Whirlpool ACS072XE User manual

Installation,
UseAndCare
A Note To You ................2
Air Conditioner
..............................
Parts And Features ........4
Requirements ................. 5
Air Conditioner ............ 13
. Caring For Your
Air Conditioner ............ 15
Troubleshooting .......... 19
Warranty .......................24
I-800-253-1 301
Call Our Consumer Assistance
Center with questions or comments.
SLIDER/CASEMENT WINDOW AIR CONDITIONERS
PART NO. 23-1 l-l 187N-001/789601
MODELS ACS072XE ACSl02XE
‘A-YQ

A Note to You
Thank you for buying a WHIRLPOOL@ appliance.
Because your life is getting busier and more complicated, WHIRLPOOL Air Conditioners are
easy to use, save time, and help you manage your home better. To ensure you enjoy years of
trouble-free operation, we developed this Use and Care Guide. It contains valuable informa-
tion about how to operate and maintain your appliance properly and safely. Please read it
carefully. Also, please complete and mail the Ownership Registration Card provided with your
appliance. This card helps us notify you about any new information on your appliance.
Please record your model’s information.
Whenever you call to request service on
Model Number
your appliance, you need to know your
complete model number and serial number.
Serial Number
You can find this information on the model
Purchase Date
and serial number label (see diagram on
Dealer Name
page 4 for location of label).
Please also record the purchase date of
your appliance and your dealer’s name,
address, and telephone number.
Dealer Address
Dealer Phone
Keep this book and the sales slip together in a safe place for future reference.
I
Our Consumer Assistance Center
number is toll-free 24 hours a dav.
I-800-253-1 301 1

Air Conditioner Safety
warning symbols. Please pay special
attention to these symbols and follow any
instructions given. Here is a brief explana-
tion of the use of the warning symbol.
IMPORTANT SAFETY INSTRUCTIONS
l Read all instructions before using the
air conditioner.
.Complete the installation requirements
as described in the Installation
Instructions.
l Do not operate the air conditioner with
the front panel removed.
*Never clean air conditioner parts with
l FOR YOUR SAFETY l
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR
ANY OTHER APPLIANCE. THE FUMES
CAN CREATE A FIRE HAZARD OR
EXPLOSION.
flammable fluids. The fumes can create
an explosion or fire hazard.
- SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l Install your air conditioner in a window that
will hold the weight, and secure the air
conditioner according to the Installation
Instructions.
l Connect the air conditioner to the proper
kind of outlet with the correct electrical
supply and grounding. (See the Installation
Instructions.)
l Make sure the air conditioner is the correct
size for the area you want to cool.
l Use the air conditioner only to do what a
window air conditioner is designed to do.
l Make sure the air conditioner is not used
by anyone unable to operate it properly.
l Maintain the air conditioner properly.
Also, remove the Energy Label. Use a damp
cloth to take off any glue residue. DO NOT
use sharp instruments, flammable fluids, or
abrasive cleaners. These can damage the
material.
3

Parts And Features
This section contains captioned illustrations of your appliance Use them to become familiar
with where all Parts and features are located and what they lobk like. To help you find
information on SPeCifiC parts or features quickly, page references are included.
Removable
air filter -
(behind Panel)
I
Model and serial
I
number plate
(behind air louvers)
Control panel
(PP. 73, 14)
Control Panel
&ha& vent
control I
Fan
control I
Thermostat
control
4

Electrical Requirements
Below are electrical plug variations; choose the one which matches the ampere rating of your
unit. Your model’s ampere rating is printed on the model and serial number label, attached to
the unit, behind the front panel. (See diagram on page 4.)
Observe all local codes and
ordinances.
Do not, under any circumstances,
remove the power supply cord
grounding prong.
NOTE: If codes permit and a separate
grounding wire is used, it is recommended
that a qualified electrician determine that the
grounding path is adequate and not inter-
rupted by plastic, non-metallic gaskets or
other insulating materials.
Check with a qualified electrician if you are
in doubt as to whether the air conditioner is
properly grounded.
Fire Hazard
Do not use an extension cord.
Doing so can cause death, fire, or
electrical shock
Electrical Shock Hazard
Plug appliance into a grounded
outlet.
Do not remove ground prong.
Do not ground to a pipe.
Do not fuse neutral or ground.
Failure to follow these instructions
can result in death or electrical
shock.
I

PLUG TYPE
Power supply cord
- Ctprong
grounding
lypa wall
NtfTPtaCl~
ELECTRICAL REQUIREMENTS
115 volt models with amperes
up through 7.5
For 115 volt models with amperes
from 7.6 to 12.0
115 volt models with amperes up
through 7.5
Receptacle wiring
Receptacle wiring should be a minimum of
14 gauge. Use copper wire only. It is the
responsibility of the consumer to provide
proper and adequate receptacle wiring,
installed by a qualified electrician. Observe
National Electrical Code and all local
governing codes and ordinances.
Electrical connection
Electrical ground is required on this air
conditioner.
Recommended grounding method
For your personal safety, this air conditioner
must be grounded. This air conditioner is
equipped with a power supply cord
having a 3-prong grounding plug. To mini-
mize possible shock hazard, the cord
must be plugged into a mating 3-prong
grounding-type wall receptacle, grounded
in accordance with the National Electrical
Code (ANSVNFPA 70 - latest edition) and
local codes and ordinances. If a mating wall
receptacle is not available, it is the responsi-
bility of the customer to have a properly
grounded 3-prong wall receptacle installed
by a qualified electrician.
Electrical requirements
A 115 volt (103.5 min., 126.5 max.), 60 Hz,
AC only, 15 ampere fused electrical supply
is required (time delay fuse or time delay cir-
cuit breaker required). It is required that a
separate circuit, serving only this air condi-
tioner, be provided.

115 volt models with amperes from 7.6
through 12.0
Receptacle wiring
Receptacle wiring should be a minimum of
14 gauge. Use copper wire only. It is the
responsibility of the consumer to provide
proper and adequate receptacle wiring,
installed by a qualified electrician. Observe
National Electrical Code and all local
governing codes and ordinances.
Electrical connection
Electrical ground is required on this air
conditioner.
Recommended grounding method
For your personal safety, this air conditioner
must be grounded. This air conditioner is
equipped with a power supply cord
having a 3-prong grounding plug. To mini-
mize possible shock hazard, the cord
must be plugged into a mating 3-prong
grounding-type wall receptacle, grounded
in accordance with the National Electrical
Code (ANSVNFPA 70 - latest edition) and
local codes and ordinances. If a mating wall
receptacle is not available, it is the responsi-
bility of the customer to have a properly
grounded 3-prong wall receptacle installed
by a qualified electrician.
Electrical requirements
A 115 volt (103.5 min., 126.5 max.), 60 Hz,
AC only, 15 ampere fused electrical supply
is required (time delay fuse or time delay
circuit breaker required). It is required that a
separate circuit, serving only this air condi-
tioner, be provided.
3-prong
grounding
Plug
3-prong
grounding
type wall
Poker
SUPPlY
cord
L receptacle
(single outlet)

Installing Your Air
Conditioner
Preparing for installation
Tools required
l Flat-head screwdriver
l Carpenter’s level Excessive Weight Hazard
l Tape measure Use 2 or more people to move and
l Electric or hand drill install air conditioner.
l %-inch drill bit Failure to do so can result in back
l Pencil or other injury.
. Awl
l Knife
Installation tips
1. Choose a proper size window.
l 15% inches minimum width
l 22 inches minimum height
l 36 inches maximum height
NOTE: The height measurement must be
of an unobstructed opening above the
mounting platform. In some cases, due to
a variety of stop and track arrangements,
the above dimensions may vary slightly.
2. Choose the proper window location.
Choose a window that will allow the
cooled air to flow freely and directly into
the room(s) you want to cool. Remember,
it is difficult to move air around corners.
Also, choose a window that is within
6 feet of an electrical outlet. (See ‘Electri-
cal requirements” on pages 5-7 for
receptacle and wiring needs.) Do not
use an extension cord.

Installing in a sliding window
NOTE: This air conditioner must be installed
according to all applicable codes and
ordinances.
1.
2.
3.
Choose the installation site. The window
frame and side of the structure must be
able to support at least 110 Ibs. of weight.
Remove one sliding sash from the
window frame.
Loosely attach the support angle to the
bottom of the support platform using two
‘/16” long machine screws, flat washers,
and nuts.
4. Place the support platform against the
lower window track and firmly against the
vertical edge of the window frame.
5. Attach the support platform to the window
stool using two self-tapping screws.
Tighten screws securely.
7/r6” long
- \
-upport
platform
N Support angle
Ill I
Support platform
Lower window
track
continued on next page
9

6. Pull the support angle against the outside
of the structure. Tighten two 36” long
machine screws on top of the support
platform.
7. Adjust the leveling bolt to position the
support angle in a level plane. This will
allow for proper angle. Tighten the
leveling bolt locknut. The air conditioner
must be tilted back slightly to facilitate
proper condensate disposal.
NOTES: Be sure the window track is
securely attached to the building con-
struction. Use longer screws into the
subframing if necessary.
Do not drill a hole in the bottom pan.
The air conditioner is designed to operate
with approximately W’ of water in the
bottom pan.
8. Cut two pieces of adhesive back foam
seal equal to the height of the window
opening. Remove backing and apply to
the vertical inside edges of the window
frame and sliding sash that will rest
against the air conditioner.
9. Replace the sliding sash in the
window frame.
ne screws
window track
Top retainer Filler panel
Foam seal
10
Channel

10. Slide the air conditioner onto the support
platform. Be sure the unit side channel
butts against the vertical edge of the
window frame. Watch out for the sharp
metal fins on the front and rear coils.
NOTE: If unit side channel does not fit
securely, remove air conditioner and
readjust leveling bolt.
11. Using the existing clearance holes in the
air conditioner’s bottom bar as guides,
drill two ‘/a” holes through the window
channel frame. Install two self-threading
screws through the clearance holes and
into these holes. Tighten the screws
securely. The air conditioner should be
firmly anchored to the window channel
frame. Be sure your air conditioner does
not fall out during installation.
12. Slide the inside window sash closed.
Make sure the vertical edge of the inside
window sash is pressed firmly against the
side of the unit cabinet. Cut remaining
adhesive back foam seal equal to the
width of the window opening. Remove the
backing and apply to the top inside edge
of the window frame.
13. Install the speed clips on the top and
bottom inside edges of the window to
provide locking.
14. Insert the appropriate plastic foam seal
between the inside window sash and the
outside window.
15. Place the top retainer on the top edge
of the filler panel. Then place the bottom
edge of the filler panel into the groove of
the bottom retainer which is mounted on
the air conditioner. The filler panel may
be trimmed with a knife or scissors to fit
the window height.
16. Slide the sliders upward making sure the
filler panel aligns in the sliders.
17. With the sliders up against the top re-
tainer, drill ‘/enhole through the window
frame using the existing clearance hole
in the slider as a guide. Install the self-
threading screw in the hole and tighten
securely. Repeat for the other slider.
18. Check all seals and plug all air leaks
around the air conditioner with a suitable
weather-proof sealing compound.
Excessive Weight Hazard
Use 2 or more people to move and
install air conditioner.
Failure to do so can result in back or
other injury.
SUpport platform Window channel frame
Channel
Foam seal

Installing in a casement window
Since styles and sizes of casement windows
vary widely, it is advisable to have the air
conditioner installed by someone skilled in
this type of installation. Your appliance
dealer can recommend or supply qualified
people to install your air conditioner.
1. Closed or stationary windows: Install
unit in stationary sash to avoid crank
handles or window latches. If unit is to be
installed in or next to a movable sash, it
may be necessary to remove catch,
handle, or both. Remove crank handle
and secure window in closed position.
Remove glass panes and horizontal
mountings to a height sufficient to
mount unit.
3. A filler panel will be required at the side of
the air conditioner when installed in win-
dows having width greater than 15W.
Filler panel should be made from %” thick
wood securely anchored to one side of
the opening so that a 15%” wide opening
is provided. The filler panel should run the
full length of the window. Paint to suit.
4. Install the air conditioner in the same
manner as described for sliding
windows.(See “Installing in a sliding
window” on page 9.)
2. Open window frame: Remove crank
mechanism and catch handles. Fold the
window sash back against the exterior
wall of the building and secure, or
remove completely where possible.
Do not block air circulation to the
outside louvers.
Installing in a wood sliding or wood
casement window
1. For a wood casement window, it is
necessary to construct a frame, using at
least 1” thick wood with a 15%” wide
opening.
2. Paint the frame and fasten it securely,
sealing it into the window opening.
3. Install the air conditioner into the frame
following procedures for metal sliding and
casement windows. (See ‘Installing in a
sliding window” on page 9.)
12

Operating Your Air
Conditioner
In order to obtain the best possible results from your air conditioner, it is important that you
operate it properly. This section will tell you how to do just that.
Starting your air conditioner
1. Set Exhaust Vent Control to CLOSED
for maximum cooling performance.
2. Set Fan Control to the desired setting.
HIGH FAN ............. for maximum room air
circulation when no cooling is desired
QUICK COMFORT ...... for fastest cooling
MED COOL ..
...
_
...........for normal cooling
LOW COOL ............ for minimum cooling
LOW FAN .............. for minimum room air
circulation when no cooling is desired
3. Turn the Thermostat Control to the
desired setting. You can adjust the air
conditioner’s cooling performance by
turning the Thermostat Control clockwise
for more cooling or counterclockwise for
less cooling. You will need to experiment
to find the setting which suits you best.
4. To turn the air conditioner off, or in the
event of a power interruption, turn Fan
Control to OFF.
NOTE: If you turn your air conditioner off or
if the compressor turns off when lowering
the Thermostat Control, wait at least
three minutes before turning it back on.
Doing-this keeps the air conditioner from
blowing a fuse or tripping a circuit breaker.
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock
Electrical Shock Haxard
Plug into a grounded 3-prong outlet.
Do not remove ground prong.
Failure to follow these instructions
can result in death or electrical
shock.
13

Using the exhaust vent control
The Exhaust Vent Control draws stale or
smoky air from the room or circulates
existing room air.
To exhaust room air:
1. Set Exhaust Vent Control to OPEN.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to High
Fan or Low Fan.
3. Set Thermostat Control to desired setting.
To circulate room air:
1. Set Exhaust Vent Control to CLOSED.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to High
Fan or Low Fan.
3. Set Thermostat Control to desired setting.
NOTE: For maximum performance, the
Exhaust Vent Control must be in the
CLOSED position when cooling or room
air circulation is desired.
Changing air direction
The louvers, in the top grille area of the air
conditioner, control the direction of the
cooled air. Move the levers in the direction
you want the air to go (right or left).
Lever for left/right airflow
14

Caring For Your Air
Conditioner
Proper maintenance of your air conditioner will help ensure longer life and lower operating
costs. This section will tell you how to clean your air conditioner and perform annual
maintenance. You can always call your authorized Whirlpool servicing dealer for an annual
checkup.
Cleaning the front panel
Explosion Hazard
Unplug power cord from outlet
before cleaning air conditioner.
Use only nonflammable cleaners.
Failure to follow these instructions
can result in death, explosion, fire,
or electrical shock.
1. Unplug the power cord.
2. Grasp both sides of the front panel and
pull forward. The front panel will pivot
forward to reveal the air filter.
3. Remove the air filter from the tabs and
clean it separately. (See “Cleaning the air
filter” on page 16.)
4. Clean front panel with warm water, mild
soap or detergent, and a soft cloth. Rinse
and dry thoroughly.
5. Wipe control panel clean with a soft,
dry cloth.
6. Replace air filter.
7. Replace the front panel.
8. Plug in the power cord.
15

Cleaning the air filter
The filter may be cleaned. A clean filter
helps remove dust, lint, and other particles
from the air. Check every two weeks to see
if filter needs cleaning.
1. Turn Fan Control to OFF.
2. Grasp both sides of the inlet grille and pull
forward. The front panel will pivot forward
to reveal the air filter.
3. Remove the air filter from the tabs.
4. Carefully wash the air filter with a mild
detergent and warm water. Rinse with
clear water, squeeze dry, and replace.
5. Replace the front panel.
6. Return Fan Control to the desired setting.
Filter
16

Annual maintenance
Your air conditioner needs annual
maintenance to help ensure steady, top
performance throughout the year.
Call the service company recommended
by your dealer to:
l Inspect and clean the coils and conden-
sate water passages.
l Check fan and fan motor.
The compressor is sealed and needs no
oiling. The expense of an annual inspection
is the customer’s responsibility.
OR
If you are familiar with electrical appliances,
you can do the cleaning and maintenance
yourself. If you choose to do so, follow these
steps:
1. Unplug power cord.
2. Remove the air conditioner from the
window channel frame and off of the
support platform.
3. Remove the front panel. (See page 15.)
4. Remove the screws from the top and sides
of the cabinet, and then remove the
cabinet.
5. Wrap the motor, electrical control box, and
compressor terminal box in plastic film to
make sure no water or other liquid gets
inside. Water or other liquids could dam-
age the insulation and cause serious
mechanical problems.
6. Clean and hose out the base, coils, and
condensate pan. Clean at least once a
year, or more often if the condenser coils
and pan collect dirt, sand, leaves, insects,
or algae. Also, clean if you detect an odor
coming from the air conditioner. Do not use
the water collected in the air conditioner for
drinking purposes. It is not sanitary.
7. Remove the plastic film from the motor and
electrical parts.
8. Reattach the cabinet with the screws.
Replace the front panel, and reinstall the
air conditioner.
9. Reconnect power supply.
Electrical Shock Hazard
Unplug power cord from outlet
before servicing.
Be sure no liquid gets into the motor,
electrical control box, or compressor
terminals.
Failure to follow these instructions
can result in death, electrical shock,
or serious injury.
Excessive Weight Hazard
Use 2 or more people to move and
install air conditioner.
Failure to do so can result in back or
other injury.
NOTE: It is a good idea to wait 24 hours
before starting the air conditioner again. This
allows time for all areas to dry out. The
water from rainfall or from normal operation
does not harm these components.
17

Understanding normal operating sounds
When your air conditioner is operating
normally, you will hear sounds such as:
l Droplets of water hitting the condenser,
causing a “pinging” or “clicking” sound.
Water droplets help to cool the condenser.
l Air movement from the fan, especially on
high fan speed settings.
l Clicks from the thermostat cycle.
Sounds also may be caused by house
construction - such as vibration of the unit
due to wall construction or unsteady window
mounting area.
Saving energy
You can help save energy by following the
tips below.
l Improve your home’s insulation. Seal all
doors and windows. Close the
fireplace flue.
l Close all blinds and drapes on sunny sides
of the house. Add window awnings.
l Keep the air filter clean.
l Do not block the airflow with drapes or
furniture.
l Ventilate the attic. High temperatures in
the attic add to the air conditioner’s
cooling load.
l Try not to use heat-producing appliances
during the hottest part of the day.
l Turn off lights and appliances when they
are not needed.
l Keep heat registers and cool-air
returns closed.
l Use exhaust venting fans when cooking,
doing laundry, or bathing.
18

Troubleshooting
Listed in the chart below are the most common problems consumers run into with their air
conditioners. Please read through this chart before calling for service. It could save you the
cost of a service call.
PROBLEM
Air conditioner
won’t run
CHECK THE FOLLOWING
Is the air conditioner plugged into a live circuit with proper
voltage?
Has the time-delay fuse blown or circuit breaker tripped?
Is the Fan Control set to OFF?
Is the Thermostat Control set correctly?
Has the local power failed?
Air conditioner Are timedelay fuses being used?
blows fuses or
trips circuit
breaker Is an extension cord being used? Do not use an extension
cord with this or any other appliance.
Are you waiting three minutes before trying to restart the air
conditioner?
Air conditioner
turns on and off
OR
does not cool the
Is the air filter clean?
Are the inside evaporator coils and the outside condenser
coils clean?
room Is there excessive moisture or heat in the room (open container
cooking, showers, etc.)?
Is the Fan Control set too low?
Is the Thermostat Control set too low?
19

Requesting Assistance
or Service
Before calling for assistance or service, please check “Troubleshooting” on page 19. It may
save you the cost of a service call. If you still need help, follow the instructions below.
1. If you need assistance* ...
Call the Whirlpool Consumer Assistance
H
Center telephone number.
w Dial toll-free from anywhere
in the U.S.A.:
l-800-253-1 301
and talk with one of our trained
consultants. The consultant can instruct you
in how to obtain satisfactory operation from
your appliance or, if service is necessary,
recommend a qualified service company
in your area.
If you prefer, write to:
Mr. William Clark
Consumer Assistance Representative
Whirlpool Corporation
2000 North M-63
Benton Harbor, Ml 49022-2692
Please include a daytime phone number in
your correspondence.
2. If you need service* ...
Whirlpool has a nationwide network of
El
authorized Whirlpool service
companies. Whirlpool service
SERVlCI technicians are trained to fulfill
the product warranty and
provide after-warranty service,
anywhere in the United States. To locate the
authorized Whirlpool service company in
your area, call our Consumer Assistance
Center telephone number (see Step 1) or
look in your telephone directory Yellow
Pages under:
‘APPuANcE-HouSEHoLD l WASHING MACHINES 6
WuOFt, SERVICE 6 REPAIR DRYERS, SERVCE 6 REPAIR
- see: Whdpool Appkancas or _See: Whirlpool Appliances or
Aurhoflzed WNrlpcd sad Aulholizad Wtwqmol salvice
esmpb9rxw sarvia, co.) (Gamplerm ser.%8 Co.)
3. If you need FSP
replacement parts ...
FSP is a registered trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your WHIRLPOOL@-’
appliance. FSP replacement parts will fit
right and work right, because they are made
to the same exacting specifications used to
build every new WHIRLPOOL appliance.
To locate FSP replacement parts in your
area, refer to Step 2 or call the Whirlpool
Consumer Assistance Center number in
Step 1.
4. If you are not satisfied
with how the problem
was solved ...
l Contact the Major Appliance Consumer
Action Program (MACAP). MACAP is a
group of independent consumer experts
that voices consumer views at the highest
levels of the major appliance industry.
l Contact MACAP only when the dealer,
authorized servicer, and Whirlpool have
failed to resolve your problem.
Major Appliance Consumer Action Program
20 North Wacker Drive
Chicago, IL 60606
l MACAP will in turn inform us of
your action.
l When asking for help or service:
Please provide a detailed description of the problem, your appliance’s complete model
and serial numbers, and the purchase date. (See page 2.) This information will help US
respond properly to your request.
20