Whittier Wood 5196AFGMS User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 06/14
Model #
5196AFGMS
Ambierle Round
Side Table
Glazed Millstone finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the shelf.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

5196AFGMS Ambierle Round Side Table
Parts List
5196AFGMS —Page 2 —06/14
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly
1
B
Leg
4
C
Shelf
1
D
#8 x 1-1/4" Pan Head Screw
20
(16 inserted)
E
#8 x 1-3/4" Pan Head Screw (inserted)
8
F
#8 Washer (inserted)
8
G
3/8" x 1" Insert Nut (inserted)
4
H
1/4" x 20mm Insert Nut (inserted)
4
I
Adjustable Glide (installed)
4
J
5/16" Flat Washer
4
K
3/8" x 2-1/2" Hex Bolt
4

5196AFGMS Ambierle Round Side Table
Assembly Instructions
5196AFGMS —Page 3 —06/14
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Rubber Mallet or Padded
Hammer
1. Turn the Top Assembly (A) upside-down on a clean, protected surface. Place two Legs (B) in
adjacent corners of the Top Assembly (A), making sure the drilled corners of the legs face
toward the Corner Blocks. Attach with 5/16" Flat Washers (J) and 3/8" x 2-1/2" Hex Bolts (K).
See Figures 1 and 1a.
2. To attach the Shelf (C) align two of the pocket screw holes with the notches of the legs. Be sure
the grain of the Shelf (C) is in line with the grain of the top. Place a third Leg (B) in one of the
remaining corners and attach with a 5/16" Flat Washer (J) and 3/8" x 2-1/2" Hex Bolt (K). See
Figures 2 and 2a.
Fig. 2
C
J
K
x 1
x 1
Fig. 2a
K
J
B
Fig. 1
B
Fig. 1a
A
J
K
x 2
x 2
K
J

5196AFGMS Ambierle Round Side Table
Assembly Instructions
5196AFGMS —Page 4 —06/14
3. Place the remaining Leg (B) in the final corner and attach with a 5/16" Flat Washer (J) and 3/8"
x 2-1/2" Hex Bolt (K).See Figures 3 and 3a.
4. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with four #8 x 1-1/4" Pan
Head Screws (D). See Figures 4 and 4a.
Fig. 3
B
J
K
x 1
x 1
Fig. 3a
K
J
Fig. 4
D
x 4
D
Fig. 4a

5196AFGMS Ambierle Round Side Table
Assembly Instructions
5196AFGMS —Page 5 —06/14
5. Turn the table upright. See Figure 5.
6. Place the table at its final destination. To level the table, rotate the Adjustable Glides (I) found
on the bottoms of the legs. See Figure 5.
Fig. 5
I
I