Whittier Wood 3810DUET User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 08/17
Addison Black Walnut Adjustable Headboard
Platform Beds
DUET finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•This assembly requires two people.
•This item has a total maximum combined weight limit
of 850 lbs. inclusive of foundation and people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
3810DUET
Addison Queen Black Walnut
Adjustable Headboard Platform Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
3812DUET
Addison King Black Walnut
Adjustable Headboard Platform Bed
3814DUET
Addison Cal-King Black Walnut
Adjustable Headboard Platform Bed

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Parts List
3810DUET_3812DUET_3814DUET — Page 2 — 08/17
Please identify the parts and check that the quantities received match those on this list. If you need
to replace a part, refer to the model number, part letter and name.
3811DUET Addison Queen Black Walnut Adjustable Platform
Headboard Kit (x1)
3813DUET Addison King Black Walnut Adjustable Platform
Headboard Kit (x1)
3815DUET Addison Cal-King Black Walnut Adjustable Platform
Headboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
18mm Flat Washer
8
C
1/4" x 20mm Insert Nut (inserted)
4
D
1/4" x 22mm Hex Bolt
4
E
1/4" x 35mm Hex Bolt
4
F
5/16" x 14mm Insert Nut (inserted)
4
G
5/16" x 35mm Hex Bolt (inserted)
4
H
Headboard L Bracket
2
I
Z Hex Wrench 5mm (attached to the right leg)
1
M
#8 x 1-3/4" Pan Head Screw (inserted)
6
V
#8 Washer (inserted)
6
Please note this Assembly Instruction is for all three beds. Please identify the bed part
number when ordering parts.

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Parts List
3810DUET_3812DUET_3814DUET — Page 3 — 08/17
3802DUET Addison Queen Platform Kit (x1)
3806DUET Addison King Platform Kit (x1)
3809DUET Addison Cal-King Platform Kit (x1)
Part
Description
Quantity
J
End Platform Assembly
1
K
Headboard Platform Assembly
1
L
#8 x 1-1/8" Lo-Profile Screw (inserted)
12
M
#8 x 1-3/4" Pan Head Screw (inserted)
12
N
#8 x 1-5/8" Black Screw (inserted)
33
O
1/4" T-Nut (inserted)
44
P
Wood Dowel (inserted)
2

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Parts List
3810DUET_3812DUET_3814DUET — Page 4 — 08/17
3803DUET
Addison Queen/King/Cal-King Platform Connector Kit (x1)
Part
Description
Quantity
B
18mm Flat Washer
40
D
1/4" x 22mm Hex Bolt
24
E
1/4" x 35mm Hex Bolt
16
Q
Foot Assembly
4
R
#6 x 3/4" Brass Flat Head Screw (Inserted)
24
S
Wool Felt Pad/Glide (Attached)
4
T
Metal Foot Bracket (Attached)
4
U
1500mm Channel
4

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Assembly Instructions
This assembly requires two people.
3810DUET_3812DUET_3814DUET — Page 5 — 08/17
Tools Required:Phillips screwdriver, 7/16" open end or box end wrench.
Tool Provided:Z shaped Hex Wrench attached to the back right leg of the Headboard. See Figure
7b.
NOTE: Remove this instruction from the Headboard Kit carton. Place Headboard and attached
hardware kit to the side (possibly in another room) to allow space for assembling the platform
portion of the bed. Open the #3803 Platform Connector Kit, which attaches the two Platforms
together.
1. Open and unfold the Platform Kit carton in the approximate location where the bed will be
placed. This will help protect the flooring and the faces of the platform components. Place the
Headboard Platform Assembly (K) face down in the approximate location where the headboard
will be located with the inside edge facing the End Platform Assembly (J). Align the Dowels (P)
in the edge of the Headboard Platform Assembly (K) with the holes in the edge of the End
Platform Assembly (J) see Figures 1 and 1a.
Fig. 1
K
J
Fig. 1a
Unfolded
Platform
carton
P

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Assembly Instructions
This assembly requires two people.
3810DUET_3812DUET_3814DUET — Page 6 — 08/17
2. Slide the two sections together so that the flat edges touch as shown in Figure 2. Using the
hardware from the #3803 Connector Kit, place the 1500mm Channels (U) on the Platform and
align over the predrilled holes in the platform. Attach the Channels (U) with 1/4" X 22mm Hex
Bolts (D) and 18mm Flat Washers (B). See Figures 2 and 2a.
Fig. 2
U
B
Fig. 2a
D
U
B
D
x 24
x 24
Hardware bag step 2

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Assembly Instructions
This assembly requires two people.
3810DUET_3812DUET_3814DUET — Page 7 — 08/17
3. Place the Foot Assemblies (Q) onto the Platform Assembly so that the holes in the metal
brackets align over the predrilled holes. The legs should angle outward toward the corner of the
platform. Attach the Foot Assemblies (Q) with 1/4" X 35mm Hex Bolts (E) and 18mm Flat
washers (B). See Figures 3 and 3a.
Fig. 3
E
Fig. 3a
B
Q
B
E
x 16
x 16
Hardware bag step 3

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Assembly Instructions
This assembly requires two people.
3810DUET_3812DUET_3814DUET — Page 8 — 08/17
4. CAUTION NEEDED: Flip the Platform Assembly over onto the feet. Use extreme care not
to bump into light fixtures, ceiling fans, walls, ceiling, or other objects in the room. Protect the
corners of the Platform. Do not apply force to the Foot Assemblies (Q). Carefully slide the
Platform carton out from beneath the Platform Assembly and recycle or discard.
5. Retrieve the Headboard and hardware kit. Position the Headboard Brackets (H) on the Platform
Assembly as shown with the longer leg of the bracket extending upward and align to the pre-
drilled holes in the bottom of the platform. Attach from the underside using 1/4" X 35mm Hex
Bolts (E) and 18mm Flat Washers (B) as shown. Finger tighten the bolts at this time. See
Figures 5 and 5a.
Fig. 5
Fig. 5a
E
B
H
B
E
x 4
x 4
Hardware bag step 5

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Assembly Instructions
This assembly requires two people.
3810DUET_3812DUET_3814DUET — Page 9 — 08/17
6. Attach the Headboard assembly (A) to the Platform Assembly as shown and secure with 1/4" X
22mm Hex Bolts (D) and 18mm Flat Washers (B). After tightening these bolts go back and
tighten the bolts securing the brackets to the bottom of the Platform Assembly. See Figures 6
and 6a.
Fig. 6
B
D
x 4
x 4
A
Fig. 6a
B
D
Hardware bag step 6

3810DUET Addison Queen Black Walnut Adjustable Headboard Platform Bed
3812DUET Addison King Black Walnut Adjustable Headboard Platform Bed
3814DUET Addison Cal-King Black Walnut Adjustable Headboard Platform Bed
Assembly Instructions
This assembly requires two people.
3810DUET_3812DUET_3814DUET — Page 10 — 08/17
7. NOTE: When completing step 7 you may wish to place your mattress onto the Bed to use as a
visual reference while adjusting the Headboard Height.
The Headboard for this bed is adjustable. It can be raised or lowered depending on the
thickness of your mattress. The holes for adjusting the height are numbered on the back of the
headboard legs. The chart below provides suggested settings based on the thickness of your
mattress. It also lists the overall height of the headboard at each setting. You may choose a
different setting for a variety of reasons. Individual preference, the number and thickness of
pillows on your bed, or the presence of a window or artwork above the Headboard are some of
the factors that might lead you to select a different setting than the one we have suggested. To
adjust the setting of the headboard use the Hex wrench (I) provided to remove the 5/16" X
35mm Bolts (G) attaching the Headboard to the Legs of the Headboard. Reposition the
Headboard so that the insert nuts in the back line up to the numbered holes that correspond to
the height you desire. Reinsert the bolts. See Figures 7 and 7a.
Screw Position
Headboard Height
Approximate Mattress Thickness Range
1
43 1/8"
>12"
2
41 7/8"
11" to 12"
3
40 3/4"
10" to 11"
4
39 3/8"
8" to 10"
Fig. 7
G
x 4
I
x 1
Fig. 7a
G
I
Fig. 7b
1
2
3
4
1
2
3
4
G
Hardware bag step 7