Wholesale Interiors BBT 6723 User manual

ASSEMBLY INSTRUCTIONS
MODEL : BBT 6723 A1 FULL BED
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
STEP 1 STEP 2
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 20mm 2 PCS
2 JCBC BOLT M6 x 30mm 2 PCS
3 JCBC BOLT M6 x 45mm 8 PCS
4 JCBB BOLT M8 x 40mm 4 PCS
5 JCBB BOLT M8 x 50mm 12 PCS
6M6 SPRING WASHER 4 PCS
7M6 FLAT WASHER 4 PCS
8M8 SPRING WASHER 16 PCS
9M8 FLAT WASHER 16 PCS
10 WOOD SCREW M4 x 25mm 8 PCS
11 WOOD SCREW M4 x 38mm 9 PCS
12 WOOD DOWEL M10 x 30mm 8 PCS
13 M4 ALLEN KEY (BALL SHAPE) 1 PC
14 M5 ALLEN KEY (BALL SHAPE) 1 PC
15 VMB 3062 L Bracket 2 PCS
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL (L&R) 2 PCS
DCENTER RAIL 1 PC
ECENTER SUPPORT LEG 3 PCS
FLEG 4 PCS
GBED SLAT 1 SET
HSIDE RAIL SUPPORT 2 PCS
x 4
D
E
12
F
C
C
F
8
5
14
R
L
9
STEP 2.1 STEP 2.2
PAGE 1 OF 3

ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
STEP 5
C
B
14
5
8
STEP 3.1 STEP 3.2 9
STEP 5.1 STEP 5.2
STEP 5.3 STEP 5.4
48
9
14
10
10
7
6
2
13
13
1
76
A
C
A
STEP 4.1 STEP 4.2 Don't screw tied
**Finish step 5,
Please screw tied the step 4 bolt.
PAGE 2 OF 3
15

ASSEMBLY INSTRUCTIONS
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
STEP 6 STEP 7
STEP 8 STEP 9
D
AH
13
G
11
3
H
PAGE 3 OF 3