Whirlpool AKM 605 User manual

11
CONTENTS
DESCRIPTION PAGE 12
BEFORE USING THE GLASS CERAMIC HOB PAGE 13
PRECAUTIONS AND USEFUL SUGGESTIONS PAGE 14
HOW TO USE YOUR GLASS CERAMIC HOB PAGE 15
HOW TO USE THE DUAL COOKING ZONE PAGE 15
COOKING HINTS PAGE 16
ENERGY SAVING HINTS PAGE 17
HOW TO CLEAN THE GLASS CERAMIC HOB PAGE 17
HOW TO INSTALL THE GLASS CERAMIC HOB PAGE 18
TECHNICAL DATA PAGE 20
SERVICE PAGE 20

12
DESCRIPTION
AKM 605
1. Dual zone radiant plate Ø 210x210
2. Oval radiant plate 145x250
3. Haloring plate Ø 145
4. Haloring plate Ø 180
5. Indicator lights
AKM 611
1. Dual zone radiant plate Ø 210x120
2. Oval radiant plate 145x250
3. Quick Star plate Ø 145
4. Quick Star plate Ø 180
5. Indicator lights

13
BEFORE USING THE HOB
●To make the most of your hob, please read
these instructions carefully before use. Keep
them for future reference.
●Please ensure that the glass of the hob is not
broken and/or cracked.
●The packing parts (plastic bags, polystyrene,
scraper, etc.) must be kept away from the
reach of children as they can constitute a po-
tential source of danger.
Environmental hints
Packing
Do not throw the packing into the garbage:
first sort out the different materials (i.e.: steel,
cardboard, polystyrene) following local regu-
lations.
●This appliance has been designed for dome-
stic "cooking" use only.

14
PRECAUTIONS AND USEFUL SUGGESTIONS
●The Manufacturer cannot be held responsible
for damages derived from improper, wrong
and unreasonable use. (i.e. heating rooms).
The use of electric household appliances requi-
res observation of several fundamental rules.
●The glass ceramic hob has a good mechanical
strength and can withstand small accidents,
misuse; however, if some objects should fall
on the surface and damage it, please do not
use the hob. Disconnect it from the electrical
supply and contact the nearest Service Centre.
●Do not use the glass ceramic hob as a working
surface.
●Do not use plastic utensils or aluminium foil
containers to cook foods on the glass ceramic
hob.
●Before operating the hob, check that the
cooking zones are clean, with no grease,
food or liquid deposits: do not use pans with
wet bases.
●When the hob is in use, the surface of the
cooking zones is very hot. For this reason
keep children away from it.
●As overheated fats and oils can easily ignite,
do not leave frying food unattended.
●Do not operate the cooking zones without
anything on them.
●Do not let electric wires (i.e.: of small hou-
sehold appliances) come into contact with
warm parts of the hob.
●Remember synthetic clothes, plastic utensils
or any other similar materials could ignite on
the hob.
●Take care not to scratch the surface of
the glass ceramic hob with the bottom of
pans.
●For best cooking results, we recommend the
use of stainless steel pans with flat bases. The
diameter of the base must be the same or sli-
ghtly greater than that of the plate.
●Never sprinkle sugar or sweetened foods
su
ch as jams, jellies and juices on the hob.
Should it happen, please clean thoroughly
the hob by carefully following the cleaning
instructions.

15
HOW TO USE YOUR GLASS CERAMIC HOB
HOW TO USE THE DUAL COOKING ZONE
●The cooking zones are clearly marked on the
hob surface.
●The switching on, adjustment and switching
off of the cooking zones are controlled by
turning the knobs situated on the oven
clockwise.
These knobs are marked 0 to 6 or 0 to 11.
Each number corresponds to a cooking power.
●The hob is provided with 4 indicator lights
showing when the cooking zones are hot.
These indicator lights switch on as soon as the
cooking zones reach a high temperature
.
These indicator lights remain on even after
switching off of the relevant cooking zone
and they switch off only when the tempera-
ture of the cooking zone is no longer dange-
rous.
There is the possibility to increase or enlarge the
cooking zone by switching on an additional
second zone. You switch on the second zone
turning the knob clockwise to the end position
(above position 11) .
Afterwards you can adjust on the requested
power (between 11 and 1). To reuse the inter-
nal cooking zone, switch off and switch on
again.

16
Cooking chart
11 positions Knobs Suitable for:
Knob positions
6
11 boil water to cook pasta
10-11 fry potatoes, fish, cook meat
5
9-10 boil potatoes, prepare roasts, steaks,
8-9 cordon bleu, hamburgers
4
7-8 sausages, liver, eggs
5-6 prepare soups
3
4-5 steam vegetables and meat
3-4 boiled fish
2
2-3 rice and milk
1-2 foods containing milk and eggs
steam cooking.: potatoes, vegetables, reheat already cooked foods
1 1 omelette, delicate sauces, melt butter, chocolate, jellies
0 0 off position
The data given in the chart are for indication only.
COOKING HINTS

17
ENERGY SAVING HINTS
HOW TO CLEAN THE GLASS CERAMIC HOB
●Clean the hob only when it has cooled down.
Please make sure that the hob is clean prior
to using it.
● To clean the hob, use a sponge or a damp cloth.
To clean encrusted foods or fats, use the scraper
supplied.
Important: prior to using the scraper, please
read the relevant instructions for use.
●Do not use the scraper on the rim of the hob.
●Only use cleaning products specifically desi-
gned for glass ceramic hobs. Avoid using
abrasive cleaners.
● The bottom of pans must be the same or sli-
ghtly greater than that of the cooking zone -
never smaller.
● Only use pans with a thick flat base.
● Possilby use a cover. You can set a lower
power and save energy.
● Boil vegetables, potatoes, etc. with a little wa-
ter to save energy.
● Pressure pans help to save energy and are
quicker than traditional pans.
NO!

18
HOW TO INSTALL THE GLASS CERAMIC HOB (FOR THE QUALIFIED TECHNICIAN)
●IMPORTANT HINTS
This appliance conforms to EEC directive
87/308/EEC on radiointerference.
It belongs to Class Y against fire-risks and
may be installed near a column.
Conformity declaration
This appliance incorporates parts inten-
ded to come into contact with foodstuffs
in compliance with EEC directive
89/109/CEE.
The glass ceramic hob may be installed in a
structure with a flat surface from 30 to 50 mm.
A - If the structure is made of wood, use the
springs and screws provided with the ap-
pliance.
● Position the 4 springs (A) as illustrated, re-
specting the dimensions shown.
● Fix the springs by the 4 screws (B).
● Mount the hob in the worktop (see drawing).
B - If the structure is made of marble or any
other material (plastic, ceramic, stone, etc.,
use particular brackets which can be obtain-
ed from Service (code N. 4819 404 78697).
● Position the hob in the worktop.
● Position the 4 brackets (C) as illustrated, de-
pendent on the thickness of the worktop.
● Fix the 4 screws (E) into position (D).

19
Assembly
●Make an opening in the worktop, following
the dimension (in mm) shown in the illustra-
tion.
●Prior to installing the hob, treat the opening
of the worktop with an hydrorepulsive mate-
rial (i.e.: silicone).
●To facilitate the cutting operations, a templa-
te is available by Service (Code N. 4819 395
88003). The distance between the lower face
of the glass ceramic hob and the cupboard or
separating panel must be at least of 90 mm.
Electrical connection
To be carried out before the electrical con-
nection to the mains.
The appliance must be installed by a competent
electrician, with all electrical and installation re-
quirements made in accordance with local regu-
lations.
Ensure that your supply voltage is the same
as the voltage stated on the rating plate.
The earthing of the appliance is compulsory
by law: for this reason all current and earth
conductors must be of an appropriate size.
Ensure that the earthing is effective.
No liability for damage or injury to persons
or property will be accepted from non-ob-
servance of these requirements.
Installation of the hob, coupled
with an under the counter oven
●Carry out the earth connection between the
hob and the oven as shown.
●Connect the wires of the hob with the oven
junction block (top rear) paying attention that
the correspondance of the coloured plugs is
respected.
After installation of the hob, the electrical
parts must be inaccessible.
The installer is responsible of the correct in-
stallation of the appliance.
●After the electrical connection, fit the hob
from the top and hook it to the support
springs, according to the illustration.
HOW TO INSTALL THE GLASS CERAMIC HOB

20
TECHNICAL DATA
Power of the cooking zones 230 V
AKM 605 Power W
1. Dual zone radiant plate Ø 210x120 2100 (inner 700 - outer 1400)
2. Oval radiant plate Ø 145x250 1800 (inner 1000 - outer 800)
3. Haloring plate Ø 145 1200
4. Haloring plate Ø 180 1800
AKM 611 Power W
1. Dual zone radiant plate Ø 210x120 2100 (inner 700 - outer 1400)
2. Oval radiant plate Ø 145x250 1800 (inner 1000 - outer 800)
3. Quick Star plate Ø 145 1200
4. Quick Star plate Ø 180 1700
SERVICE
●If the hob does not work, contact Service in-
dicating the serial number and the model
number which is stated on the guarantee.
●ATTENTION
Repairs must only be performed by authori-
zed Service Centres. It is dangerous for
anyone other than a service engineer trained
by the manufacturer to repair the product.
●Should your require the ACCESSORY TO
PROTECT CHILDREN AMH 122 (Code Nr.
8531 122 01000) please contact Service.