Whittier Wood Furniture 2210ASTa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 11/21
Ellison Panel
Beds
AST = Astoria Sky finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
2210ASTa
Ellison Queen Panel Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
2213ASTa
Ellison King Panel Bed

2210ASTa Ellison Queen Panel Bed
2213ASTa Ellison King Panel Bed
Parts List
2210ASTa_2213ASTa — Page 2 — 11/21
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
2211ASTa Queen Panel Headboard/Footboard Kit (x1)
2214ASTa King Panel Headboard/Footboard Kit (x1)
Part
Description
Quantity
2211ASTa
2214ASTa
A
Headboard Assembly
1
1
Ba
Footboard Assembly
1
1
C
Assembled Foot
4
4
D
Slat
5
5
E
Adjustable Glide with Hex Nut (installed)
4
4
F
#8 x 7/8" Black Lo-Profile Screw (inserted)
23
25
G
#8 x 1-1/4" Black Screw
12
(2 inserted)
12
(2 inserted)
I
#8 x 1" Black Screw (inserted)
24
24
J
1/4" T-Nut (inserted)
5
5
K
5/16" x 3/4" Insert Nut (inserted)
4
4
L
1/4" x 45mm Hanger Bolt (inserted)
4
4
M
Small Left Bed Bracket (attached)
4
4
N
Small Right Bed Bracket (attached)
4
4
S
#10 x 2" Pan Head Screw (inserted)
5
5
T
Footboard Support Assembly (attached)
1
1
U
#8 x 2" Black Screw (inserted)
2
2
Please note this Assembly Instruction is for all four beds. Please identify the bed part
number when ordering parts.

2210ASTa Ellison Queen Panel Bed
2213ASTa Ellison King Panel Bed
Parts List
2210ASTa_2213ASTa — Page 3 — 11/21
2212AST Queen/King Panel Rail Kit (x1)
Part
Description
Quantity
M
Small Left Bed Bracket (attached)
4
N
Small Right Bed Bracket (attached)
4
O
Side Rail
2
P
#8 x 5/8" Flat Head Screw (inserted)
24
S
#10 x 2" Pan Head Screw (inserted)
22

2210ASTa Ellison Queen Panel Bed
2213ASTa Ellison King Panel Bed
Assembly Instructions
This assembly requires two people.
2210ASTa_2213ASTa — Page 4 — 11/21
Tools Required: Phillips screwdriver
1. Remove the Slats (D) from the back of the Headboard (A) and place them off to the side. See
Figure 1.
2. To attach the Footboard (Ba) to the Side Rail (O), align the Brackets and slide the Side Rail (O)
down on to the Footboard (Ba). See Figures 2 and 2a.
Fig. 2
O
Ba
Fig. 2a
Fig. 1
Shipping Straps
D
A

2210ASTa Ellison Queen Panel Bed
2213ASTa Ellison King Panel Bed
Assembly Instructions
This assembly requires two people.
2210ASTa_2213ASTa — Page 5 — 11/21
3. Repeat step two for the other side. See Figures 3 and 3a.
4. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (A). See Figure 4.
Fig. 4
A
Fig. 3
O
Fig. 3a

2210ASTa Ellison Queen Panel Bed
2213ASTa Ellison King Panel Bed
Assembly Instructions
This assembly requires two people.
2210ASTa_2213ASTa — Page 6 — 11/21
5. Attach an Assembled Foot (C) to four of the five Slats (D) as shown in Figure 5.
6. Move the bed assembly to its final position. Position the Slats (D) on the bottom edges of the
rails and place the slat without the Assembled Foot nearest to the Footboard. Attach with
#8 x 1-1/4" Black Screws (G). See Figure 6.
7. Adjust the Adjustable Glides with Hex Nut (E) on the Assembled Feet (C) so the Glides (E)
touch the floor, making sure the Assembled Feet bear weight.
E
Fig. 7
C
G
x 10
Fig. 6
G
Slat without
an
Assembled
Foot.
D
D
Fig. 5
X 4
C