Wholesale Interiors BBT6697 User manual

PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL 2 PCS
DCENTER RAIL 1 PC
ECENTER SUPPORT 2 PCS
FCENTER SUPPORT LEG 3 PCS
GBED SLAT 24 PCS
HBED LEG 4 PCS
IHEADBOARD WINGS (L&R) 2 PCS
JHEADBOARD SUPPORT LEG 2 PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
ASSEMBLY INSTRUCTIONS
MODEL : BBT6697 FULL BED 1 of 3
STEP 2STEP 1
7
I
F
D
A
1
3
2
10
x 8
x 2
STEP A
STEP B
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 45mm 14 PCS
2 M8 FLAT WASHER 14 PCS
3 M8 SPRING WASHER 14 PCS
4 PVC BLACK WASHER 6 PCS
5BED SLAT SIDE FITTER 24 PCS
6 BED SLAT CENTER FITTER 12 PCS
7 WOOD DOWEL M10 x 30mm 4 PCS
8 WOOD SCREW M3.5 x 16mm 8 PCS
9 WOOD SCREW M4 x 20mm 2 PCS
10 M5 ALLEN KEY (BALL SHAPE) 1 PC
x 2
**Open the zip at the headboard backing and take out headboard Wings.

A
D
ASSEMBLY INSTRUCTIONS 2 of 3
STEP 3 STEP 4
STEP 5 STEP 6
C
E
8
Note: Assemble (E) vertically as picture shown.
10
1
3
2I
A
A
4
JH
4
10
B
10
H
4
10
CA
A
10
C
x 2
x 2
x 2
x 2
x 2
STEP A
STEP B
STEP A
STEP B

Palm
Palm
G
G
6
G
5
ASSEMBLY INSTRUCTIONS 3 of 3
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
STEP 7 STEP 8
STEP 9
STEP A
STEP B
D
A
9
GG
6
5
5