Whittier Wood Furniture Northgate 7142GDRC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 09/11
Model #
7142GDRC
Northgate Cal-King Storage Bed
Glazed Dark Chestnut finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for
commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•Before you load or move this unit, tighten all screws
and supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
•This assembly requires two people.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, contact Whittier Wood Products customer service
department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

7142GDRC Northgate Cal-King Storage Bed
Parts list
7142GDRC — Page 2 — 09/11
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
7146GDRC Headboard Kit (x1)
Part Description Quantity
A Headboard Assembly 1
B Headboard Accent (attached) 1
C Left Bracket (attached) 2
D
Right Bracket (attached) 2
E 90oSteel Brace (attached) 2
F #6 x 3/4" Brass Flat Head Screw (inserted) 14
G #8 x 1" Black Screw (inserted) 16
H #8 x 1-3/16" Pan Head Screw (inserted) 9
I #8 x 1-1/4" Pan Head Screw (inserted) 2

7142GDRC Northgate Cal-King Storage Bed
Parts list
7142GDRC — Page 3 — 09/11
7145GDRC Footboard Kit (x1)
Part Description Quantity
C Left Bracket (attached) 2
D Right Bracket (attached) 2
F #6 x 3/4" Brass Flat Head Screw (inserted) 4
G #8 x 1" Black Screw (inserted) 16
H #8 x 1-3/16" Pan Head Screw (inserted) 9
I #8 x 1-1/4" Pan Head Screw (inserted) 6
J Footboard Assembly 1
K Top Slat 3
L Bottom Slat 2
M Drawer Box (assembled) 2
N Drawer Face (attached) 2
O Bottom Deckboard 2
P Top Deckboard 1
Q Top Notched Deckboard 1
R Small Assembled Foot 2
S 1/4" x 20mm Insert Nut (inserted) 6
T Hanger Bolt (inserted) 2
U Small Adjustable Glide (installed) 2
V Large Foot Assembly 2
W Foot Bracket (attached) 2
X Large Adjustable Glide (installed) 2
Y Pull (attached) 2
ZA M4 x 25mm Machine Screw (installed) 4
ZB Drawer Slides (pre-installed sets) 2
ZC #6 x 1/2" Philtruss Screw 24 (20 inserted)
ZD #6 x 3/4" Philtruss Screw (inserted) 20

7142GDRC Northgate Cal-King Storage Bed
Parts list
7142GDRC — Page 4 — 09/11
7145GDRC Footboard Kit (x1)
Part Description Quantity
ZE 1/4" x 1-1/2" Hex Bolt 4
ZF Washer 4
ZG 90oBracket 2
ZH #6 x 5/8" Philtruss Screw 32 (8 inserted)
ZI 1/4" x 1/2” Insert Nut (inserted) 2
ZJ #8 x 1" Lo-Profile Screw (inserted) 12
ZK Lever Lock (attached) 2
ZL Pad Strip (attached) 6

7142GDRC Northgate Cal-King Storage Bed
Parts list
7142GDRC — Page 5 — 09/11
7144GDRC Cal-King Bed Rail Kit (x1)
Part Description Quantity
C Left Bracket (attached) 4
D Right Bracket (attached) 4
F #6 x 3/4" Brass Flat Head Screw (inserted) 4
G #8 x 1" Black Screw (inserted) 32
ZM Left Side Rail 1
ZN Right Side Rail 1
ZO Plate (attached) 2

7142GDRC Northgate Cal-King Storage Bed
Assembly Instructions
7142GDRC — Page 6 — 09/11
This assembly requires two people.
Tools Required: Phillips screwdriver, 7/16" open end or box end wrench.
1. Align the inserts in the Footboard Assembly (J) with predrilled holes in the Large Foot
Assemblies (V). Attach as shown in Figure 1 with 1/4" x 1-1/2Hex" Bolts (ZE) and Washers (ZF).
2. To attach the Footboard Assembly (J) to the Left Side Rail (ZM), align the Brackets (C) and slide
the Left Side Rail down on to the Footboard Assembly (J). See Figures 2 and 2a.
C
Fig. 2
ZM
Fig. 2a
J
ZE
Fig. 1
ZE
ZF x 4 x 4
ZF
J
V

7142GDRC Northgate Cal-King Storage Bed
Assembly Instructions
7142GDRC — Page 7 — 09/11
3. Repeat step two for the Right Side Rail (ZN) and Brackets (D). See Figures 3 and 3a.
4. Align the Brackets on both sides and slide the Rail/Footboard assembly down on to the
Headboard (A). See Figure 4.
Fig. 3
ZN
Fig. 3a
D
Fig. 4
A

7142GDRC Northgate Cal-King Storage Bed
Assembly Instructions
7142GDRC — Page 8 — 09/11
5. Lock the Footboard Assembly (J) to the Side Rails by fitting the bales of the Lever Locks (ZK)
over the Plates (ZO). See Figure 5 and 5a.
6. Attach a Small Assembled Foot (R) to each of the two of the Bottom Slats (L) as shown in
Figure 6.
L Fig. 6
X 2
R
Headboard removed for illustration purposes.
Fig. 5a
Lock Position
Fig. 5
ZK
ZO

7142GDRC Northgate Cal-King Storage Bed
Assembly Instructions
7142GDRC — Page 9 — 09/11
7. Place the bed at its final location.
8. Position the Bottom Slats (L) on the bottom notched edges of the rails. Adjust the glides on the
bottoms of the Small Assembled Foot (R) so they bear weight. See Figure 8.
9. The Bottom Deckboards (O) has a notch-cut on the corner to clear the brackets of the
Headboard and a notch-cut centered at the end to clear the Large Foot Assemblies. Slide the
notched corners of the Bottom Deckboards (O) over brackets at the headboard end of the
assembly as shown in Figure 9. There should be a small gap between each deckboard. Secure
with #6x5/8" Philtruss Screws (ZH).
ZH x 24
O
ZH
Fig. 9
Fig. 8
L

7142GDRC Northgate Cal-King Storage Bed
Assembly Instructions
7142GDRC — Page 10 — 09/11
10. Place the three Top Slats (K) into the slotted brackets of both the Headboard and Footboard as
shown in Figure 10. Note that this open area can be used for storage.
11. Attach the center Top Slat (K) to the Headboard and Footboard bracket using a 90° bracket
(ZG) and #6 x 1/2" Philtruss Screws (ZC) as shown in Figure 11 and 11a.
Fig. 10
K
K
Fig. 11
ZG
ZC x 2 x 4 ZG
ZC ZC
Fig. 11a
K