Whip Mix GEMPRO PATIENT User manual

GEMPRO PATIENT INSTRUCTIONS
Physioplux App
Step 1: If using WIFI, please
connect to home WIFI.
Step 2: Plug tablet into
power outlet before
beginning test.
Step 3: Click on Physioplux
app on tablet, and login
with PIN (PIN is case
sensitive).
Step 4: Power on the pulse
oximeter and amplier (if
being used). If everything is
on and the tablet is plugged
in, all check marks on the
screen will be green and the
screen will automatically
advance to the next screen.
Step 5. Click YES or NO on
whether wearing some type
of mouth guard or therapy
like CPAP. Once you have
made your selection, the
screen will automatically
advance to the next screen.
If you are not using the
amplier (BioBrux), the
next two steps will not
appear; forward to Step 8.
Step 6: Clip the amplier
to your pajamas with the
arrow and wires pointing up.
Attach on EMG foam pad to
the amplier lead, remove
3
4
5
6

clear backing, and attach
foam pad to masseter
muscle. It is best if the
lead wires go back towards
your ear. To proceed, click
NEXT.
Step 7: Position the
amplier so the arrow is
pointing up as you wear it,
and up on the screen. When in correct position, you will see the word
“OK” on the screen. To proceed, click NEXT.
Step 8: Put the pulse
oximeter on your non-
dominant hand. Remove
dark ngernail polish if
necessary. Place the probe
on your index nger with
the wires on top of your
wrist. To proceed, click
NEXT.
If you are not using the amplier (BioBrux), the next two steps
will not appear; forward to Step 11.
Step 9: Click START
BIOCAL and follow the
directions on screen to
clench your teeth together
or relax. You will be asked
to clench 4 times.
The screen will
automatically advance when
nished.
Step 10: Calibrate the
audio by testing in room
where you sleep for 10
seconds by clicking on
START AUDIO TEST.
This screen will
automatically advance when
nished.
7
8
9
10

Step 11: Click START
TEST NOW. Screen will
automatically advance.
Step 12: Visual of screen
while testing.
• The battery charge for
amplier shows under the
EMG box.
• You can switch o the
green blinking light on the
amplier by sliding the
light bar beside the words
LED.
The light from the tablet will
remain on so gently close
the case to cover the light.
Click END TEST in the
morning when testing is complete.
DON’T STOP NOW –
THREE MORE STEPS
Step 13: Data in report
format. Click NEXT to
nish the study.
Step 14: Click FINISH to
end the study.
11
12
14
13

PN: 20012151
FN: 02GEMPROPAT-F AG R0818
Distributed by:
Whip Mix Corporation
Louisville, KY 40209
800-626-5651
502-637-1451
502-634-4512 (fax)
www.whipmix.com
Step 15: Final Message is a
reminder to turn o devices
and charge if necessary.
Once you click OK, the
tablet will return to the
home menu.
Step 16: Power tablet
down, return device to
dentist.
15