Whittier Wood Furniture McKenzie 1346AFGACc User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 11/11
McKenzie Bed Collection
Assembly Instructions
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Congratulations!
This fine piece of furniture will make a gorgeous addition
to your home. For the best results, read the Assembly
Instructions before you begin your project.
.
IMPORTANT NOTES:
•For normal household use only. Not recommended to
use this product in a commercial setting.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws
and supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
•This assembly requires two people.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE
CALL US FIRST! Do not return this item to the store.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, phone, fax, mail or email your request to the Whittier
Wood Products customer service department.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(above the illustration of your unit), the part letter,
production code, quantity needed, reason for replacement
and your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Model #
1346AFGACc;
1346AFCAFc
McKenzie Queen Bed
Model #
1349AFGACc;
1349AFCAFc
McKenzie King Bed
Model #
1352AFGAC;
1352AFCAF
McKenzie Cal-King Bed

1346AFGACc; 1346AFCAFc McKenzie Queen Bed;
1349AFGACc; 1349AFCAFc McKenzie King Bed;
1352AFGAC; 1352AFCAF McKenzie Cal-King Bed
Parts List
1346AFGACc_1346AFCAFc_1349AFGACc_1349AFCAFc_1352AFGAC_1352AFCAF — Page 2 — 11/11
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
1347AFGACb; 1347AFCAFb Queen Bed (Headboard/Footboard Kit)
1350AFGACb; 1350AFCAFb King Bed (Headboard/Footboard Kit)
1353AFGAC; 1353AFCAF Cal-King Bed (Headboard/Footboard Kit)
Part Description Quantity
A Headboard 1
B Footboard 1
C (1353)
Cb (1347 & 1350) Slat 5
D (1353)
Db (1347 & 1350) Assembled Foot 4
E #8 x 1-1/4" Black Screw 26 (16 inserted)
H 1/4" x 1/2" Hex Bolt 8
I Male Bracket (attached) 4
J 1/4" Lock Washer 8
L Adjustable Glide 4
M T-Nut (inserted) 9
N 5mm Hex Wrench 1
Q Hanger Bolt (inserted) 4
S #8 x 1-5/8" Black Screw (inserted) 4
U Slat Support (attached) 1
V #8 x 1-3/4" Pan Head Screw (inserted) 3
1347 shown in illustrations.

1346AFGACc; 1346AFCAFc McKenzie Queen Bed;
1349AFGACc; 1349AFCAFc McKenzie King Bed;
1352AFGAC; 1352AFCAF McKenzie Cal-King Bed
Parts List
1346AFGACc_1346AFCAFc_1349AFGACc_1349AFCAFc_1352AFGAC_1352AFCAF — Page 3 — 11/11
1348AFGACc; 1348AFCAFc Queen/King Bed Rail Kit;
1354AFGAC; 1354AFCAF Cal-King Bed Rail Kit
Part Description Quantity
G (1354)
Gc (1348) Side Rail 2
K #8 x 1" Black Screw (inserted) 16
O Female Bracket (attached) 4
W #8 x 2" Black Screw (inserted) 22
1348 shown in illustrations.

1346AFGACc; 1346AFCAFc McKenzie Queen Bed;
1349AFGACc; 1349AFCAFc McKenzie King Bed;
1352AFGAC; 1352AFCAF McKenzie Cal-King Bed
Assembly Instructions
1346AFGACc_1346AFCAFc_1349AFGACc_1349AFCAFc_1352AFGAC_1352AFCAF — Page 4 — 11/11
Tools Required: 5mm Hex Wrench (provided) and Phillips Screwdriver
1. Remove the Slats (C or Cb) from the back of the Headboard (A) as seen in Figure 1 and place
them off to the side.
2. Using the Hex Wrench (N) provided, attach the Side Rails (G or Gc) to the Headboard (A) with
four 1/4" x 1/2" Hex Bolts (H) and 1/4" Lock Washers (J) as shown in Figures 2 and 2a.
H
Fig. 2
A
G or Gc
J
J
H
Fig. 2a
J
H x 4 x 4
Fig. 1
A
Shipping Strap
C or Cb

1346AFGACc; 1346AFCAFc McKenzie Queen Bed;
1349AFGACc; 1349AFCAFc McKenzie King Bed;
1352AFGAC; 1352AFCAF McKenzie Cal-King Bed
Assembly Instructions
1346AFGACc_1346AFCAFc_1349AFGACc_1349AFCAFc_1352AFGAC_1352AFCAF — Page 5 — 11/11
3. Using the Hex Wrench (N) provided, attach the Footboard (B) to the Side Rails with four
1/4" x 1/2" Hex Bolts (H) and 1/4" Lock Washers (J) as shown in Figures 3 and 3a.
4. Attach an Assembled Foot (D or Db) to four of the Slats (C or Cb) as shown in Figure 4.
Fig. 3
B
H
J
Fig. 3a
J
H x 4 x 4
C or Cb
Fig. 4
X 4
D or Db

1346AFGACc; 1346AFCAFc McKenzie Queen Bed;
1349AFGACc; 1349AFCAFc McKenzie King Bed;
1352AFGAC; 1352AFCAF McKenzie Cal-King Bed
Assembly Instructions
1346AFGACc_1346AFCAFc_1349AFGACc_1349AFCAFc_1352AFGAC_1352AFCAF — Page 6 — 11/11
5. Place the bed at its final location.
6. Position the Slats (C or Cb) on the bottom edges of the rails and place the slat without the Foot
Assembly nearest to the Footboard. Attach with #8 x 1-1/4" Black Screws (E).
See Figure 6.
7. Adjust the Glides (L) on the Foot Assemblies (Db) so the Glides just touch the floor, making sure
the Foot Assemblies bear weight.
E x 10
Fig. 6
E
C or Cb
Slat without
a Foot
Assembly.
C or Cb
C or Cb
L
Fig. 7 Db