Whittier Wood 1152GBCH User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 03/12
Model #
1152GBCH
Cascade
1-Door Chest
Glazed Black Cherry finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended to
use this product in a commercial setting.
•Do not climb, sit or stand on or in this piece of furniture.
•Do not overload the drawers.
•Unload items before you move this unit.
•Before you load or move this unit, tighten all screws
and supports.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
•Place heaviest items in the bottom drawers.
•Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
•Never allow children to climb or hang on drawers,
doors or shelves.
•Never open more than one drawer at a time.
Properly installing tip-over restraints may reduce but
does not eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, contact Whittier Wood Products customer service
department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1152GBCH Cascade 1-Door Chest
Parts List
1152GBCH — Page 2 — 03/12
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter(s) and part name.
Part Description Quantity
A Top Assembly (attached) 1
B Case 1
C Adjustable Shelf (installed) 2
D Door (attached) 1
E Small Drawer Box (inserted) 5
F Bottom Drawer Box (inserted) 1
G Small Drawer Face (installed) 5
H Bottom Drawer Face (installed) 1
I Small Pull (attached) 6
J #8 x 1-1/2" Machine Screw (installed) 10
K Large Pull (attached) 2
L #8 x 1-1/4" Machine Screw (installed) 6
M Drawer Slides (pre-installed sets) 6
N #6 x 1/2" Philtruss Screw (inserted) 36
O #6 x 3/4" Philtruss Screw (inserted) 36
P Insert Nut (inserted) 4
Q Adjustable Glide (installed) 4
R #8 x 7/8" Lo-Profile Screw (inserted) 28
S Shelf Bracket (attached) 8
T #6 x 1/2" Undercut Screw (inserted) 8
U Hinge (attached) 2
V #6 x 5/8" Flat Head Screw (inserted) 12
W Magnetic Catch Kit (installed) 1 set
X #6 x 5/8" Philtruss Screw (inserted) 2
Y #6 x 5/8" Undercut Screw (inserted) 2

1152GBCH Cascade 1-Door Chest
Parts List
1152GBCH — Page 3 — 03/12
Part Description Quantity
ZA #8 x 1-1/4" Pan Head Screw (inserted) 25
ZB #8 x 1-1/4" Black Screw (inserted) 6
ZC #8 x 1-5/8" Black Screw (inserted) 3
TR Furniture Tipping Restraint 2 sets

1152GBCH Cascade 1-Door Chest
Assembly Instructions
1152GBCH — Page 4 — 03/12
Tool Required: Phillips Screwdriver
1. Place the chest at its final destination. Rotate the Adjustable Glides (Q) on the bottoms of the
legs until the unit is level. See Figure 1.
2. To move the Adjustable Shelves (C), remove the #6 x 1/2" Undercut Screws (T) and the Shelf
(C). Position the Shelf Brackets (S) to the desired locations, replace the shelf and insert the
screws. See Figures 2 and 2a.
C
Fig. 2
Door removed for illustration purposes.
C S
TFig. 2a
Q
Q
Fig. 1

1152GBCH Cascade 1-Door Chest
Assembly Instructions
1152GBCH — Page 5 — 03/12
3. Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 3a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 3b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 3c and 3d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 3a
T1
T
3
T
4
T
1
Fig. 3b
Pull tight
Fig. 3d
T1
T
2
T
3
T
4
Fig. 3c Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.