WHITECROFT LIGHTING Egress Exit Manual

Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Telephone [phone] Facsimile: [phone]
Registered No. 3848973 England Registered Office: As above
Egress Exit Surface/Suspended
Installation Leaflet
Feb 2021 - Rev A

DALI Wiring

GENERAL INFORMATION
1. A qualified electrician, in accordance with IEE wiring regulations, should carry
out connection to mains wiring.
2. Ensure that the rated voltage and frequency requirements are compatible with
the available mains supply.
3. Cleaning of reflectors and lenses should be carried out using clean, soft and lint
free cloths and anti-static cleaning fluid.
4. Do not carry out high voltage insulation test, i.e. 500/1000v this may damage
internal components.
5. Electrically isolate this luminaire during maintenance.
6. Replacing the light source within this luminaire shall only be carried out by the
manufacturer, service agent or a similar qualified person.
Specification
Finish White.
Materials Polycarbonate Body
IP Rating IP40
Weight 0.5 Kg
Ambient Operating 0° to 45°
temp
Protection Class II
Power Supply 220-240AC, 50/60 Hz
TECHNICAL SUPPORT
Tel: [phone]
e-mail: tech-
[e-mail]
www.whitecroftlighting.com