Whittier Wood 3494GAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/17
Model #
3494GAC
3494CAF
McKenzie Round
Accent Table
(19-1/2"D)
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Unload items before you move this unit.
•Do not overload the shelf or drawer.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

3494GAC 3494CAF McKenzie Round Accent Table (19-1/2"D)
Parts List
3494GAC_3494CAF — Page 2 — 08/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly
1
B
Leg
4
C
Shelf
1
D
#8 x 1-3/8" Lo-Profile Screw (inserted)
8
E
#8 x 1-1/4" Pan Head Screw
12
F
1/4” X 20mm Insert Nut (inserted)
4
G
Adjustable Glide (installed)
4

3494GAC 3494CAF McKenzie Round Accent Table (19-1/2"D)
Assembly Instructions
3494GAC_3494CAF — Page 3 — 08/17
Tools Required: Phillips Screwdriver, Rubber Mallet or Padded Hammer
1. Turn the Top Assembly (A) upside down on a clean, protected surface. Place a Leg (B) in a
corner of the Top Assembly (A). See Figure 1.
2. Using the pocket hole as a guide, secure the Leg (B) to the Top Assembly (A) with one
#8 x 1-1/4" Pan Head Screw (E). See Figures 2 and 2a.
Fig. 2
E
x 1
Fig. 2a
E
Fig. 1
B
A

3494GAC 3494CAF McKenzie Round Accent Table (19-1/2"D)
Assembly Instructions
3494GAC_3494CAF — Page 4 — 08/17
3. Place a second Leg (B) in a corner of the Top Assembly (A) and using the pocket hole as a
guide, secure the Leg (B) with one #8 x 1-1/4" Pan Head Screw (E). See Figure 3.
4. Place a third Leg (B) in a corner of the Top Assembly (A) and using the pocket hole as a guide,
secure the Leg (B) with one #8 x 1-1/4" Pan Head Screw (E). See Figure 4.
Fig. 4
B
A
E
x 1
Fig. 3
B
A
H
x 1

3494GAC 3494CAF McKenzie Round Accent Table (19-1/2"D)
Assembly Instructions
3494GAC_3494CAF — Page 5 — 08/17
5. To attach the Shelf (C) align three of the pocket screw holes with the notches of the legs and
slide the Shelf (C) into the notches. Be sure the grain of the Shelf (C) is in line with the grain of
the top. Place the final Leg (B) in the remaining corner, using the pocket hole as a guide, secure
the Leg (B) with one #8 x 1-1/4" Pan Head Screw (E). See Figure 5.
6. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with four #8 x 1-1/4" Pan
Head Screws (E). See Figures 6 and 6a.
Fig. 6
E
x 4
E
Fig. 6a
Fig. 5
B
C
E
x 1

3494GAC 3494CAF McKenzie Round Accent Table (19-1/2"D)
Assembly Instructions
3494GAC_3494CAF — Page 6 — 08/17
7. Using the pocket holes as guides, secure the side aprons to the Legs (B) with four #8 x 1-1/4"
Pan Head Screws (E). See Figures 7 and 7a.
8. Turn the table upright. See Figure 8.
9. Place the table at its final destination. To level the table, rotate the Adjustable Glides (G) found
on the bottoms of the legs. See Figure 8.
Fig. 8
G
G
Fig. 7
E
x 4
E
Fig. 7a