Whittier Wood Furniture Ellison 2115ASTa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/20
Ellison Nightstands
AST = Astoria Sky finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
2115ASTa
Ellison
Small 3-Drawer
Nightstand
2116ASTa
Ellison
3-Drawer
Nightstand
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2115ASTa Ellison Small 3-Drawer Nightstand
2116ASTa Ellison 3-Drawer Nightstand
Parts List
2115ASTa_2116ASTa — Page 2 — 05/20
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
2115ASTa
2116ASTa
A
Top Assembly (attached)
1
1
B
Case
1
1
C
Small Drawer Box (inserted)
1
1
D
Medium Drawer Box (inserted)
1
1
E
Large Drawer Box (inserted)
1
1
F
Small Drawer Face (installed)
1
1
G
Medium Drawer Face (installed)
1
1
H
Large Drawer Face (installed)
1
1
I
Base (attached)
1
1
J
Drawer Slides (pre-installed sets)
3
3
K
#6 x 3/4" Philtruss Screw (inserted)
18
18
L
#6 x 1/2" Philtruss Screw (inserted)
18
18
N
#8 x 1-3/8" Lo-Profile Screw (inserted)
10
12
O
#8 x 1" Pan Head Screw (inserted)
6
6
P
#8 x 1-1/4" Pan Head Screw (inserted)
6
6
Q
#8 x 7/8" Black Lo-Profile Screw (inserted)
21
22
R
#8 x 1-3/4" Pan Head Screw (inserted)
8
8
S
#8 x 1-5/8" Black Screw (inserted)
8
8
T
#8 x 1-5/8" Machine Screw Tuscan (installed)
6
6
U
1/4" x 20mm Insert Nut (inserted)
4
4
V
Antique Pewter Pull (attached)
3
3
X
Slotted Leveler (installed)
4
4
Y
Leveler Adjustment Key (attached to Owners Manual)
1
1
2116 shown in the illustrations.

2115ASTa Ellison Small 3-Drawer Nightstand
2116ASTa Ellison 3-Drawer Nightstand
Assembly Instructions
2115ASTa_2116ASTa — Page 3 — 05/20
Tool Required: Phillips Screwdriver.
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety
Guide.
1. Remove screws from the plywood supports and side aprons. Recycle or discard. See Figure 1.
2. Place the unit at its final destination. Use the Leveler Adjustment Key (Y), found in the Zip bag
taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (X) on the bottoms
of the legs until the unit is level. See Figures 2 and 2a.
Fig. 1
Plywood Supports
Fig. 2
X
X
Loose
Tight
X
Fig. 2a
Y
Fig. 1