Whittier Wood 2072AEGSP User manual

Assembly Instructions
49"w & 54"w McKenzie
Bookcase Consoles
Production Code:
02/10
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Handle the glass plate with care. Glass is fragile.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
AEGAC = Glazed Antique Cherry finish;
AEGSP = Glazed Spice finish;
AECAF = Caffè finish
To Order: Designate the finish, provide the furniture
model number found underneath the unit, the part letter,
production code, quantity needed, reason for replacement,
your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
2072AEGSP = 49"
2072AECAF = 49"
2072AEGAC = 49"
2073AEGSP = 54"
2073AECAF = 54"
2073AEGAC = 54"
Serious or fatal crushing injuries can occur
from furniture tip-over. To help
prevent tip-over:
Use of tip-over restraints may only reduce
but not eliminate the risk of tip-over.
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
Never allow children to climb or hang on drawers,
doors or shelves.
Never open more than one drawer at a time.

2072AEGAC_AEGSP_AECAF_2073AEGAC_AEGSP_AECAF — Page 2 — 02/10
A — Top Assembly
— Qty. 1 (attached) B — Large Adjustable
Shelf — Qty. 3
D — Case Only — Qty. 1
L — Knob
— Qty. 3 (installed)
E — Large Door Frame
— Qty. 1 (installed)
F — Small Door
— Qty. 2 (installed)
M – #8 x 1-1/2" Machine Screw
— Qty. 3 (installed)
N – Shelf Bracket
2073AEGAC shown in the above drawings.
– Qty. 28 (attached) – Qty. 28 (inserted)
O – #6 x 1/2" Undercut Screw
P — Hinge — Qty. 6
(installed)
Q — #6 x 3/4" Brass Flat
Head Screw — Qty. 46
(inserted)
R — Assembled Foot
— Qty. 1 (attached)
S — T-Nut
— Qty. 2 (inserted)
T — Adjustable Glide
— Qty. 2 (installed)
G — Large Door Glass
— Qty. 1 (installed)
J — Door Glass Support Rail
— Qty. 2 (attached)
X — Magnetic Catch
— Qty. 6 (installed)
Y — #5 x 5/8" Flat Head Screw
— Qty. 24 (inserted)
U — Magnetic Plate
— Qty. 6 (installed)
K — Door Glass Support Stile
— Qty. 2 (attached)
C — Small Adjustable
Shelf — Qty. 4
I — Small Adjustable
Glide — Qty. 2 (inserted)
H — Nylon Insert
— Qty. 2 (inserted)
W — Tack Glide
— Qty. 2 (inserted)
Before you begin to assemble this unit, identify each part and
make sure the quantities received match what is on this list.
If you need to replace a part, please refer to the following list for the part name and letter code.
Glazed Antique Cherry finish (AEGAC) &
Glazed Spice finish (AEGSP) & Caffè finish (AECAF)
49" Wide & 54" Wide McKenzie Bookcase Console — Parts List
TR — Tipping
Restraint — Qty. 2
Z — 8 x 1-1/4" Pan
Head Screws — Qty. 4

2. To move the Adjustable Shelves (B & C), remove the #6 x 1/2" Undercut Screws (O) and the Shelves
(B & C). Reposition the Shelf Brackets (N) to the desired positions, replace the shelf and insert
the screws. See Figures 2 and 2a.
Place the console at your desired location. Rotate the Adjustable Glides found at the front
corners of the unit and at the bottoms of the Assembled Foot (R) until the unit is level. See Figure 2.
Doors removed for purposes of
this illustration.
Fig. 2
Fig. 2a O
N
B
CC
TOOL REQUIRED: Phillips Screwdriver
2072AEGAC_AEGSP_AECAF_2073AEGAC_AEGSP_AECAF — Page 3 — 02/10
R
3. Locate two studs in the wall behind the unit. Attach one Clip (T1) to one wall stud with two #8 x 2"
Black Screws (T3). See Figure 3a. Attach a second clip the the unit with #8 x 1" Pan Head Screws
(T4). See Figure 3b. Connect the two clips with the Nylon Restraint Strap (T2). Pull the Nylon
Restraint Strap (T2) tight so there is no slack. See Figures 3a and 3b. Repeat this step to attach
the second tipping restraint. If you cannot locate two studs, purchase the proper wall attachment
hardware for your type of wall and secure the unit.
Tipping Restraint (TR)
Fig. 3a
Fig. 3c
Fig. 3d
T1
ZC
T3
ZD
T1
T2
Fig. 3b
T4
T1
Glazed Antique Cherry finish (AEGAC) &
Glazed Spice finish (AEGSP) & Caffè finish (AECAF)
49" Wide & 54" Wide McKenzie Bookcase Console
— Assembly Instructions
Tighten the Nylon Restrain
Strap (T2) so there is no slack.
Pull tight.