Whittier Wood 3510GAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/17
Model #
3510GAC
3510CAF
McKenzie Round
End Table (26"D)
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Unload items before you move this unit.
•Do not overload the shelf or drawer.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

3510GAC 3510CAF McKenzie Round End Table (26"D)
Parts List
3510GAC_3510CAF — Page 2 — 08/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly
1
B
Leg
4
C
Shelf
1
D
Drawer (inserted)
1
E
Wood Slide (installed)
2
F
Drawer Stop (attached)
1
G
#8 x 1-3/8" Lo-Profile Screw (inserted)
9
H
#8 x 1-1/4" Pan Head Screw
19
(7 inserted)
I
#8 x 7/8" Black Lo-Profile Screw (inserted)
1
J
4 x 25mm Machine Screw (installed)
1
K
#10 x 2" Pan Head Screw (inserted)
6
L
#8 Washer (inserted)
9
M
1/4" x 20mm Insert Nut (inserted)
4
N
Knob (attached)
1
O
Adjustable Glide (installed)
4

3510GAC 3510CAF McKenzie Round End Table (26"D)
Assembly Instructions
3510GAC_3510CAF — Page 3 — 08/17
Tools Required: Phillips Screwdriver, Rubber Mallet or Padded Hammer
1. Turn the Top Assembly (A) upside down on a clean, protected surface. Position the Drawer
Stop (F) so that it is unlocked, remove the Drawer (D) and place it off to the side. See Figures1,
1a and 1b.
2. Place a Leg (B) in a corner of the Top Assembly (A). See Figure 2.
Fig. 2
B
A
Fig. 1
Fig. 1a
A
Locked
Position
Unlocked
Position
Fig. 1b
F
D
F
F

3510GAC 3510CAF McKenzie Round End Table (26"D)
Assembly Instructions
3510GAC_3510CAF — Page 4 — 08/17
3. Using the pocket hole as a guide, secure the Leg (B) to the Top Assembly (A) with one
#8 x 1-1/4" Pan Head Screw (H). See Figures 3 and 3a.
4. Place a second Leg (B) in a corner of the Top Assembly (A) and using the pocket hole as a
guide, secure the Leg (B) with one #8 x 1-1/4" Pan Head Screw (H). See Figure 4.
Fig. 4
B
A
H
x 1
Fig. 3
H
x 1
Fig. 3a
H

3510GAC 3510CAF McKenzie Round End Table (26"D)
Assembly Instructions
3510GAC_3510CAF — Page 5 — 08/17
5. Place a third Leg (B) in a corner of the Top Assembly (A) and using the pocket hole as a guide,
secure the Leg (B) with one #8 x 1-1/4" Pan Head Screw (H). See Figure 5.
6. To attach the Shelf (C) align three of the pocket screw holes with the notches of the legs and
slide the Shelf (C) into the notches. Be sure the grain of the Shelf (C) is in line with the grain of
the top. Place the final Leg (B) in the remaining corner, using the pocket hole as a guide, secure
the Leg (B) with one #8 x 1-1/4" Pan Head Screw (H). See Figure 6.
Fig. 6
B
C
H
x 1
Fig. 5
B
A
H
x 1

3510GAC 3510CAF McKenzie Round End Table (26"D)
Assembly Instructions
3510GAC_3510CAF — Page 6 — 08/17
7. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with four #8 x 1-1/4" Pan
Head Screws (H). See Figures 7 and 7a.
8. Using the pocket holes as guides, secure the side aprons to the Legs (B) with four #8 x 1-1/4"
Pan Head Screws (H). See Figures 8 and 8a.
Fig. 8
H
x 4
H
Fig. 8a
Fig. 7
H
x 4
H
Fig. 7a

3510GAC 3510CAF McKenzie Round End Table (26"D)
Assembly Instructions
3510GAC_3510CAF — Page 7 — 08/17
9. Turn the table upright and insert the Drawer (D). Rotate the Drawer Stop (F) back to the locked
position. See Figure 9.
10. Place the table at its final destination. To level the table, rotate the Adjustable Glides (O) found
on the bottoms of the legs. See Figure 9.
Fig. 9
O
O