Whittier Wood Furniture McKenzie 3506AFGAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 01/13
Model #
3506AFGAC; 3506AFCAF
McKenzie Console Desk
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for
commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and
supports.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

3506AFGAC; 3506AFCAF McKenzie Console Desk
Parts List
3506AFGAC_3506AFCAF —Page 2 —01/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Lift Top Assembly (attached)
1
B
Fixed Top (attached)
1
C
Case Assembly
1
D
Left Side Assembly
1
E
Right Side Assembly
1
G
Door Assembly (attached)
1
H
Hutch Drawer (inserted)
2
I
Large Knob (attached)
3
J
#8 x 1" Machine Screw (installed)
3
K
Small Knob (attached)
2
L
4x25mm Machine Screw (installed)
2
M
Cam Housing (inserted)
2
N
Cam Connector (inserted)
2
O
Oval Hinge (attached)
3
P
#8 x 5/8" Flat Head Screw (inserted)
18
Q
Cut Away Hinge (attached)
4
R
#8 x 1-3/16" Flat Head Screw (inserted)
16
S
Lid Support (attached)
2
T
#5 x 5/8" Flat Head Screw (inserted)
4
U
Magnetic Lock & Plate (attached)
2 sets
V
#6 x 5/8" Undercut Screw (inserted)
4
W
#6 x 5/8" Philtruss Screw
12
(6 inserted)
X
#8 x 1" Pan Head Screw (inserted)
4

3506AFGAC; 3506AFCAF McKenzie Console Desk
Parts List
3506AFGAC_3506AFCAF —Page 3 —01/13
Part
Description
Quantity
Y
#8 x 1-1/4" Pan Head Screw (inserted)
8
(6 inserted)
ZA
#8 x 1-1/4" Black Screw (inserted)
4
ZB
1/4" x 20mm Insert Nut (inserted)
4
ZC
Small Adjustable Glide (installed)
4
ZD
1/4" x 13.5mm Insert Nut (inserted)
6
ZE
1/4" x 40mm Bolt
6
ZF
Wood Dowel (inserted)
2
ZG
Velvet Pad (attached)
4
ZH
Hex Wrench
1
ZI
Short Velvet Pad (attached)
2
ZJ
#8 Washer (inserted)
2

3506AFGAC; 3506AFCAF McKenzie Console Desk
Assembly Instructions
3506AFGAC_3506AFCAF —Page 4 —01/13
Tools Required: Hex Wrench (provided); Phillips Screwdriver, Mallet or Padded Hammer.
1. Remove the Hutch Drawers (H) from the Case Assembly (C). Turn the Case Assembly (C)
upside-down on a clean protected surface. Using the Hex Wrench (ZH) attach the Left Side
Assembly (D) to the case assembly with two 1/4" x 40mm Bolts (ZE). Fasten securely. Make
sure the dowel is fully seated in place by tapping the Left Side Assembly (D) with a rubber
mallet. See Figure 1.
2. Using the Hex Wrench (ZH) attach the Right Side Assembly (E) to the case assembly with two
1/4" x 40mm Bolts (ZE). Fasten securely. Make sure the dowel is fully seated in place by
tapping the Right Side Assembly (E) with a rubber mallet. See Figure 2.
Fig. 1
ZE
x 2
ZE
D
Tap this area with
a rubber mallet.
Fig. 2
ZE
x 2
ZE
E
Tap this area with
a rubber mallet.

3506AFGAC; 3506AFCAF McKenzie Console Desk
Assembly Instructions
3506AFGAC_3506AFCAF —Page 5 —01/13
3. Using the pocket drilled hole as a guide, secure the front legs of the Left Side Assembly and the
Right Side Assembly to the case assembly with two #8 x 1-1/4" Pan Head Screw (Y).
See Figures 3 and 3a.
4. Turn the table upright. Open the Lift Top (A) and Door (G). Insert the remaining 1/4" x 40mm
Bolts (ZE) into the Left and Right Side Assemblies. See Figures 4 and 4a.
Fig. 3
Y
Y
Fig. 3a
Y
Y
x 2
Fig. 4
ZE
x 2
Fig. 4a
A
ZE
A
G

3506AFGAC; 3506AFCAF McKenzie Console Desk
Assembly Instructions
3506AFGAC_3506AFCAF —Page 6 —01/13
5. Using the pilot holes, secure Back Panel to back legs of the Left Side Assembly and the Right
Side Assembly with six #6x5/8" Philtruss Screws (W). See Figure 5.
6. Insert the Hutch Drawers (H). Place the console at its final destination. Rotate the Adjustable
Glides (ZC) found at the bottom of each leg until the unit is level. See Figure 6.
Fig. 6
ZC
ZC
Fig. 5
W
x 6
W