Whirlpool ACU072XE Product information sheet

HOW TO MAKE A HOME 3.”
InstallationInstructionsand
Use81CareGuide
THROUGH-THE-WALLAIRCONDITIONER
MODELS: ACU072XE, ACUl02XE,
ACUl14XE
PART NO. 23-1 l-1 186N-OOiY789600 Rev. A

Contents
Page
Important Safety Instructions ........................ 2
Electrical Requirements ................................. 3
Installation Instructions .................................. 7
Operating Instructions .................................. IO
Starting your air conditioner ........................ IO
The exhaust vent control ............................. 11
Changing air direction ................................. 11
Cleaning Instructions ................................... 12
Cleaning the front panel ............................... 12
Cleaning the slide-out air filter ...................... 13
Maintenance Instructions ............................. 14
Annual maintenance ..................................... 14
Energy saving tips ........................................ 15
Troubleshooting ............................................. 16
Requesting Assistance or Service ............... 17
Warranty ......................................................... 20
0 1995 Whirlpool Corporalion
Thank you for buying this appliance. Please
complete the form below. Have this information
ready if you need service or call with a question.
l Copy model and serial numbers from label (see
diagram below) and purchase date from
sales slip.
l Keep this book and sales slip together in a
handy place.
Model Number
Serial Number
Purchase Date
Service Company Phone Number
M
seria lodt
I met and lmber
label
mportantSafety
nstructions
To reduce the risk of fire, electrical
shock, or personal injury when using
your air conditioner, follow these basic
precautions:
l Read all instructions before using your
air conditioner.
l Complete the installation requirements
as described in “Installation Instruc-
tions” on pages 7-9.
l Never allow children to operate or play
with the air conditioner.
l Do not operate the air conditioner with
the front panel removed.
l Never clean air conditioner parts with
flammable fluids. The fumes can create
a fire hazard or explosion.
l FOR YOUR SAFETY l
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR
ANY OTHER APPLIANCE. THE FUMES
CAN CREATE A FIRE HAZARD OR
EXPLOSION.
It is your responsibility to be sure your air
conditioner:
l Is installed in a wall that will hold the
weight, and is secured according to the
installation instructions.
l Is connected only to the proper kind of
outlet, with the correct electrical supply and
grounding. (See “Electrical Requirements”
on pages 3-6.)
l Is the correct size for the area you want
to cool.
l Is used only for the job it was designed
to do.
l Is not used by children or anyone unable to
operate it properly.
l Is properly maintained.
Also, remove Energy Label and Buy Guide.
Use a damp cloth to take off any glue
residue. Do not use sharp instruments,
flammable fluids, or abrasive cleaners.
These can damage the material.
- SAVE THESE INSTRUCTIONS -

ElectricalRequirements
Below are electrical plug variations, choose the
one which matches the ampere rating of your
unit. Your model’s ampere rating is printed on the
model and serial number label, attached to the
unit, behind the front panel. (See diagram on
we 2.)
OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUNDING PRONG.
NOTE: If codes permit and a separate grounding
wire is used, it is recommended that a qualified
electrician determine that the grounding path is
adequate and not interrupted by plastic, non-
metallic gaskets or other insulating materials.
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
I
Electrical Shock Hazard
1 Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
I
Do not use air conditioner with front
panel removed.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
PLUG TYPE
I
3.prong
groufling plug
Power supply cord
ELECTRICAL REQUIREMENTS
115 volt models with amperes up
through 7.5
- 3.prong
grounding
type wall
receplacle
Power s”&~ly cord
For 115 volt models with amperes
from 7.6 to 12.0
I
‘K blade - Receptacle
I
tandem \-
blades Grounding
Prong
230/208 volt models with amperes
up through 12.0
SEE PAGE
4
5
6

Electrical Requirements
Continued
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
Electrical Shock Hazard
Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
Do not use air conditioner with front
panel removed.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
Sprang
groundlng
Plug
115volt modelswith amperes
-
upthrough7.5
Receptacle wiring
Receptacle wiring should be a minimum of
14 gauge. Use copper wire only. It is the
responsibility of the consumer to provide
proper and adequate receptacle wiring,
installed by a qualified electrician. Observe
National Electrical Code and all local governing
codes and ordinances.
Electrical requirements
A 115 volt (103.5 min., 126.5 max.), 60 Hz,
AC only, 15 ampere fused electrical supply is
required (time delay fuse or time delay circuit
breaker required). It is required that a separate
circuit, serving only this air conditioner, be
provided.
Electrical connection
Electrical ground is required on this air conditioner.
Recommended grounding method
For your personal safety, this air conditioner must
be grounded. This air conditioner is equipped
with a power supply cord having a 3-prong
grounding plug. To minimize possible shock
hazard, the cord must be plugged into a mating
3prong grounding-type wall receptacle,
grounded in accordance with the National
Electrical Code (ANSVNFPA 70 - latest edition)
and local codes and ordinances. If a mating wall
receptacle is not available, it is the responsibility
of the customer to have a properly grounded
3-prong wall receptacle installed by a qualified
electrician.
4

Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
Electrical Shock Hazard
Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
Do not use air conditioner with front
panel removed.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
3-prong
E;;;nding
115volt modelswith amperes
from7.6 through 12.0
Receptacle wiring
Receptacle wiring should be a minimum of
14 gauge. Use copper wire only. It is the
responsibility of the consumer to provide
proper and adequate receptacle wiring,
installed by a qualified electrician. Observe
National Electrical Code and all local governing
codes and ordinances.
Electrical requirements
A 115volt (103.5 min., 126.5 max.), 60 Hz,
AC only, 15 ampere fused electrical supply is
required (time delay fuse or time delay circuit
breaker required). It is required that a separate
circuit, serving only this air conditioner, be
provided.
3-prong
grounding
type wall
receptacle
(single
outlet)
Electrical connection
Electrical ground is required on this air conditioner.
Recommended grounding method
For your personal safety, this air conditioner must
be grounded. This air conditioner is equipped
with a power supply cord having a 3-prong
grounding plug. To minimize possible shock
hazard, the cord must be plugged into a mating
3-prong grounding-type wall receptacle,
grounded in accordance with the National
Electrical Code (ANSVNFPA 70 - latest edition)
and local codes and ordinances. If a mating wall
receptacle is not available, it is the responsibility
of the customer to have a properly grounded
3-prong wall receptacle installed by a qualified
electrician.
5

Electrical Requirements
Continued
1 ~;I;:::;;~~~~rd..
Domg so can result In death, fire, or ,
Electrical Shock Hazard
Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
Do not use air conditioner with front
panel removed.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
3-prong
grounding
type wall
receptacle
230/208volt modelswith
amperesupthrough12.0
Receptacle wiring
Receptacle wiring should be a minimum of
14 gauge. Use copper wire only. It is the
responsibility of the consumer to provide
proper and adequate receptacle wiring,
installed by a qualified electrician. Observe
National Electrical Code and all local governing
codes and ordinances.
Electrical requirements
A 230/208 volt (197.6 min., 253 max.), 60 Hz,
AC only, 15 ampere fused electrical supply is
required (time delay fuse or time delay circuit
breaker required). It is required that a separate
circuit, serving only this air conditioner, be
provided.
Electrical connection
Electrical ground is required on this air conditioner.
Recommended grounding method
For your personal safety, this air conditioner must
be grounded. This air conditioner is equipped
with a power supply cord having a 3-prong
grounding plug. To minimize possible shock
hazard, the cord must be plugged into a mating
3-prong grounding-type wall receptacle,
grounded in accordance with the National
Electrical Code (ANSVNFPA -/O-latest edition)
and local codes and ordinances. If a mating wall
receptacle is not available, it is the responsibility
of the customer to have a properly grounded
3-prong wall receptacle installed by a qualified
electrician.
6

Excessive Weight Hazard
Use two or more people to move and
install air conditioner.
Failure to do so can result in back or
other injury.
InstallationInstructions
This air conditioner has been designed for
installation through the wall, in a sleeve. It is the
responsibility and obligation of the customer to
have this product installed by a qualified techni-
cian familiar with through-the-wall installation.
OR
If you choose to install the air conditioner
yourself, read all installation instructions, as well
as the electrical requirements and operating
instructions, before installing your unit. This will
help to avoid any installation problems and will
help ensure trouble-free performance of your new
air conditioner.
Beforeinstalling your
air conditioner
Installation tips
l Inspect the condition of the wall where the air
conditioner will be installed. Be sure it will
support the weight of the unit.
l Watch out for the sharp metal fins on the front
and rear coils.
l Be sure your air conditioner does not fall during
installation.
l Do not install the air conditioner where the
plastic cabinet front will be exposed to a heat
source that raises the surface temperature
above 120°F.
Tools required
l Phillips screwdriver
Installing yourair conditioner
Installing in an old sleeve
1. Remove the rear grille from the sleeve and
replace it with the new grille.
2. The part number label on the grille should face
the inside of the room.
NOTE: If your sleeve is of another make, you
can purchase a sleeve and adapter kit designed
to adapt your sleeve to this air conditioner. An
accessory kit is also available for window installa-
tion. Both kits are available from your local dealer.
continued on next page

Installation Instructions
Continued
Installing in a new sleeve
1. Remove the front and back covers. Save
these for future use to seal the sleeve if the
air conditioner is removed.
2. Remove the rear grille from the sleeve.
3. Brush out all debris from inside the sleeve
making sure the inside is clean and that the
drain holes are completely clear.
4. Loosen screws in the rear grille to about W
Then, while holding on to the wire loop, tip the
grille and pass it through the rear opening of
the sleeve. The baffle contact area should be
on the left.
5. Align the grille to engage the screw heads
through the keyhole slots in the outer flanges
of the sleeve. Push downward until the screws
are positioned into the bottom of the keyhole
slots. Tighten all 4 screws, and unwind and
discard the wire loop.
6. Unpack the air conditioner according to
the carton instructions.

7. Remove the 2 screws from the outer edges
P of the top of the cabinet. Use these and the
additional 3 screws supplied to attach the top
trim frame.
P 6. Use 6 of the screws supplied to attach the left
and right vertical trim frames to the existing
holes in the cabinet.
al
9. Slide the air conditioner fully into the sleeve.
Center the air conditioner in the sleeve so
that all seals bear evenly to prevent leakage.
10. Use the 2 screws supplied to attach the
bottom trim frame to the existing holes in the
vertical trim frame.
I
L
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
Electrical Shock Hazard
Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
Do not use air conditioner with front
panel removed.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
11. Before inserting the plug into the power
supply, make sure the Fan Control is OFF.

OperatingInstructions
Flre Hazard
Do not use an extenslon cord.
Dolng so can result In death, fire, or
electrical shock.
Startingyourair conditioner
Electrical Shock Hazard
Plug Into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding clrcult.
Do not use alr condltloner wlth front
panel removed.
Failure to follow these lnstructlons can
result In death, electrlcal shock, or
serious Injury.
1. Set Exhaust Control to CLOSED for maxi-
mum cooling results.
2. Set Fan Control to the desired setting.
LOW COOL .......................... for sleeping comfort
HIGH COOL ........................ for maximum cooling
LOW and HIGH FAN ........ for circulating room air
when no cooling is desired
3. Turn the Thermostat Control to the desired
setting. You can adjust the air conditioner’s
cooling performance by turning the Thermo-
stat Control clockwise for more cooling or
counterclockwise for less cooling. You will
need to experiment to find the setting which
suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, wait at least 3 minutes before turning
it back on or you may blow a fuse or trip a circuit
breaker.
10