full -r ange driver
------------------------------------------------------------------------------------------------------------------------------------------------------
AV shield No No
Sensitivity
(2.83V @lm) 86dB 87dB
------------------------------------------------------------------------------------------------------------------------------------------------------
RecornrnendedampliJierpower_________________________ ?fJ.!l?..V'! __________________________________________________ 2:5::~~_V'! ______________________________________ _
Peak powerhandling
------------------------------------------------------------------------------------------------------------------------------------------------------
PeakSPL 86dB 95dB
Nominal impedance 40 (Compatible 80) 40 (Compatible 80)
------------------------------------------------------------------------------------------------------------------------------------------------------
Minimum impedance _________________________________3f~:- ___________________________________________________ 3~8:3_________________________________________ _
Frequency response (
+/ - 3dB) 65Hz-20kHz 56Hz -20kHz
------------------------------------------------------------------------------------------------------------------------------------------------------
Bass extension (-6dB) 60Hz SOHz
Crossover frequency 2.2k Hz 2.4kHz
------------------------------------------------------------------------------------------------------------------------------------------------------
Cabinet Volume (in litres) 4.3L 8. 2L
Dimensions(mm)
------------------------------------------------------------------------------------------------------------------------------------------------------
Height(onplinth) 265mm (3!D+-10)mm
------------------------------------------------------------------------------------------------------------------------------------------------------
Width 155mm
180mm
Depth (with terminals) ( 200+28)mm (25()+.28)mm
------------------------------------------------------------------------------------------------------------------------------------------------------
Carton size 425'280"360mm 490'345'425rnrn
Net weight 4.0kg/pcs 6.0kg/pcs
------------------------------------------------------------------------------------------------------------------------------------------------------
Gross weight 9.2kg/ctn !3.4kg/ctn
------------------------------------------------------------------------------------------------------------------------------------------------------
7

Spec i fications
Model
D330 D340 D350
General description __________________
-- ~-~~!_ ~C>C>':'t_"_"~ - ~~~~e! _______________ !::~~ ~~:-'!~~~? _5!'~e_r_______________________ 3-way floorstanding speaker __________ _
Designphilosophyandcoretedmology
------------------------------------------------------------------------------------------------------------------------
Enclosuretype ----------------------- ~~~:=-: ------------------------------ ~ - ~e~~ ------------------------------------- 1:~!~~~~ -------------------------
Transducercontpleinent _______________ 2.5-way _______________________________ 3-way _______________________________________ 3-way ___________________________ _
ABR
Bass driver 5"(130mm) Black Woven Kevlar Cone 6.5"(150mm) Black Woven Kevlar Conex2 8"(200mm) Black Woven Kevlar Conex2
------------------------------------------------------------------------------------------------------------------------------------------------------
Midrange driver 5"(130mm) Black Woven Kevlar Cone 4"(100mm) Black Woven Kevlar Cone 4"(100mm) Black Woven Kevlar Cone
------------------------------------------------------------------------------------------------------------------------------------------------------
Treble driver 1"(25mm) Soft Dome 1"(25mm) Soft Dome 1"(25mm) Soft Dome
Full-range driver
------------------------------------------------------------------------------------------------------------------------------------------------------
AV shield No No No
Sensitivity
(2.83V @lrn) 88dB 90dB 90dB
------------------------------------------------------------------------------------------------------------------------------------------------------
Recommendedarnplifierpower___________ 25_:::0 _~ ------------------------------- ~ -1::>~ -------------------------------------- 2~ :2_ ~~ ---------------------------
Peak powerhandling
------------------------------------------------------------------------------------------------------------------------------------------------------
Peak SPL lOOdB 102dB 112dB
Nominal impedance
40 (Compatible 80) 40 60
------------------------------------------------------------------------------------------------------------------------------------------------------
Minimum impedance 4.10 3.80 40
------------------------------------------------------------------------------------------------------------------------------------------------------
Frequency response (+/-3dB) 40Hz -20kHz 38Hz -20kHz 35Hz -20k.Hz
------------------------------------------------------------------------------------------------------------------------------------------------------
Bass extension (-6dB)
371-lz 35Hz 30Hz
Crossover frequency 3.2kHz 630Hz & 3kHz 470Hz & 2.9kHz
------------------------------------------------------------------------------------------------------------------------------------------------------
Cabinet Volume (in litres) 34.7L Mid internal 12.0L/ Bass internal 32.SL Mid internal 10.SL / Bass internal 61.0L
Dimensions(mm)
------------------------------------------------------------------------------------------------------------------------------------------------------
Height (on plinth) (940+-25)mm (1()()()+.25)mm (110D+25)mm
------------------------------------------------------------------------------------------------------------------------------------------------------
Width 200mm 200mm 250mm
Depth (with terminals)
(31D+28)mm (370t-38)mm (400+38)mm
------------------------------------------------------------------------------------------------------------------------------------------------------
Carton siz.e 425"310'1090mm 505"330"1140mm 530"380"1280mm
Net weight 18.2kgipcs
25 .5kgipcs 32.Skg/pcs
------------------------------------------------------------------------------------------------------------------------ --- ---------------------------
Gross weight 19.5/kg/ctn 27.4kg/ctn 34.Skg/ctn
8

Specificat i ons
Model D300C D300SR
General description
____________________________ 2-way centre speaker __________________________________________ 2-way surround speak.er ____________________________ _
Designphilosophyandcoretechnology ------------------------------------------------------------------------------------------------------------------------
Enclosure type _______________________________ ~~~ ::~:x ____________________________________________ _______ closed-box system ________________________________ _
Transducer compleinent ________________________ 2-way ______________________________________________________ 2-way ___________________________________________
ABR
Bass driver 5"(130mm) Black Woven Kevlar Cone x 2 5"(130mm) Black Woven Kevlar Cone x2
------------------------------------------------------------------------------------------------------------------------------------------------------
Midrange driver -----------------------------------------------------------------------------------------------------------------------------------------
Treble driver 1"(25mm) Soft Dome 1"(25mm) Soft Domex2
Full-range driver -----------------------------------------------------------------------------------------------------------------------------------------
AV shield
no No
Sensitivity
(2.83V@ Im) 89dB 88dB
------------------------------------------------------------------------------------------------------------------------------------------------------
Recommendedampli!ierpower___________________ _:1~:1_2?~ ---------------------------------------------------- :~-!~~~ -----------------------------------------
Peak powerhandling
------------------------------------------------------------------------------------------------------------------------------------------------------
Peak SPL 95dB 98dB
Nominal impedance
40 (Compatible 80) 80 Compatible
------------------------------------------------------------------------------------------------------------------------------------------------------
Minimumimpedance __________________________}:8_ f: _______________________________________________________~-~~ ---------------------------------------------
Frequency response ( +/ -3dB) 65Hz -20kHz 105Hz -24kHz
------------------------------------------------------------------------------------------------------------------------------------------------------
Bass extension (-6dB) 55Hz 90Hz
------------------------------------------------------------------------------------------------------------------------------------------------------
Crossover frequency 2.SkHz 3.0kHz
------------------------------------------------------------------------------------------------------------------------------------------------------
Cabinet Volume (in litres) 10.7L 7.2L
------------------------------------------------------------------------------------------------------------------------------------------------------
Dimensions(mm)
------------------------------------------------------------------------------------------------------------------------------------------------------
Height (on plinth) (180 +lO)mm 310mm
------------------------------------------------------------------------------------------------------------------------------------------------------
Width 510mm 360mm
Depth (with terminals)
(200 +32)mm (IBO+S)mm
------------------------------------------------------------------------------------------------------------------------------------------------------
Carton size
290'270'605mm 450'450'440mm
Net weight 8.0kg/pcs 8.Skg/pcs
------------------------------------------------------------------------------------------------------------------------------------------------------
Gross weight 9.2kg/ctn 18.Skg/ctn
------------------------------------------------------------------------------------------------------------------------------------------------------
9

[illWHARFEDALE
IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK
Tel : [phone] Fax: [phone] http://www.wharfedale.co.uk
IAG reserves the right to alterthe design and specificationswithout notice.All rights reserved© IAG Group Ltd .
Wharfedale is a member of the InternationalAudio Group. CODE: WH14-MNL005a