Whittier Wood Furniture Stonewood Cal-King 1733RGBa User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 05/17
Stonewood Beds
RGB = Rustic Glazed Brown finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
1733RGBa
Stonewood Cal-King
Storage Bed
1752RGBa
Stonewood Cal-King
Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Parts List
1733RGBa_1752RGBa — Page 2 — 05/17
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
1736RGBa
Cal-King Headboard/Footboard Kit (x1)
Part
Description
Quantity
Aa
Headboard Assembly
1
Ba
Footboard Assembly
1
P
#8 x 1-5/8" Black Screw (inserted)
11
R
#8 x 1" Black Screw (inserted)
32
ZB
Left Bed Bracket (attached)
4
ZC
Right Bed Bracket (attached)
4
ZF
#6 x 5/8" Philtruss Screw (inserted)
24
ZG
#8 x 1-1/4" Pan Head Screw (inserted)
12
Please note this Assembly Instruction is for Stonewood Cal-King Storage Bed (#1733)
and Stonewood Cal-King Rail Bed (#1752). The Parts Lists for each component follow.

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Parts List
1733RGBa_1752RGBa — Page 3 — 05/17
1735RGBa Pedestal Kit (x2)
Part
Description
Quantity
Da
Pedestal
1
E
Drawer Box (assembled)
3
Fa
Drawer Face (attached)
3
G
Trestle with T-Nuts (36-1/4")
2
H
Center Deckboard
1
I
Notched Deckboard (attached)
1
J
Assembled Foot (attached)
2
K
20" Drawer Slides (pre-installed sets)
3
L
#6 x 3/4" Philtruss Screw (inserted)
18
M
#6 x 1/2" Philtruss Screw (inserted)
18
N
#8 x 7/8" Black Lo-Profile Screw (inserted)
18
O
#8 x 1-1/4" Black Screw
26
(18 inserted)
P
#8 x 1-5/8" Black Screw (inserted)
16
Q
#8 x 2" Black Screw (inserted)
12
R
#8 x 1" Black Screw (inserted)
36
S
#8 x 1-1/2" Machine Screw Tuscan (installed)
3
T
#10 x 3/4" Pan Head Screw (inserted)
16
U
1/4" Flat Washer
4
V
1/4" T-Nut (inserted)
8
X
1/4" x 1-1/2" Hex Bolt
4
Y
Knob (attached)
3
ZA
Knob Plate (attached)
3
ZB
Left Bed Bracket (attached)
2

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Parts List
1733RGBa_1752RGBa — Page 4 — 05/17
1735RGBa Pedestal Kit (x2)_Cont.
Part
Description
Quantity
ZC
Right Bed Bracket (attached)
2
ZD
Foot Bracket (attached)
4
ZE
Adjustable Glide (installed)
4
1754RGBa Cal-King Rail Kit (x1)
Part
Description
Quantity
O
#8 x 1-1/4" Black Screw
10
P
#8 x 1-5/8" Black Screw (inserted)
22
V
1/4" T-Nut (inserted)
5
ZB
Left Bed Bracket (attached)
4
ZC
Right Bed Bracket (attached)
4
ZI
Slat
5
ZJ
Assembled Foot
5
ZK
#6 x 3/4" Flat Head Screw (inserted)
32
ZL
Adjustable Glide with Hex Nut (installed)
5
ZM
5/16" x 3/4" Insert Nut (inserted)
5
ZN
1/4" x 45mm Hanger Bolt (inserted)
5
ZO
Side Rail
2

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 5 — 05/17
Tools Required: Phillips screwdriver, Slotted screwdriver, 1/2" & 7/16" open end or box end
wrench and Tape measure
Notes:
Steps 1 through 8 are for the Stonewood Cal-King Storage Bed (#1733).
Steps 9 through 14 are for the Stonewood Cal-King Bed (#1752).
1. Place both Pedestals (Da) approximately 74" apart as shown in Figure 1.
2. To attach the Footboard (Ba) to the Pedestal (Da), align the Brackets and slide the Pedestal
(Da) down on to the Footboard (Ba). See Figures 2 and 2a.
Fig. 2
Da
Ba
Fig. 2a
Fig. 1
74"
Da

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 6 — 05/17
3. Repeat step two for the other side. See Figures 3 and 3a.
4. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the
Headboard (Aa). See Figure 4.
Fig. 4
Aa
Fig. 3
Da
Fig. 3a

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 7 — 05/17
5. Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Trestle with T-Nuts (G) on the outside surfaces of the first upper left and right braces so
that the T-Nuts (V) sit near the top. See Figure 5a. Line up the upper edges of the trestle and
braces so they are nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (X) and Washers (U) and
tighten. Repeat for the second upper brace. See Figures 5 and 5a.
Fig. 5
G
First brace
Second brace
Footboard
Headboard removed for illustration purposes.
Fig. 5a
U
Brace
X
U
x 4
x 4
X
G

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 8 — 05/17
6. Face the Headboard and stand in between the third and fourth braces. Place a Trestle with
T-Nuts (G) on the outside surfaces of the third upper left and right braces so that the T-Nuts (V)
sit near the top. See Figures 6 and 6a. Line up the upper edges of the trestle and braces so they
are nearly flush. Insert two 1/4" x 1-1/2" Hex Bolts (X) and Washers (U) and tighten.
Repeat for the fourth braces.
Fig. 6
Fourth brace
Third brace
G
Fig. 6a
U
X
X
U
x 4
x 4
Brace
Trestle with T-Nuts (G)

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 9 — 05/17
7. Place your bed in its final position. Using a 1/2" wrench or Slotted screwdriver adjust the
Adjustable Glides (ZE) on the bottoms of the Assembled Feet (J) so that the top edge of the
trestles are 17" from the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 7.
8. Place the Center Deckboards (H) as shown in Figure 8 and secure with
sixteen #8x1-1/4" Black Screws (O). There should be a small gap between each deckboard.
This concludes the assembly process for Stonewood Cal-King Storage
Bed, if you have purchased a Stonewood Cal- King Rail Bed please
refer to the instructions beginning on page 10.
Fig. 8
O
O
x 16
H
Fig. 7

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 10 — 05/17
9. To attach the Footboard (Ba) to the Side Rail (ZO), align the Brackets and slide the Side Rail
(ZO) down on to the Footboard (Ba). See Figures 9 and 9a.
10. Repeat step twelve for the other side. See Figures 10 and 10a.
Fig. 10
ZO
Fig. 10a
Fig. 9
ZO
Ba
Fig. 9a

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 11 — 05/17
11. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the
Headboard (Aa). See Figure 11.
12. Attach Assembled Feet (ZJ) to five Slats (ZI) as shown in Figure 12.
ZI
Fig. 12
ZJ
Fig. 11
Aa

1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 12 — 05/17
13. Move the bed assembly to its final position. Position the Slats (ZI) on the bottom edges of the
rails. Attach with #8 x 1-1/4" Black Screws (O). See Figure 13.
14. Using a ½" wrench to adjust the Adjustable Glides (ZE) with Hex Nut (ZL) on the Assembled
Feet (ZJ) so the Glides just touch the floor, making sure the Assembled Feet bear weight. See
Figure 14.
ZL
Fig. 14
ZJ
O
x 10
Fig. 13
O
ZI