Whittier Wood Furniture 2090AFGSPc User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 04/13
Model #
2090AFGSPc;
2090AFCAFc
56"W Pacific
Media Console
AFGSP = Glazed Spice finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for
commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and
supports.
Handle the glass plates with care. Glass is fragile.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors
or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

2090AFGSPc; 2090AFCAFc 56"W Pacific Media Console
Parts List
2090AFGSPc_2090AFCAFc —Page 2 —04/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top (attached)
1
B
Adjustable Shelf (attached)
2
Cc
Case
1
D
Removable Back (installed)
2
E
Door Frame (installed)
2
G
Drawer Box (inserted)
6
H H
Drawer Face (installed)
6
I
Door Glass (attached)
2
J L
Glass Retainer (inserted) (9-feet)
1
K M
Drawer Slides (pre-installed sets)
6
L
Shelf Bracket (installed)
8
M
#6 x 1/2" Undercut Screw (inserted)
8
N
#6 x 3/4" Philtruss Screw (inserted)
36
O
#6 x 1/2" Philtruss Screw (inserted)
36
S
Small Adjustable Glide (installed)
4
U
Knob (attached)
2
V
#8 x 1-1/4" Machine Screw (installed)
2
W
Handle (attached)
6
Y1
Hinge (attached)
4
Z1
Hinge Plate (attached)
4
ZA Z
#6 x 3/4" P.O Screw (inserted)
16
ZB Z
Drawer Stop (attached)
4
ZC
Turn Button (attached)
4

2090AFGSPc; 2090AFCAFc 56"W Pacific Media Console
Parts List
2090AFGSPc_2090AFCAFc —Page 3 —04/13
Part
Description
Quantity
ZD
#6 x 5/8" Philtruss Screw (inserted)
12
ZE
#8 x 1-1/4" Pan Head Screw (inserted)
18
ZG
#8 x 1-1/4" Black Screw (inserted)
23
ZH
#8 x 1" Lo-Profile Screw (inserted)
24
ZI
Hex Bumper (attached)
2
ZJ
#8 x 1-1/8" Lo-Profile Screw (inserted)
6
ZK
Insert Nut (inserted)
4
ZL Z
#8 x 1-5/8" Machine Screw (installed)
12
ZM
#8 x 1-3/8" Lo-Profile Screw (inserted)
6
ZN
#8 x 20mm Pan Head Screw (inserted)
4
ZO
Foot Bracket (attached)
1
ZP
Adjustable Glide (installed)
1
TR
Furniture Tipping Restraint
2 sets

2090AFGSPc; 2090AFCAFc 56"W Pacific Media Console
Assembly Instructions
2090AFGSPc_2090AFCAFc —Page 4 —04/13
Tool Required: Phillips Screwdriver
1. Place the console at its final destination. Rotate the Adjustable Glides (S) found at the corners
of the unit and (ZP) at the bottom of the Center Foot until the unit is level. See Figure 1.
2. You may want to remove the Removable Backs (D) so that you can fit your media units into the
console more easily. To do so, unlock the Turn Button (ZC) as shown in Figures 2 and 2b. Slide
the Backs away and place them off to the side. To put them back into place, slide the Backs
behind the Drawer Stops (ZB) and position the Turn Button so that it is locked.
See Figures 2a and 2b.
ZB
ZC
Locked
Position
Fig. 2
Fig. 2a
Unlocked
Position
Fig. 2b
ZC
D
D
ZB
Fig. 1
S
ZP
S

2090AFGSPc; 2090AFCAFc 56"W Pacific Media Console
Assembly Instructions
2090AFGSPc_2090AFCAFc —Page 5 —04/13
3. To move the Adjustable Shelves (B), remove the #6 x 1/2" Undercut Screws (M) and the
Shelves (B). Move the Shelf Brackets (L) to the desired positions, replace the shelf and insert
the screws. See Figures 3 and 3a.
4. To adjust the doors, follow the instructions below.
Fig. 4a
1
Side adjustment 4mm (5/32")
To move the door towards the side
panel, loosen screw ‘1’and tighten
screw ‘2’. To move the door away
from the side panel, loosen screw
‘2’ and tighten screw ‘1’.
Depth Adjustment 4mm (5/32")
Loosen screw ‘2’ (just one turn),
adjust the door to the desired position
and tighten the screw.
Height Adjustment 4mm (5/32")
Loosen screw ‘3’, adjust the door to
the desired position and tighten
the screw.
3
3
2
Door
Hinge
Arm
Y1
Fig. 4
Z1
2
Fig. 3
M
L
Fig. 3a
Door removed for illustration purposes.
B

2090AFGSPc; 2090AFCAFc 56"W Pacific Media Console
Assembly Instructions
2090AFGSPc_2090AFCAFc —Page 6 —04/13
5. Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 5a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 5b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 5c and 5d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 5a
T1
T3
Pull tight
Fig. 5d
T1
T2
T3
T4
Fig. 5c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T4
T1
Fig. 5b