Wharfedale Pro Typhon Series User manual

WWW.WHARFEDALEPRO.COM
POWERFUL | PORTABLE | VERSATILE PA
TYPHON-AX12
TYPHON-AX12-BT
Wharfedale Pro Typhon Series User Manual

1
1. IMPORTANT SAFETY INSTRUCTIONS

2
2. TYPHON - Pronounced - “TYF—ON”
In ancient mythology, Typhon was a giant who brought fear to his enemies. From a similar era
to the Titans, it is said that the God Typhon had the power to create and control massive wind
tornadoes in his battles. Mythology also often refers to him as being invincible.
Power, control and “invincibility” are all features which Typhon active loudspeakers
have been designed around.
Two models are available. Typhon-AX12 - a 12” 2-way 720w Continuous active loud-
speaker and an aptX Bluetooth enabled brother - the Typhon-AX12-BT.
A polypropylene cabinet design with a full frontal steel grille houses the most advanced
active loudspeaker ever created by Wharfedale Pro. This injection moulded cabinet is
carefully engineered to feature 5 carry handles making transportation easy and well
balanced.
Advanced internal DSP algorithms generate a sound stage which surpasses the dimen-
sions of the cabinet. The two separate Class D power amps (600w RMS for the LF and
120w RMS for the HF) deliver huge output power while keeping the overall weight to
minimum. The efficiency of the amplifier stage means that Typhon uses convection
cooling - resulting in a more reliable product with quieter operation.
Custom Wharfedale Pro transducers have been selected for Typhon. The custom com-
pression driver features a 1.75” voice coil. This is coupled to a 100° x 80° waveguide for
smooth HF dispersion. The custom Wharfedale Pro 12” LF transducer has a newly
designed ferrite core, uses flat coil windings to aid cooling, and features a moisture
rejecting cone material which allows Typhon to be used in damp or humid conditions.
The Typhon-AX12-BT features aptX Bluetooth input connectivity and stereo linking
which makes setup with mobile devices simple and cable free.
Features
• 720w continuous (1440w peak)
• Full frontal steel grilles with inner cloth protection
• Top and bottom practical handles
• Bluetooth model available - Typhon-AX12-BT
• Bi-amplified with Class D amps
• 4 position DSP
• 9 x M8 rigging points
• 2.5” LF transducer voice coil with flat windings
• 1.75” HF compression driver voice coil
• 100° x 80° dispersion Hybrid Symmetry waveguide

3
3. IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THESE
SPEAKERS UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT
LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST
BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT
REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE.
1. READ ALL INSTRUCTIONS – carefully and become familiar with the features and
func tions of these products before operating them.
2. RETAIN THESE INSTRUCTIONS – for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product
should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other
equipment, it is advisable to establish and follow a routine for powering up and
powering down a sound system. With all system components connected, turn
on source equipment (mixers, signal processors, record and playback units, etc.)
BEFORE powering up amplifiers. Transient voltages from powering up source
equipment can damage speakers if amplifiers are already turned on. Make sure
that amplifier volumes are set to their minimum settings and power up any
system amplifiers LAST. It is recommended that all system components be
allowed to stabilize for several seconds before any source signals are
introduced or level setting adjustments are made. Similarly, when shutting
systems down, turn all amplifiers off first, before powering down any other
system components.
5. CABLES – Do not use shielded or microphone cables for connection between
amplifiers and speakers. Use only approved speaker cables with proper
connectors.
6. CAUTION – These professional loudspeaker systems are capable of generating
very high sound pressure levels. Use care with placement and operation to
avoid exposure to excessive volume levels. Permanent hearing damage can
result when operated to extreme levels.
7. SERVICE – There are no user serviceable parts inside this product. Users should
not attempt to service this product. Warranty nullification could result if this is
attempted.
8. RIGGING - SUSPENDING - MOUNTING - Rigging suspending or mounting of
speaker systems can expose members of the public to serious health risks and
even death.

4
4. Typhon-AX12 / Typhon-AX12-BT REAR PANEL FEATURES

5

6
1. VOLUME controls for INPUT A and INPUT B:
These knobs control the level of each input channel.
2. DSP setting : (4 modes)
1) FLAT
2) MONITOR
3) BASS
4) PUNCH
3. DSP Selection
With each tap of the D-EQ button, the DSP will step through each of the 4 above
DSP modes. The LED will show which DSP mode is currently active.
4. Bluetooth operation (Typhon-AX12-BT only) :
a. MONO Mode:
Press and release the PAIR button on one speaker only.
Select “Wharfedale Pro BT” on your device. The BT LED will change to solid when
paired.
To disconnect, press and release the PAIR button.
b. STEREO Link Mode: - For use with 2 units of Typhon-AX12-BT
Press and hold the PAIR button on each speaker until the ST LED is blinking. The
ST LED will change to solid when Linked.
Press and release the PAIR button on one speaker. Then select “Wharfedale PRO
BT” on your device. The BT LED will change to solid when paired. The selected
speaker will be the left channel.
To disconnect, press and hold the PAIR button for 5 Seconds.
Transmission distance note : A single speaker working range is about 15 meters
(Bluetooth device (eg Phone) to single speaker). When using Typhon-AX12-BT in
stereo link mode the working range is about 10m (Bluetooth device (eg Phone)
to speaker). In this mode the linked speakers can be up to 8m apart.
Phone
Bluetooth device
Typhon-AX12-BT
15m
Phone
Bluetooth device
Typhon-AX12-BT Typhon-AX12-BT
10m 10m
8m

7
5. GAIN selection switch A: This switch selects the proper gain structure for INPUT
A. If a microphone is connected to INPUT A, use mic mode (up). If the signal
source is anything other than a microphone (eg an analogue playback device,
keyboard or mixer output) use the line selection (down).
6. GAIN selection switch B: This switch selects the proper gain structure for INPUT
B. If a Bluetooth device is connected to INPUT B, use BT mode (up). If the signal
source is anything other than a Bluetooth device (eg analogue playback device,
keyboard or mixer output) use the line selection (down).
7. 90Hz Hi Pass Filter switch:
Used to reduce bass buildup due to half space loading. This is especially useful
when using the Typhon on the floor as a floor monitor.
8. Power “ON” indicator LED and LIMIT indicator LED: The bracketed LED to the
left of the POWER switch illuminates when the power switch is in the ‘ON’ posi
tion. The LIMIT LED illuminates when the signal limiter is limiting the level of the
signal. This process prevents distortion and overload.
9. Horn LED defeat switch: Switches off the front horn power LED for discrete
applications.
10. POWER ON / OFF switch: This switch turns the power on and off.
11. Output source “LOOP / MIX” switch: In the “LOOP” mode, this switch routes the
signal of INPUT B to the line level XLR OUTPUT jack, bypassing the EQ section
and volume control. When in the MIX mode, this switch routes the combined (or
“mixed”) signals of both INPUT A and INPUT B to the line level XLR OUTPUT jack.
12. XLR and ¼” input jacks for INPUT A and INPUT B.: These connectors allow XLR
or ¼” balanced input connections to INPUT A and INPUT B
13. XLR line level OUTPUT: This connector provides a balanced line level output for
connection to additional active loudspeakers (such as another Typhon-AX12),
powered subwoofers or external amplifiers.
14. POWER cord input: Typhon uses a standard IEC, three prong, grounded AC elec
trical connection. Be sure that you are plugging into the correct source voltage
that matches what is indicated just below the power cord jack.

8
5. TECHNICAL DRAWINGS

9
6. SPECIFICATIONS
Model Name
System Type
Frequency Response (+/-3dB)
Frequency Range (- 10 dB)
Maximum SPL(peak)(@1m)
Sensitivity @ 1W / 1m)
Low Frequency Transducer
Size (mm / inches)
Voice Coil Size (mm / inches)
Rated Impedance
High Frequency Transducer
HF Driver Type
Coil Size (mm / inches)
Exit Size (mm / inches)
Diaphragm Material
Rated Impedance
Nominal Coverage (H x V)
Amplifiers
Amplifier Design
Power Rating:
DSP Controls---D-EQ
Amplifier Protection
Power On Protection
Thermal Protection
Low Line Voltage Shut Down
Driver Protection
DC Protection
Short Protection
Clip Limiter
Limiter Indicator
Power Indicator
Inputs
Input A – type
Input Sensitivity
Maximum Input Level
Input Connectors A / B
Input Impedance
Line Output
Line Output Connector
Loop Gain
AC Power details
Power Supply
Rigging / Bracket / Mounting Options
Handles
Enclosure
Enclosure Material and finish
Colour Options
Grille Material & Finish
Dimensions - Unpacked (mm / inches):
Height
Width Front
Width Rear
Depth
Dimensions - Packed (mm / inches):
Height
Width Front
Width Rear
Depth
Net Weight (kg / lbs)
Gross Weight (kg / lbs)
Typhon-AX12
Active 12" 2-way
55Hz-20kHz
50Hz-20kHz
129dB
98dB
305mm / 12"
65mm / 2.5”
4Ω
Compression Driver
44mm/1.75"
25mm/1"
Titanium
8Ω
Hybrid Symmetry Horn 100° x 80°
Class D
1440W Peak (1200W LF +
240W HF), 720W Continuous
(600W LF + 120W HF)
FLAT/MONITOR/BASS/PUNCH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Balanced
775mV (0dBu)
4V
2*XLR, 2*6.3mm jack
20K ohms
Balanced XLR
0dB
220~240VAC/100~120VAC 50/60Hz
9 x M8 threaded inserts
35mm pole socket with lock screw
Optional WPB-2 wall-mount bracket
5 carry handles
Injection Moulded Polypropylene
Black paint
Full front steel
558mm / 22.0"
344mm / 13.6"
245mm / 9.6"
340mm / 13.4"
645mm / 25.4"
425mm / 16.7"
425mm / 16.7"
419mm / 16.5"
16.2kg / 35.64lbs
19.2kg / 42.24lbs
Typhon-AX12-BT
Active 12" 2-way
55Hz-20kHz
50Hz-20kHz
129dB
98dB
305mm / 12"
65mm / 2.5”
4Ω
Compression Driver
44mm/1.75"
25mm/1"
Titanium
8Ω
Hybrid Symmetry Horn 100° x 80°
Class D
1440W Peak (1200W LF +
240W HF), 720W Continuous
(600W LF + 120W HF)
FLAT/MONITOR/BASS/PUNCH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Balanced/Bluetooth(aptX,with link Stereo)
775mV (0dBu)
4V
2*XLR, 2*6.3mm jack
20K ohms
Balanced XLR
0dB
220~240VAC/100~120VAC 50/60Hz
9 x M8 threaded inserts
35mm pole socket with lock screw
Optional WPB-2 wall-mount bracket
5 carry handles
Injection Moulded Polypropylene
Black paint
Full front steel
558mm / 22.0"
344mm / 13.6"
245mm / 9.6"
340mm / 13.4"
645mm / 25.4"
425mm / 16.7"
425mm / 16.7"
419mm / 16.5"
16.2kg / 35.64lbs
19.2kg / 42.24lbs

2018