Whittier Wood Furniture McKenzie Alder 1524AEGAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
10/13
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
•Before you begin your project, completely read the Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement floor.)
•Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over. Use of
tip-over restraints may only reduce but not eliminate the risk of tip-over.
To help prevent tip-over:
•Place heaviest items in the bottom drawers.
•Unless specifically designed to accommodate, do not set TVs or other
heavy objects on top of this product.
•Never allow children to climb or hang on drawers, doors or shelves.
•Never open more than one drawer at a time.
Warning: At least one tipping restraint kit was included with your piece of
Whittier Wood Furniture. When you receive your furniture, be sure to find
and properly install the tipping restraint(s). If you cannot locate the
restraint(s), please contact us immediately for replacement.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Assembly Instructions
AEGAC = Glazed Antique Cherry finish
AECAF = Caffè finish
McKenzie Alder Bookcases: 60"- 84"h
IMPORTANT NOTES:
• For normal household use only. Not recommended for commercial use.
• Do not climb, sit or stand on this piece of furniture.
• Do not overload the shelves.
• Unload items before you move this unit.
• Before you load or move this unit, tighten all screws and supports.
• For maximum stability, attach unit to the wall using the enclosed
hardware as per instructions and supports.
1524AEGAC
1524AECAF
1523AEGAC
1523AECAF
1526AEGAC
1526AECAF
1534AEGAC
1534AECAF
1533AEGAC
1533AECAF
1536AEGAC
1536AECAF
1544AEGAC
1544AECAF
1543AEGAC
1543AECAF
1546AEGAC
1546AECAF
24" Wide
30" Wide
36" Wide 36" x 72"
36" x 60"
36" x 84"
30" x 72"
30" x 60"
30" x 84"
24" x 72"
24" x 60"
24" x 84"

1536AECAF
1546AECAF
1526AECAF
1536AEGAC
1546AEGAC
1526AEGAC
1524AECAF
1534AECAF
1544AECAF
1534AEGAC
1533AECAF
1533AEGAC
1544AEGAC
1543AECAF
1543AEGAC
1524AEGAC
Before you begin to assemble this unit, identify each part and
make sure the quantities received match what is on this list.
If you need to replace a part, please refer to the following list for the part name and letter code.
Page 2 — 24-36w_60-84h — 10/13
Glazed Antique Cherry finish (AEGAC) &
Caffè finish (AECAF)
McKenzie Alder Bookcase — Parts List
A — Adjustable Shelf
1523AEGAC
1523AECAF
Model #
B — Shelf Bracket
Qty. 4
Qty. 5
1524AEGAC
shown
A
D
A
A
}
Model #
}
}
1544AECAF
1546AECAF
1536AECAF
1544AEGAC
1546AEGAC
1536AEGAC
1533AECAF
1524AECAF
1534AECAF
1524AEGAC
1543AECAF
1543AEGAC
1534AEGAC
1526AECAF
1526AEGAC
1533AEGAC
1523AEGAC
1523AECAF
Qty. 13
Qty. 22
}
}
1536AECAF
1546AECAF
1526AECAF
1536AEGAC
1546AEGAC
1526AEGAC
1524AECAF
1534AECAF
1544AECAF
1534AEGAC
1533AECAF
1533AEGAC
1544AEGAC
1543AECAF
1543AEGAC
1524AEGAC
1523AEGAC
1523AECAF
Qty. 16
Qty. 20
}
Model #
}
1536AECAF
1546AECAF
1526AECAF
1536AEGAC
1546AEGAC
1526AEGAC
1524AECAF
1534AECAF
1544AECAF
1534AEGAC
1533AECAF
1533AEGAC
1544AEGAC
1543AECAF
1543AEGAC
1524AEGAC
1523AEGAC
1523AECAF
Qty. 16
Qty. 20
}
C — #6x1/2"
Undercut Screw
Model #
D — Top — Qty. 1
(attached)
G — #8 x 1" Pan Head Screw
(inserted)
I — Small Adjustable Glide
— Qty. 4 (inserted)
H — Nylon Insert
— Qty. 4 (inserted)
TB — Bookcase Tipping
Restraint — Qty. 1
A
Model #
1544AECAF
1546AECAF
1543AECAF
1544AEGAC
1546AEGAC
1543AEGAC
1524AECAF
1533AECAF
1536AECAF
1533AEGAC
1526AECAF
1526AEGAC
1536AEGAC
1534AECAF
1534AEGAC
1524AEGAC
1523AEGAC
1523AECAF
Qty. 8
Qty. 10
}
}
J — #8 x 1-1/4" Pan Head Screw
(inserted)

Tool Required: Phillips Screwdriver, Pencil
Page 3 — 24-36w_60-84h — 10/13
1.
To move the adjustable shelves:
Determine where you want to place the Adjustable Shelves (A). Remove the #6 x 1/2" Undercut
Screws (C) from the underside of the shelf and take out the Shelf and Shelf Brackets (B). Insert the
Shelf Brackets (flat side down) into the four different holes and insert the shelf. You may secure
them by inserting #6 x 1/2" Undercut Screws (C).
2. Place the bookcase at your desired location. Level the unit using the Adjustable Glides (I) located on
the bottom of the unit.
Fig. 1
Fig. 1a
B
C
1524AEGAC shown
A
Glazed Antique Cherry finish (AEGAC) &
Caffè finish (AECAF)
McKenzie Alder Bookcase
Assembly Instructions
Continued on Page 4

Page 4 — 24-36w_60-84h — 10/13
Bookcase Tipping Restraint Instructions
Before you begin this assembly, identify each part and make sure the quantities received match what is on this
list. If you need to replace a part, contact Whittier Wood Furniture customer service and refer to the following
list for its name and letter code.
Part Description Quantity
A Cam Buckle and Short Strap (installed) 1
BPlastic Bracket (installed) 1
C 1" x 1000mm Long Strap (installed) 1
D#8 x 3" Pan Head Screw 2
F Washer (installed) 1
G#8 x 5/8" Pan Head Screw
2
(1 inserted)
H#8 x 1-1/4" Pan Head Screw 1
I“L” Angle Bracket 1
If you have a stone or tile floor or do not wish to drive screws into the corner of the baseboard
and floor see the instruction included inside the tipping restraint kit for an alternate installation.
3.
Fig. 3
D x 2
Fig. 3a Wall
Floor
D
Floor
Baseboard
Decide where you want to place the bookcase in your room. Mark the baseboard with a pencil
mark directly behind the location where the tipping restraint is attached to your item. Move the
item away from the wall far enough to allow you to access the spot where the baseboard meets
the floor. Position the straps and Plastic Bracket (B) as shown in Figures 3 and 3a with the
angled corners of the Plastic Bracket (B) firmly placed against the seam of the baseboard and
floor. Attach by driving #8 x 3" Pan Head Screws (D) through the holes in the Plastic Bracket (B)
into the seam below the baseboard where it meets the floor. See Figures 3 and 3a.

Page 5 — 24-36w_60-84h — 10/13
Move the item back into position against the wall and reach underneath the bookcase to grasp
the loop in the free end of the strap. Pull the free end of the strap until portion between the Cam
Buckle (A) and the bottom of the item is tight. See Figures 4 and 4a. If you need to move the
bookcase reach beneath and locate the buckle which connects the two sections of the strap and
depress the release lever, then pull on the section of strap that is between the buckle and the
bottom of the furniture until there is enough slack to allow you to pull the item away from the wall.
4.
Fig. 4a
Fig. 4
C
Wall
Floor