Conquer Industry CQL1679-B User manual

CQL1679-B Bluetooth Speaker with LED Clock
Instruction Manual (Read before proceeding)
Power:
Please charge your Bluetooth speaker fully before its first use.
To charge the battery:
Using a Micro USB Charging Cable (included), insert the USB power cable into the
micro USB port located at the back of the speaker. Connect the other end of the USB
cord into a powered USB source such as a computer, laptop or USBAC adapter.
When your Bluetooth speaker is charging, the indicator light will turn red.
Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located at the back of the
speaker to middle or “ON” position. The Bluetooth indicator light will start flashing
blue quickly.
Make sure the Bluetooth function on your device is turned on.
Search the speaker named,”SB-01”.
Once you have selected the speaker, your device will pair without a password. (If your
device prompts for a password, enter the password”0000”.)
Once your speaker is paired, the blue indicator light will begin to flash slowly.
Start playing music on your device. Make sure that you keep your device within a 33
feet range of your Bluetooth speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Light Operation
Push the On Off button to the “On” position to turn on the unit, the light will light up
automatically.
Play music on your mobile device, the light will dance to the music.
Turn off the unit, the light will turn off accordingly.
Note: Switch the button to middle position will activate the Bluetooth function only, no
light. Push the button to ON postion will activate the Bluetooth and LED lights at the same

time.
Button Control for the LED Clock:
:
Snooze for 5MIN.
When the alarm starts, press this button to snooze for 5MINs and the alarm icon on
the LED will start blinking.After 5MINs, the alarm will start again and repeat this
process.
:
Press this button, the alarm icon on the LED will light up. Press it one more time, the
alarm icon on the LED will disappear.
When the alarm starts, press this button to stop the alarm, press it again to make sure
the alarm icon on the LED disappear so that the alarm is totally turned off.
:
Long press this button, the hour digit will start blinking (press the right bottom button
to change the digit)
Press it one time again, the minute digit will start blinking (press the right bottom
button to change the digit)
Press it one time again, the hour digit for the alarm time will start blinking (press
the right bottom button to change the digit)
Press it one time again, the minute digit for the alarm time will start blinking (press
the right bottom button to change the digit)

:
Press it to increase the digit from 01-12 for hour digit and increase the digit from
00-59 for minute digit. This button is can only increase the digit and cannot decrease
the digit.
The display for time and alarm isAM and PM.
Note:
****The Bluetooth indicator light in the front will turn off automatically if the
Bluetooth is not paired to the mobile phone for 5 MINS. To use the Bluetooth
function again, please turn Off and On the switch again.
****While you turn off the unit, the time has its memory as long as there is still
battery left of the speaker.
****If the speaker is with no battery inside at all, the time cannot memorize its track.
The users need to charge the unit and reset the time again.
Caution:
This is not a toy. Please keep away from children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not overcharge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.